Black Box PDUBH14-S20-120V User Manual

February 2010

PDUBH14-S20-120V

20-Amp Horizontal PDU, 14-Outlet (5-20R)

This 20-amp, rackmounted power distribution unit uses
1U of rack space, and features 6 front and 8 rear outlets.

PDUBH14-S20-120V

MT1000A-85-R4

Specifications

Circuit Breaker: 20 A

Cord Connector: L5-20P

Cord Length: 6 ft. (1.8 m)

Cord Type: SJT 12/3C

Current Alarm: No

Current Rating: 20 amps (16A derated)

Input Voltage: 120 VAC

Metered: No

Mounting: Horizontal

Number of Outlets: 14

Outlet Location: (6) front, (8) rear

Outlet Max. Current: 20A

Outlet Type: 5-20R

Indicator: Power LED

Environmental: Operating Temperature: 32 to 104° F

(0 to 40° C);

Storage Temperature: 32 to 149° F (0 to 65° C);
Operating and Storage Humidity: 0 to 90%,
noncondensing relative

cUL Listed: Yes

RoHS: Yes

What’s included

• 14-outlet horizontal PDU

• (2) mounting brackets

• (4) mounting screws

• Specification sheet

Customer

Support

Information

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: w ww.blackbox.com • E-mail : [e-mail]

Safety Instructions

1. The PDU is designed for indoor use only in a controlled environment away from excess moisture, temperature extremes,
conductive contaminants, dust, or direct sunlight.

2. Do not connect the PDU to an ungrounded outlet or extension cords or adapters that eliminate the connection to ground.

3. The power requirement for each piece of equipment connected to the PDU must not exceed the individual outlet’s load rating.

4. The total power requirements for equipment connected to the PDU must not exceed the maximum load rating.

5. Do not drill into or attempt to open any part of the PDU. There are no user-serviceable parts inside.

6. Do not attempt to modify the PDU, including input plugs and power cables.

7. To reduce the risk of fire, connect only to a branch circuit with overcurrent protection in accordance with the National Electric
Code, ANSI/NFPA 70(3KVA).

© Copyright 2010. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond™
is a trademark of BB Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.

PDUBH14-S 20-120V, rev. 1

FREE, live, 24/7 Tech Support is just 20 seconds away.

724-746-5500 | blackbox.com