Page 1
Documentation Model Number LWS405A-906qs PN7004-rev001
Documentation Model Number LWS405A-906qs PN7004-rev001
Black Box Corporation - 1000 Park Drive - Lawrence, PA 15055-1018
Tech Support and Ordering: 724-746-5500 - Fax: 724-746-0746
To contact us about Black Box products or services: info@blackbox.com
1
2
4
5
6
7
8
3
n LWS405A
Wireless 802.11b Serial Serve
r
Quick Start Guide
CCoonnffiigguurree WWeebb AAcccceessss
SSeettu
u
p
p
tthheeHHaarrddwwaarre
e
Connect your PC to the wireless network
Connect the antenna to the LWS405A
Connect 10 VDC to 30 VDC to the power supply
terminals of the LWS405A
Connect the LWS405A serial port to the serial port
of your serial device. (Use a null cable if the serial
device is a DTE.)
CCoonnffiigguurree tthhee LLWWSS440055AA
GGeett tthhee IIPP AAddddrreesss
s
Infrastr ucture Mode
Configure your network using an access point with the SSID Connect and all encryption disabled (such as WEP & WPA).
Wireless Card Ad-Hoc Mode
Configure the wireless card to operate in Ad-Hoc mode with
the SSID - Connect.
Use the discovery software on your CD (finder.exe)
to get the IP address for your LWS405A
If necessary, change the IP address using the
discovery software
SSeett u
upp VVCCOOMM
For Win 2K/XP, start the RealPort software wizard
(located on the included CD via setup.exe)
Select your LWS405A from the list
Select an unused COM port number
Follow the wizard to set up a virtual COM port
For Win 98, ME, NT 4.0, follow the readme.txt
included with each O/S (no setup.exe available)
O
Oppeerraattiioonn
Configure and then start your application
In the Configuration, Network page configure
your Wireless LAN, Security and other settings
to work on the type of wireless network you
will be connecting to.
In the Configuration, Serial Ports page select
the Port Profile you require for use with your
application (E.g. RealPort for virtual COM port,
TCP Server, UDP server, Serial Bridge, etc)
Configure the serial port settings for the
selected Port Profile (E.g. In TCP Sockets
select client or server, TCP port numbers, etc.)
Also configure baud rate, data bits, etc in
Basic Serial Settings.
Configure any required alarms and notification
If RealPort profile was selected (virtual COM
p
ort) do the next step (Set up VCOM
)
A
pply power to the LWS405
A
The Link LED (yellow) will blink while looking for the
wireless network. When a connection is established with
the network the Link LED will illuminate steadily. The
LWS405A will connect to the SSID Connect. If it cannot
find an SSID of connect it will connect to the first
unsecured network it finds.
The LWS405A will automatically try to obtain an IP
address though DHCP, or generate one itself
PPoowweerr iitt uupp
In a web browser on your PC, type in the
IP address and access the Web
Configuration and Management Interface
Login using the username ‘root’ and
password ‘dbps’
LLooggiinn
Model: LWS405A
Loading...