Page 1
877-877-2269 | blackbox.com877-877-2269 | blackbox.com 877-877-2269 | blackbox.com
Page 5 Page 6
© Copyright 2016. Black Box Corporation. A ll rights reser ved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, I nc. Any other trademarks mentioned in this manual
are acknowledged to be the proper ty of the trademark owners.
Quick Start Guide
LPH1000 Series Industrial Ethernet PoE Switch
LPH1006A
Order toll-free in the U.S.:
Call 877- 877- BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 877-877-2269
Web site: www.blackbox.com
E-mail: info@blackbox.com
Customer
Support
Information
LPH1006A Quick Start Guide
lp h10 06a _qs g _r ev2
Table 2-1. Switch components.
Number in
Figure 2-1
Component Description
1 (2) Power
LEDs
Light when unit is
powered on.
2 (2) SFP Speed
DIP Switches
Selects 100M/1G.
3 (2) SFP Link/
Act LEDs
Light when SFP Link is
active.
4 (2) SFP slots SFP module (LFP401–
LFP404, LFP411–
LFP414, LFP416) installs
here
5 (4) Gigabit
RJ-45 PoE
ports
Link to 10 /10 0 /100 0Mbps PoE Ethernet
devices or segments
6 (1) Power
Fault LED
Lights when power is
on.
7 (4) RJ-45
port LINK /
ACT LEDs
ON when port is connected;
OFF when port is not
connected;
Flashing when data is
transmitted or received
8 (4) RJ-45
port PoE
LEDs
ON when port is using
PoE;
OFF when port is not
using PoE
NOTE: SFP modules are ordered separately.
Table 2-2. Relay output DIP switches (#9 in Figure 2-1).
Code Description
LFP4 01 SFP, 155-Mbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 2 km
LFP402 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Multimode, 2 km, LC
LFP403 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single -Mode, Plus, 30 km, LC
LFP40 4 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single -Mode, Plus, 6 0 km, LC
LFP 411 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 300 m
LF P412 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Multimode, LC, 2 km
LF P413 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single -Mode, LC, 10 km
LF P414 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single -Mode, LC, 30 km
LF P416 SFP with SGMII Interface, 1.25 Gbps, Copper,
10/100/1000BASE-T, Extended Diagnostics
Table 2-3. Compatible SFPs.
DI P-1 DIP-2 Description
OFF OFF Power failure relay alarm disabled.
ON OFF PWR-1 failure, relay alarm enabled
OFF ON PWR-2 failure, relay alarm enabled.
ON ON PWR-1 or PWR-2 failure, relay alarm
enabled.
Page 2
877-877-2269 | blackbox.com877-877-2269 | blackbox.com 877-877-2269 | blackbox.com
LPH1006A Quick Start Guide LPH1006A Quick Start GuideLPH1006A Quick Start Guide
Page 3Page 2 Page 4
1. Specifications
Features
Processing Store-and-Forward
MAC
Addresses
1 K
Mechanical
User Controls (2) DIP switches for SFP speed setting;
(2) DIP switches for Relay output
Indicators Per RJ-45 port: (1) LINK/ACT, (1) PoE;
Per SFP port: (1) LINK/ACT;
Per unit: (2) PWR, (1) Fault LED
Connectors (4 ) R J -45, 10/10 0 /10 00BASE-T(X )
PSE, auto MDI/MDI-X;
(2) 100M/1G SFP slots
Dimensions 5.6"H x 1.6"W x 3.7"D
(14.3 x 4.1 x 9.4 cm)
Weight 1.2 lb. (0.54 kg)
Power
Redundant Dual 24–36 VDC inputs on 6-pin
terminal block
Consumption 7.5 W, with overload current
protection
Relay 1 A at 24 VDC
Environmental
Temperature
Tolerance
Operating: -40 to +158° F
(-40 to +70° C);
Storage: -40 to +185° F
(-40 to +85° C)
Humidity 10 to 95%, noncondensing
Approvals
Regulations EMI, EMS, Shock, Free Fall, Vibration,
Safety
Approvals
Certifications FCC Class B, CE
Standards IEEE 802.3x Flow control;
IEEE 802.3 10BASE-T;
IEEE 802.3u 100BASE-TX/ FX;
IEEE 802.3ab 1000BASE-T;
IEEE 802.3z 1000BASE-X;
IEEE 802.3at POE (up to 30 W per
port for PSE)
2. Overview
2.1 Features
This unmanaged PoE switch provides (4)10/100/1000
Mbps ports plus (2) 100M/1G SFP open slots. It was
designed for easy installation and high performance in
an environment where traffic is on the network and the
number of users increases continuously.
2.2 Features
• Provides (4) 10/100/1000Mbps PoE (PSE) ports
plus (2) 100M/1G SFP slots.
• Supports PSE based on IEEE 802.3t standard
up to 30 W per port.
• Includes dual 24 VDC power inputs.
• SFPs support 100BASE-TX and 1000BASE-X speeds.
• Auto-negotiates speed and polarity.
• Supports store-and-forward transmission.
• Mounts on a DIN rail or wall.
2.3 What’s Included
Your package should include the following items.
If anything is missing or damaged, contact Black Box
Technical Support at 877-877-2269 or
info@blackbox.com.
• (1) Gigabit Ethernet Switch
• This Quick Installation Guide
2.4 Hardware Description
Power Connection Guide
1000BASE-T Ethernet Connection
10/100BASE-T(X) Ethernet Connection
Front and Top Panels
Figures 2-1 shows the front and top panels of the
switch. Table 2-1 describes its components.
Figure 2-1. Front and top panels.
1
2
3
6
4
4
5
7
8
9
Loading...