Black Box MDS932AE-10BT, MDS933AE-10BT, MDS933C-10BT, MDS932AE-FXS, MDS932AE-FXO User Manual

...
User Manual
MDS932AE-10BT STANDALONE
MDS932AE-FXO STANDALONE
MDS932AE-FXS STANDALONE
MDS933AE-10BT STANDALONE
MDS932C-10BT RACK-CARD
MDS933C-10BT RACK-CARD
G.SHDSL Modem
USER MANUAL
Revision 26 January 2004
Document name MDS933AE-v1.2.doc
User Manual
VERSION CONTROL .......................................................................................................... 5
1 GENERAL INFORMATION........................................................................................ 6
ORDER INFORMATION ..................................................................................................... 7
2 DESCRIPTION OF THE DEVICE .............................................................................. 8
2.1 Exterior design Desktop models .......................................................................8
2.2 Exterior design Rack Cards models................................................................ 10
3 RULES OF SWITCHING.......................................................................................... 12
3.1 The Desktop delivery set................................................................................. 12
3.2 The Rack Card delivery set............................................................................. 12
3.3 Connection rules ............................................................................................. 12
3.4 Communication parameters of the terminal configuration............................... 12
4 THE COMMAND SYSTEM ...................................................................................... 14
4.1 Basic rules....................................................................................................... 14
4.2 The main menu ............................................................................................... 14
4.3 Performance management submenu.............................................................. 15
4.3.1 Loop Status submenu .......................................................................15
4.3.2 Ethernet Status submenu..................................................................16
4.4 Configuration management submenu ............................................................. 16
4.4.1 DSL Setup ......................................................................................... 17
4.4.2 Ethernet Setup submenu................................................................... 19
4.4.3 Profile submenu ................................................................................19
4.5 Security management submenu .....................................................................19
5 TECHNICAL SPECIFICATIONS.............................................................................. 20
6 STORAGE CONDITIONS ........................................................................................ 21
7 TERMS TO TRANSPORT........................................................................................ 22
8 CONNECTOR’S DESCRIPTION ............................................................................. 23
8.1 DSL Connector................................................................................................ 23
8.2 Monitor Connector........................................................................................... 23
8.3 PC and Hub Connectors ................................................................................. 24
Version: 1.2 Page. 3 of 25
User Manual
8.4 Line1 and Line2 Connector ............................................................................. 24
9 DESCRIPTION OF INTERFACE CABLES.............................................................. 25
9.1 Ethernet cable ................................................................................................. 25
9.2 DSL cable........................................................................................................ 25
Version: 1.2 Page. 4 of 25
User Manual

VERSION CONTROL

Version Date Major changes to previous version
1.0 31.12.2001 Initial version of the manual corresponding to version 1.2 of the device micro program
1.1 23.10.2003 New function description corresponding to software release V1.6
Corrected Connecter description 9.1
Changed DSL cable to twisted type 10.2
1.2 26.1.2004 Manual corresponding to software version 1.7
Implementation of rack card models
Version: 1.2 Page. 5 of 25
User Manual
1 GENERAL INFORMATION
High-speed symmetrical data transmission over one physical copper twisted pair with the 135 Ohm impedance according to ETSI TS 101 135.
ITU-T G.991.2 (G.shdsl) line encoding.
Line rate in the range from 72 Kbit/s to 2320 Kbit/s in 2 wire mode
Line rate in the range from 144 Kbit/s to 4624 Kbit/s in 4 wire mode
Manual or automatic mode of line-speed adjustment.
Ethernet 10/100Base-T interface, Full/Half duplex.
Transmition of VLAN packet (IEEE-802.1Q).
Dynamic table formation of MAC addresses.
Accumulation of up to 1024 MAC addresses.
Granting of 95% of the digital channel band to the user.
In-built functions of diagnostics and self-testing.
Low power consumption, easy-to-use applications.
Console port for the local management.
Telnet port for the local / remote management
220 Vac power
For MDS932AE-FXO/FXS
up to 2 voice cannel.
Version: 1.2 Page. 6 of 25
User Manual

ORDER INFORMATION

MDS932AE-10BT
MDS933AE-10BT
MDS932AE-FXS
MDS932AE-FXO
Modem AccessDSL Discovery, G.shdsl, 10/100Base-T Bridge, VLAN, Adapter 220 Vac
Modem AccessDSL Discovery, G.shdsl, 1 or 2 pairs, up to
4.6Mbps, 10/100Base-T Bridge, VLAN, Adapter 220 Vac
Modem AccessDSL Discovery, G.shdsl, 10/100Base-T Bridge, VLAN, Adapter 220 Vac, with FXS interfaces
Modem AccessDSL Discovery, G.shdsl, 10/100Base-T Bridge, VLAN, Adapter 220 Vac, with FXO interfaces
Version: 1.2 Page. 7 of 25
User Manual

2 DESCRIPTION OF THE DEVICE

2.1 Exterior design Desktop models
The front panel of the device has 3 LEDs:
LOCAL informs the user about the status of the local device. The following four statuses are
possible
«blinking red» informs the user about malfunctioning of the modem’s hardware
and software. In this case, the modem is out of order and should be submitted to the service center for being repaired.
«red» informs the user about an urgent alarm. An abruption of the
connection, the correspondence of the signal-to-noise ratio which does not allow to transmit information and a great number of errored blocks can cause an urgent alarm. See the “Command menu” chapter for detail.
«amber» informs the user about non-urgent alarms. An abruption of
connection over the user’s interface can cause non-urgent alarms.
«green» absence of alarms. Normal functioning of the device.
REMOTE informs the user about the status of the remote device. At the time being the remote
configuring of modems is not provided.
LINK/ACT The LED is lit upon an incorrect connection to the LAN. The LED is blink upon the
detection of packets in the segment of the current LAN.
Version: 1.2 Page. 8 of 25
Loading...
+ 17 hidden pages