Page 1
-
I n n ovat i o n
- S ecu r i t y
- D ura b i l i ty
- F un c t i o nal i t y
User Manual
The Worlds Smallest Vehicle
DVR/Data Logger
NTC-3000
Page 2
1. Notices………………………………………………………………… 1
- Limitations of use…………………………………………………. 1
- Important Notes for use of Product……………………… 2
- Important Notes for use of Memory Card…………….. 4
- Installation Notes…………………………………………………. 5
- Notice for Safe Keeping………………………………………… 6
2. Components……………………………………………………….. 7
3. Full Technical Specification……………………...…………. 8
4. Parts and Functions…………………………………………….. 9
- User Interface………………………………………………………. 10
5. Installation Procedure and Information……………….. 11
- Inserting the Memory Card………………………………….. 11
- Choosing a Location…………………………………………….. 12
- Configuration……………………………………………………….. 13
6. Using TV OUT Function………………………………………... 14
- Setting Mode (Main Menu)………………………………….. 16
- Setting Mode (video playback)……………….……………. 17
- Setting Mode (Audio and Memory Card)……………. 18
7. Viewing Software………………………………………………… 19
- Structure of the Window……………………………………… 19
- Playing Files…………………………………………………...……. 20
- Using GPS Function and Map Location…………………. 21
- Changing the Settings…..……………………………………… 22
- Formatting the Memory Card…...………………………… 23
8. Q & A…………………………………………………………………. 24
9. Notes…………………………………………………………………. 26
10. Product Guarantee/Warranty Provision……………. 28
CONTENTS
The BLACKBOX Mobile is a video storage device to help
enhance the safety of vehicles and its passengers, which
has been developed and manufactured by BLACKBOX
Technologies.
As part of our committed after sales care we provide free
repair, service and support for all goods under warranty (1
year from date of purchase). However, please note that
service charges may apply should a problem be deemed as
not under our Warranty Terms & Conditions.
The period of warranty is calculated from the date the
goods leave the warehouse if date of purchase is not clear.
10. PRODUCT GUARANTEE/WARRANTY PROVISION
Period of Warranty
All units come with 1 year Warranty (from date of purchase) .
Limitations of the Warranty*
When the period of warranty (1 year) is over.
Damage or failure due to careless use.
Any attempted repair by the user immediately invalidates
the warranty.
When the product has been damaged by an external device.
Damages or failures due to a natural disaster.
General misuse of the product.
Failing to follow the instructions laid out in this manual.
When specifically sold with no warranty.
When product is significantly damaged in an accident.
* Please also see Section 1 Notifications.
Standard of Warranty
The Terms and Conditions and information contained within this
User Guide do not affect your statutory rights.
29
Page 3
28
10. PRODUCT GUARANTEE/WARRANTY PROVISION
This Warranty is only covered for units used within the
United States.
In circumstances relating to the limitations mentioned
on the previous page, some repairs may be charged.
WARRANTY
1
The device is a “supplementary image storage device for
vehicles”, for the automatic recording of video and voice
data while driving.
* We cannot guarantee that ALL data will be captured
at all times.
This product may be used for capturing the cause of a
traffic accident.
* We cannot be responsible for any loss or damage, due
to failure of the device to capture information.
The device will record video and voice data into two types
of file. Primarily, normal files are recorded during a typical
period of driving. However, event files are created when
triggered by excessive G-Force detected by the sensor (in
the event of accident or break-in etc.).
The device continuously records video and, if required,
audio data while driving. It’s storage time varies depending
on factors, such as, the size of SD card used and external
image conditions (number of events logged, video
complexity & number of journeys undertaken). Our tests
indicate that a standard 8GB SD card will hold about 8
hours of captured data before overwrite begins.
Importantly, always backup SD card data onto separate
storage devices, such as, a personal computer or notebook
where possible. When attempting to retain files note that
the device will overwrite the data on a first-in first-out basis.
This starts from the oldest file and works in a sequential
order. Please be aware that the over-write function initiates
not only on normal files but also on event files so it is
important to copy event files if you wish to retain them.
1. NOTICES - Limitations of Use
Page 4
1. NOTICES - Important Notes for use of Product
1. A continuous warning sound occurs when memory
card is unreadable, not inserted correctly or memory
card door is open.
2. Rating voltage of power supply is DC 12 ~ 24V.
3. Please note that the recording LED blinks after
connecting power cable.
4. Video and audio data recordings begin approximately
1 min after starting vehicle and product initialization.
5. The recording LED will not blink if the memory card is
unreadable or not inserted correctly.
6. The device will continue to record video and audio
data for about 5 to 10 seconds after power is removed.
7. Video and audio data records only when the memory
card door is closed to maximize data protection.
8. You should only connect power as recommended
using the cable supplied or similar connector.
9. The event record function will vary with the mounting
position in the vehicle. This is due to the G-Sensor
sensitivity changing with its position in the vehicle.
10. Use only BLACKBOX recommended memory cards for
high speed storage and data reliability (use of an
inferior memory card may result in incomplete data
due to data transfer limitations of other cards).
11. You should replace an old memory card with a new
one periodically (about once per year) for data
reliability. For further information please see Page 6.
12. At all times back-up important data on another
suitable storage medium, such as, (HDD, CD, USB).
2
27
Page 5
Notes
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
…………………………………………………………………
26
8. Notes
1. NOTICES - Important Notes for use of Product
3
13. To avoid possible damage to the device ensure that
the temperature in the vehicle is within operational
limits at all times.
14. At all times (when not in use) keep the memory card
in its protective case to protect the card.
15. The product stores location, time, and speed
information, periodically using the built-in GPS
sensor (GPS-sensor operation is determined by
driving conditions and location).
16. The blue GPS LED illuminates when GPS information
is being received.
17. In the unlikely event of the unit overheating, stop
using the device and remove power from it
immediately. Then contact BLACKBOX support team.
18. Never attempt to change the position of the device
while driving, this can be dangerous.
19. In normal mode voice record default setting is off.
20. You can stop the video recording manually.
However, please note that the device will resume
automatic recording when it is next used.
21. Please note that the system is to be used as a
method for enhancing vehicle and road safety. At
all times drive in accordance with Road
Traffic Regulations.
22. The purchaser is responsible for all content of data
recorded by the device (including consequences
resulting from copying and/or distribution of any
data, whether recorded intentionally or not).
Page 6
1. We can only offer guarantees for products purchased
from BLACKBOX Technologies and are not held
responsible for use of any other products.
2. Please check the correct orientation of the memory
card when inserting into the device as memory cards
and slots can be damaged when the card is inserted
incorrectly.
3. You should only insert and remove memory cards
when all the product’s LEDs have exhausted.
4. Only use the product as a supplementary video storage
device for a car. It is not intended for any other use and
we are not responsible for its use other than this.
5. You should use ‘Copy’ function to transfer data from
the SD card. Do not use ‘Cut’ or you will need to format
the SD card before further use.
6. This product will initialize the memory card if an
unformatted card is inserted. The formatting time
for memory cards is approximately 10 mins.
7. If you use the same memory card repeatedly for a long
time, the card may become unreliable and produce
errors. This is a property of any flash card. To protect
against card errors and maximize reliability please
replace the card every 12 months. Please note that we
are not responsible for data loss due to the age of a
card.
8. On no account change any file names on the card.
9. Do NOT use the memory card in any other device
(NAVIGATIONAL, DIGITAL CAMERA, MP3, PMP, etc..)
1. NOTICES - Important Notes for use of Memory Card
4
Q. The Memory Card is broken what can I do?
A. We recommend contacting your BLACKBOX Technologies
for a replacement card.
Q. The device was damaged in an accident, is it possible to have
it repaired?
A. If the device is involved in a severe accident and the unit is
heavily damaged the unit may be un-repairable and data could
be lost. Please contact us about repair.
Q. When the Memory Card is full, is the old data erased?
A. The device overwrites the oldest files enabling newer files to be
recorded. After an incident remove the memory card, to
retrieve and back-up important information quickly.
Q. The captured video is hazy or blurred?
A. Please clean the lens with a soft, dry lens cloth.
Q. How do I increase the length of recording time before the unit
overwrites data?
A. An 8Gb card is supplied with each unit. For longer recording
times larger memory cards are available from us. Please note
when purchasing an after market SD Card that some retail
memory cards may not have the desired read/write speeds to
support the unit.
Q. I am changing the settings through the viewing software but
they are not saving to the SD Card, what should I do?
A. Please update your drivers if you are using an in-built SD
reader on your PC/laptop. Alternatively, you can purchase an
external SD Card reader device from a reputable PC store.
8. Q & A
25
Page 7
Q. Can the device be mounted anywhere?
A. Yes, but, attach the device in a location where the driver’s
‘field of vision’ is not obstructed in any way.
Q. Why does the video replay upside down?
A. Please check the GPS mark is pointed toward the sky
(upwards) in the mounting bracket.
Q. Despite of the power being on and the vehicle ignition on,
the LED doesn’t blink.
A. Check the power connection of the device and that the correct
voltage is present at the connection.
Q. How can I know if the device is operating normally?
A . Start the engine and check the blinking of LEDs, record a test
video for few minutes. Then play the recorded video data
through the viewing programme via PC.
Q. The 12v power cable is too short.
A. The 12v power cable is 15 feet. This is usually sufficient.
However, you can move the position of the device or
purchase a longer cable.
Q. Is it possible to view the output on my Navigation system
screen?
A. Yes, it is possible if your system has an external input, you will
need to purchase the correct cable/connector.
Q. I don’t want to record audio (sound).
A . You can turn off the sound so that the device is set to record
video only.
Q. Can I erase saved video files?
A. Yes, you can erase the files using the playback software on
your PC.
Q. Will the device save recordings when power is lost?
A. The device will record for 5 to 10 seconds after power is lost
and save the current file.
8. Q & A
24
1. We recommend installation of the device with our
nationwide installers. However, should you install the
product yourself ensure that it is located in a
bright and safe place and carefully study the
information laid out throughout this User Manual.
2. Install the device using the fixing pad and cable clips
supplied. Please ensure that adequate consideration
is given to prevent from impeding the drivers’ ‘field
of vision’. For further information please see
Section 5, page 13.
3. Properly clean the surface where the fixing pad is to
be located before mounting the device.
4. Ensure that hands are clean and dry throughout the
entire installation process.
5. At all times use only the power cord supplied (DC12V
~ 24V). Please note that we are not held responsible
for any damage caused by use of other cables or
connectors.
6. Install the Camera facing internally or externally so
that captured images are not hindered by other
objects (interior mirror etc.)
7. Appropriately set direction and angle with viewer
program or use AV cable provided, then connect AV
out to a suitable monitor.
8. When mounting the device in the bracket, slide the
unit in from the rear at a slight angle and then align
with the grooves each side of the device and snap
into position.
1. NOTICES - Installation Notes
5
Page 8
1. Keep the device out of reach of children.
2. Never expose the device to a naked flame.
3. Do not allow water or foreign material to enter the
device at anytime.
4. Do not drop or subject the device to severe shock or
impact.
5. Do not allow the device to come into contact with
any solvents or chemicals.
6. Do not expose device to extreme temperatures.
7. Do not disassemble or attempt repairs or
modifications to the device. This instantly invalidates
the warranty for the product. Please contact us
immediately should you have a fault or problem with
the product.
1. NOTICES - Notice for Safekeeping
6
Formatting in Viewing Software
Please use the following steps to format memory card in
bbplayer:
1. Click on the Setting Button
2. Select Memory Card Driver
3. Click Start Button
4. Click Yes
5. Finish
7. VIEWING SOFTWARE - Formatting the Memory Card
NB:
The initializing function of memory card includes
both formatting of the memory card and generating
the initial files.
At all times please back-up important files.
Always initialize the memory card after a firmware
update.
The blue LED blinks during initializing. The blue LED
stops and the red LED blinks after completing an
update. The red LED blinks when recording is
functioning normally.
23
Page 9
1. Memory Card Driver
2. Memory Card
Information
3. Time Zone Setting
4. Viewer program
5. Recording option
version
6. Speaker volume
7. G Shock Sensitivity
8. Internal software
language
7. VIEWING SOFTWARE - Changing the Settings
The Settings feature in the viewing software enables the
user to customize the options to suit their needs. This
includes being able to change the driver name, time and
zone settings, sensitivity of the G Shock Sensor, along with
VIEWING SOFTWARE - Formatting the Memory Card
There are several ways to format the Memory Card:
Formatting in Windows
Remove the memory card from the device -> Insert the
memory card into the card reader -> Run format in PC
(recommend FAT32) -> Remove the memory card from the
card reader -> Insert the memory card into the device after
power-on -> Check that blue LED flashes-> It needs about 5
minutes (depending on memory card size etc) -> Check Red
LED now flashes -> Format Complete
1
2
3
4
5
6
7
8
22
The following components come as standard with the
device;
2. COMPONENTS
1. Main Body
2. Mounting Bracket
3. Micro SD Card
4. User Manual
5. Cable Clips
6. Cigarette Jack Cable
7. AV Adapter
8. Micro SD Adapter
9. BLACKBOX Viewer
Software
7
Page 10
3. FULL TECHNICAL SPECIFICATION
Item Specification
Size/Weight
1” × 1” × 2”/Main Body 1oz.,
Mounting Bracket .84oz
Camera
Channel 1 Channel
Sight Angle 83.9º(V)×103.1º(H)×120º
Pixel 130,000Pixels
Sensor
1.4〃CMOS
Image
Recording
Continuous Recording and Shock/
Emergency Function
Compression MPEG4
Resolution 640 x 480(VGA)
Speed 30fps
Data Storage
micro SD (8GB supplied ), micro SDHC
Card (4GB~16GB)
Cradle Right and Left : 360º, Up/ Down 180º
Audio/Video
Internal Mic (ON/OFF), Internal
Speaker, TV output
G-Sensor
Tri-axial Digital Acceleration Sensor (3
axis impact )
Module
GPS Google Map (G9300 only)
RTC Real time Clock (R500 only)
LED Display
Green -> Voice Recording , Red ->
REC , Blue -> GPS
Power
DC 12 ~ 24V
Viewing Software
Searching, Printing, Security &
Management functions
NB: The specification of this device may be changed for
better performance without prior notice.
8
Once clicked, select ‘My Documents’
> ‘BLACKBOX’, > ‘GPS’ and click ‘OK’
a message will appear confirming
this. The file can now be opened via
Google Earth.
7. VIEWING SOFTWARE - Using GPS Function and Map Location
The accurate GPS Module not only highlights the exact
location whilst footage is being taken but also maps the
journey of the vehicle from departure to arrival.
While a video is playing in the
viewer, clicking the Google KML
button enables the user to create
a KML file. This can be viewed
using Google Earth.
Go to ‘My Documents’ >
‘BLACKBOX’, > ‘GPS’ and
double click the created file
to open the journey. Google
Earth shows the journey with
a time based slider that
corresponds with progress
along the recorded trip.
21
Page 11
Playing files in the viewing software couldn’t be easier.
7. VIEWING SOFTWARE - Playing Files
First, click the button as highlighted. Then, select the
relevant folder. Next, simply click OK. The viewing software
then highlights all of the available files stored in the chosen
folder (please see below).
Now simply double click on the relevant file to open it. For
your convenience and to enhance the validity of created
images, files are date and time stamped from satellite.
1
2
3
4
20
Microphone
Audio
Recording
Memory Card
Door
Close door
View 1
View 2
4. PARTS and FUNCTIONS
Camera Lens
To face internally
or externally
Power
Connector
To supply power
connect cable
AV-OUT
TV OUT
Terminal
Speaker
Sound Effects
GPS-Sensor/RTC
Module
Measuring current
location, time and
speed with internal
GPS sensor
9
Page 12
4. PARTS and FUNCTIONS - User Interface
TV Out (Esc)
Set AV Out On/Off
SET(MODE)
Main Menu
Button (card
format etc.)
Can be viewed
using AV-OUT
terminal
MIC (Down Button)
When recording
image,
sound record mode is
ON/OFF with this
button.
GPS/RTC
When this LED (blue)
is ON, the GPS signal
is being received/
RTC is activated
REC
When Red LED is
blinking record mode is
SET.
MIC
When this LED (green)
is ON, Sound record
mode is ON.
NB: To ensure that all functions respond accordingly, press
and hold buttons for approximately 2 seconds.
Event Button
The button saves current
images into event files
10
7. VIEWING SOFTWARE - Structure of the Window
Program Functions
1. Video Screen Window
2. Setting Toolbar
3. Browser Function
4. File List
5. ‘G’ Shock Sensor
6. Play Controller
7. Vehicle Speed
8. File Information
9. Export Buttons
10. Volume Control function
11. Google Maps/Route display
Minimum PC requirements
CPU: Pentium 1 GHZ or higher
OS: Win98, ME, XP, Vista,
Windows 7
Memory: 512 MB RAM or higher
HDD: 500MB or higher
The user-friendly software enables you to view and extract
data easily and securely. All recorded files are date and
time stamped and event files are created that allow you to
locate captured images with ease.
19
Page 13
Button Function
Volume UP
Volume DOWN
EXIT
Enter/Top Menu Select
Adjust Speaker Volume
Recording Opt
6. USING TV OUT FUNCTION - Setting Audio and Memory Card
Please see the information below regarding Firmware
updates and initialization of memory the card.
Button Function
Select UP
Select DOWN
EXIT/Top Menu
Move
Enter/Top Menu Select
Memory card initialization
Sensitivity setting
Please Note:
Memory card initialization formats/creates recording files.
Back-up all files you want to retain.
Firmware update function not available without valid
upgrade file present.
After a Firmware Update, you will have to initialize the
memory card (use the function on this screen).
The diagram below demonstrates how to adjust the
speaker volume and microphone level for recordings.
18
5. INSTALLATION PROCEDURE - The Memory Card
1.Insert the memory
card into the lot and
close the door.
Please note that if the
door is not closed
completely, the memory
card will not work.
To eject the memory card simply
open the door and push the
memory card in. When the door
is opened a short audio tone
sounds to notify that it has been
opened.
2. Mount the main body in the
bracket with the GPS/RTC
mark facing upwards. Please
note that if the GPS mark is
facing down then the video
will be upside down and no
GPS will be received.
11
Page 14
5. INSTALLATION PROCEDURE - Choosing a Location
The best location depends on
the intended use. For Taxi
Drivers it is recommended that
the device is mounted by the
rear view mirror. For other
applications (motorsports,
private & domestic use etc.) the
dash may be more appropriate.
Rear View
Mirror
Mount
Dashboard
Mount
The Cube can be mounted anywhere secure in the vehicle.
Typical installations are on the dashboard or above rear
view mirror.
12
Please see the diagrams below to understand the various
button functions when replaying a video using an external
AV player.
6. USING TV OUT FUNCTION - Setting Mode (video playback)
Selecting a Video File
Button Function
Select Up
Select Down
EXIT
PLAY/Top Menu
Select
File Number / Total files
Example: first file of the 45 files
Playing a Video File
17
Button Function
REV
FF
EXIT
PLAY/PAUSE
Page 15
6. USING TV OUT FUNCTION - Setting Mode (main menu)
File replay: displays a list of stored files.
Audio: adjusts speaker volume and voice
recording level.
Memory Card: controls memory card
initialization and sensitivity setting.
Information: displays information for the
product (model name, Software Version,
Homepage, standard time etc).
GPS signal status: user can check door Open
Close of the Memory Card and GPS signal
status.
Date Setting: set the date
Time Setting: set the date
Key Functions
The Key Functions,
while in Setting Mode
are displayed below.
16
5. INSTALLATION PROCEDURE - Configuration
After adjusting the angle of the
camera, tighten the clamp and lock
into position. The main body of the
device should now be firmly in
place with the mounting bracket
tightly secured. Please test this by
gently attempting to swivel the
bracket and device.
After the power cable is connected
to the main body, carefully bind the
extension wire with the clips supplied.
Next, start the vehicle’s ignition and
wait for the unit to power-up. This is
signified by the LEDs flashing from
one to the next and is followed by an
audio tone that highlights the device
is now ready for use.
It is now important to test the
device to become familiar with its
functioning.
The power cable should
then be inserted to
power-up the device. This
is illustrated in the picture
on the right.
13
Page 16
6. USING TV OUT FUNCTION
Then connect an AV
cable and the device is
now ready for use.
Please note that AV
cables are not supplied
as standard.
This due to the fact that
many connection
combinations exist,
which are dependent on
the type of external
device being used.
If you wish to use this
function then please
purchase a suitable
cable.
14
The product has the capability to
be linked up to an external AV
device, such as, a TV monitor
or screen.
To do this firstly connect the
device to the 2.5 mono AV
Adapter. This comes supplied as
standard with the device.
6. USING TV OUT FUNCTION
Output of current image
Operation
To initiate Image Output: push the ESC button for 2
or 3 seconds-> then check the image output.
To stop Image Output: push the ESC button.
Operation
Setting mode output: push the mode button for 2
or 3 seconds -> then push ‘ mode’ to stop recording.
Exit Setting mode output: push the ESC button to
exit.
15
Loading...