Page 1
Perfect for small- to medium-sized workgroups,
this switch provides eight 10/100-Mbps ports.
Port 8 is a Power over Ethernet (PoE) powered device port.
8-Port 10/100 Switch with (1) PoE PD Port
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
LPE108AE
Page 2
Page 2
724-746-5500 | blackbox.com
8-Port 10/100 Switch with (1) PoE PD Port
FEDERAL COMMUNICATIONS COMMISSION AND
INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio-frequency energy,
and if not installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, may cause inter ference to radio communication.
It has been tested and found to comply with the limits for a Class A computing
device in accordance with the specifications in Subpart J of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference
when the equipment is operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference, in which case
the user at his own expense will be required to take whatever measures may be
necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise
emis sion from digital apparatus set out in the Radio Interference Regulation
of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de la classe A prescrites dans le
Règlement sur le brouillage radioélectrique publié par Industrie Canada.
EUROPEAN COMMUNITY (CE)
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE
This equipment has been tested and found to comply with the protection
requirements of European Emission Standard EN55022/EN61000-3 and the
Generic European Immunity Standard EN55024.
EMC:
EN55022 (2003)/CISPR0-2 (2002): Class A
IEC61000-4-2 (2001): 4 KV CD, 8 K AD
IEC61000-4-3 (2002): 3 V/m
IEC61000-4-4 (2001): 1 kV (power line), 0.5 kV (signal line)
Page 3
Page 3
724-746-5500 | blackbox.com
NOM Statement
Normas Oficiales Mexicanas (NOM)
Electrical Safety Statement
INSTRUCCIONES DE SEGURIDAD
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el
aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para
referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de
operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,
cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean
recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea
recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá
lo descrito en las instrucciones de operación. Todo otro servicio deberá ser
referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no
interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,
alfombra o superficie similar puede bloquea la ventilación, no se debe
colocar en libreros o gabinetes que impidan el flujo de aire por los orificios
de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor
como radiadores, registros de calor, estufas u otros aparatos (incluyendo
amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del
tipo descrito en el instructivo de operación, o como se indique en el
aparato.
Page 4
Page 4
724-746-5500 | blackbox.com
8-Port 10/100 Switch with (1) PoE PD Port
12. Precaución debe ser tomada de tal manera que la tierra fisica y la
polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no
sean pisados ni pellizcados por objetos colocados sobre o contra ellos,
poniendo particular atención a los contactos y receptáculos donde salen
del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las
recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las
lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea
usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean
derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
Page 5
Page 5
724-746-5500 | blackbox.com
Trademarks Used in this Manual
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be
the property of the trademark owners.
Page 6
Page 6
724-746-5500 | blackbox.com
8-Port 10/100 Switch with (1) PoE PD Port
1. Specifications
Buffer Memory: Embedded 1-Mbps frame buffer
Certifications: FCC Class A, CE
Flow Control: IEEE 802.3x compliant for full duplex; backpressure flow control
for half duplex
Full Forwarding/Filtering Rate (pps):
148,800 pps at 100 Mbps, 14,880 pps at 10 Mbps
MAC Address: 2 K
Standards: IEEE 802.3af, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX,
IEEE 802.3x flow control
Transmission Media: 10BASE-T CAT3, 4, 5 UTP/STP; 100BASE-TX CAT5
UTP/STP
Transmission Mode: 10-/100-Mbps support, full- or half-duplex
Transmission Speed: 10-/100 Mbps for twisted pair
Switching Method: Store and forward
Connectors: (8) RJ-45 10/100BASE-TX with (1) PD/PoE port, (1) barrel connector
for power
LED Indicators: Per port: LINK/ACT;
Per unit: Power
Temperature Tolerance: Operating: +32 to +131° F (0 to +55° C);
Storage: -4 to +194° F (-20 to +90° C)
Relative Humidity: 10 to 90% (noncondensing)
Power: Input: 5 VDC, 2 A;
Power consumption: 6 watts (maximum)
Size: 0.9"H x 3"W x 5.4"D (2.4 x 7.7 x 13.6 cm)
Weight: 0.77 lb. (0.35 kg)
Page 7
Page 7
724-746-5500 | blackbox.com
Chapter 2: Overview
2. Overview
2.1 Introduction
This high-performance switch provides eight 10-/100-Mbps ports. Port 8 is a
power device (PD) port that receives power from other power source equipment
(PSE) ports via CAT5 cables.
The switch is easy to install in an environment where network traffic and the
number of users increases continually, and you need to keep adding workgroups.
The compact device was designed specifically for small to medium workgroups.
Install it where space is limited.
2.2 What’s Included
Your package should include the following items. If anything is missing
or damaged, contact Black Box Technical Support at 724-746-5500
or info@blackbox.com.
• (1) 8-Port 10/100 Switch with (1) PoE PD Port
• (1) power adapter
• This user’s manual
2.3 Hardware Description
2.3.1 Front Panel
Figure 2-1 shows the unit’s front panel. Table 2-1 describes its components.
1
3
2
Figure 2-1. Front panel.
Table 2-1. Front-panel components.
Number Component Description
1 Power LED Lights when power to the unit is on
2, 3 (8) LINK/ACT LEDs Each LED lights when there is activity
on the corresponding connected port.
LED 8 is also for the PD/PoE port
connection.
Page 8
Page 8
724-746-5500 | blackbox.com
8-Port 10/100 Switch with (1) PoE PD Port
2.3.2 Back Panel
Figure 2-2 shows the unit’s back panel. Table 2-2 describes its components.
4
3
Figure 2-2. Back panel.
Table 2-2. Back panel components.
Number Component Description
3 (7) RJ-45 ports Link to RJ-45 devices
4 (1) RJ-45 port PoE PD port
2.4 LED Indicators Descriptions
Table 2-3. LED indicators.
LED Status Description
Power On Power is on
Off Power is off
LINK/ACT On Port is connected
Off Port is not connected
Flashing Data is being transmitted or received
Page 9
Page 9
724-746-5500 | blackbox.com
Chapter 3: Installation
3. Installation
Twisted-pair port and cable installation:
1. The twisted-pair port on the switch supports Auto MDI/MDI-X crossover, so
you can use either straight-through or cross-pinned cable. Just plug-and-play.
2. Connect one end of a CAT5 or above twisted-pair cable to an RJ-45 port on
the switch. Connect the other end of the cable to a workstation or server.
3. Repeat Steps 1 and 2 above for each device that you want to connect to the
switch.
For successful installation and optimum performance, make sure you use CAT5
or higher-grade cable. If you use lesser-grade cables, the network will perform
poorly. For a 100-Mbps Fast Ethernet connection, use CAT5 or CAT5e cable
that’s up to 328 feet (100 meters) long.
Power on:
Power the switch via a PoE PSE (Power Source Equipment) device or from an
external DC power adapter. Make sure your PoE PSE device complies with 802.3af
and uses 48 VDC.
When you power on the device, all LED indicators will light immediately, then go
off. However, the power LED remains on.
Power input
Figure 3-1. Power input on the switch.
NOTE: When powering the device from PoE PSE, make sure it supplies at least
48 VDC, 125 mA.
Page 10
Page 10
724-746-5500 | blackbox.com
NOTES
Page 11
Page 11
724-746-5500 | blackbox.com
NOTES
Page 12
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 20 seconds away at
724-746-5500 or blackbox.com.
724-746-5500 | blackbox.com
About Black Box
Black Box Network Services is your source for more than 118,000 networking
and infrastructure products. You’ll find everything from cabinets and racks and
power and surge protection products to media converters and Ethernet switches
all supported by free, live 24/7 Tech support available in 20 seconds or less.
©
Copyright 2010. All rights reserved.
LPE108AE, rev. 1
Loading...