©Copyright2007.BlackBoxCorporation.Allrightsreserved 55‐80632BB‐00A7
1000ParkDrive • Lawrence,PA15055‐1018 • 877‐877‐2269 • Fax724‐746‐0746
CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S.: 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
FEBRUARY 2007
LHC013A LHC014A
LHC015A LHC028A
LHC029A LHC030A
LHC031A LHC036A
LHC040A LHC041A
LHC042A LHC043A
Miniature Media Converter
10/100 Switching
ii
FCC and Industry Canada RF Interference Statements
Class B Digital Device. This equipment has been tested and found to comply with
the limits for a Class B computing device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. This equipment generates,
uses, and can radiate radio frequency energy, and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
telephone reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the p arty responsible for compliance could
void the user’s authority to operate the equipm ent.
To meet FCC requirements, shielded cables and power cords are required to
connect this device to a personal computer or other Class B certified device.
This digital apparatus does not exceed the Class B limits for radio noise emission
from digital apparatus set out in the Radio Interference Regulation of Industry
Canada.
5
Notes
4
Notes
iii
Normas Oficiales Mexicanas (NOM) Electrical Safety Statement
Instrucciones de Seguridad
1.
Todas las instrucciones de seguridad y operación deberán ser leídas antes de
que el aparato eléctrico sea operado.
2.
Las instrucciones de seguridad y operación deberán ser guardadas para
referencia futura.
3.
Todas las advertencias en el aparato eléctrico y en sus instrucciones de
operación deben ser respetadas.
4.
Todas las instrucciones de operación y uso deben ser seguidas.
5.
El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de
la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc..
6.
El aparato eléctrico debe ser usado únicamente con carritos o pedestales que
sean recomendados por el fabricante.
7.
El aparato eléctrico debe ser montado a la pared o al techo sólo como sea
recomendado por el fabricante
8.
Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá
a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser
referido a personal de servicio calificado.
9.
El aparato eléctrico debe ser situado de tal manera que su posición no
interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,
alfombra o superficie similar puede bloquear la ventilación. No se debe colocar
en libreros o gabinetes que impidan el flujo de aire por los orificios de
ventilación.
10.
El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor
como radiadores, registros de calor, estufas u otros aparatos (incluyendo
amplificadores) que producen calor.
11.
El aparato eléctrico deberá ser conectado a una fuente de poder sólo del tipo
descrito en el instructivo de operación, o como se indique en el aparato.
12.
Precaución debe ser tomada de tal manera que la tierra física y la polarización
del equipo no sea eliminada.
13.
Los cables de la fuente de poder deben ser guiados de tal manera que no sean
pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo
particular atención a los contactos y receptáculos donde salen del aparato.
14.
El equipo eléctrico debe ser limpiado únicamente de acuerdo a las
recomendaciones del fabricante.
iv
15. En caso de existir, una antena externa deberá ser localizada lejos de las líneas
de energía.
16.
El cable de corriente deberá ser desconectado cuando el equipo no sea usado
por un largo período de tiempo.
17.
Cuidado debe ser tomado de tal manera que objecos líquidos no sean
derramados sobre la cubierta u orificios de ventilación.
18.
Servicio por personal calificado deberá ser provisto cuando:
a.
El cable de poder o el contacto ha sido dañado; u
b.
Objectos han caído o líquido ha sido derramado dentro del aparato; o
c.
El aparato ha sido expuesto a la lluvia; o
d.
El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
e.
El aparato ha sido tirado o su cubierta ha sido dañada.
3
Black Box Customer Service
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 724-746-5500)
Free technical support
, 24 hours a day, 7 days a week.
Call:
724-746-5500 or
Fax:
724-746-0746
Mail order:
Black Box Corporation
1000 Park Drive, Lawrence, PA 15055-1018
Web site:
www.blackbox.com
E-mail:
info@blackbox.com
Safety Certifications
UL/CUL: Listed to Safety of Information Technology Equipment, including
Electrical Business Equipment.
European Directive 2002/96/EC (WEEE) requires that any equipment that bears
this symbol on product or packaging must not be disposed of with unsorted
municipal waste. This symbol indicates that the equipment should be disposed of
separately from regular household waste. It is the consumer’s responsibility to
dispose of this and all equipment so marked through designated collection facilities
appointed by government or local authorities. Following these steps through
proper disposal and recycling will help prevent potential negative consequences to
the environment and human health. For more detailed information about proper
disposal, please contact local authorities, waste disposal services, or the point of
purchase for this equipment.
Class 1 Laser product, Luokan 1 Laserlaite,
Laser Klasse 1, Appareil A’Laser de Classe 1
2
LED Operation
Each Miniature Media Converter 10/100 Switching includes two LEDs, located on
the RJ45 connector:
• FX LNK/ACT
: Glows green when a link is established on the fiber port; blinks
green when activity is detected on the fiber port.
• TX LNK/ACT
: Glows amber when a link is established on the copper port;
blinks amber when activity is detected on the copper port.
Specifications
Power
AC Input: 100/240 VAC ±10%, 50/60 Hz
DC Output: 0.25 A @ 5VDC (1 A maximum)
Power Consumption: 600 mA @ 5 VDC
Operating Temperature:
32° to 122° F (0° to 50° C)
Storage Temperature:
-13° to 158° F (-25° to 70° C)
Humidity:
5 to 90% (non-condensing); 0 to 10,000 ft. altitude
Shipping weight:
0.75 lbs. (0.34 kg)
Dimensions:
0.83”H x 1.80”W x 3.35”D (2.1 cm x 4.6 cm x 8.5 cm)
+5 V (±5%)
GND
v
Table of Contents
FCC and Industry Canada RF Interference Statements .................................ii
Normas Oficiales Mexicanas (NOM) Electrical Safety Statement.................. iii
Miniature Media Converter 10/100 Switching Part Numbers ...................... vi
About the Miniature Media Converter 10/100 Switching..............................1
LED Operation ............................................................................................2
Specifications .............................................................................................. 2
Black Box Customer Service......................................................................... 3
Safety Certifications ....................................................................................3
vi
Miniature Media Converter 10/100 Switching Part Numbers
The part numbers include the following:
Part Number Port 1 Port 2 Speed Media 1 Media 2 Dist.
LHC040A RJ45 ST 10/100 Mbps Ethernet
MM-850 300 m
LHC041A RJ45 SC 10/100 Mbps Ethernet
MM-850 300 m
LHC013A RJ45 ST 10/100 Mbps Ethernet
MM-1300 2 km
LHC014A RJ45 SC 10/100 Mbps Ethernet
MM-1300 2 km
LHC036A RJ45 ST 10/100 Mbps Ethernet
SM-1310 40 km
LHC015A RJ45 SC 10/100 Mbps Ethernet
SM-1310 40 km
LHC042A RJ45 SC 10/100 Mbps Ethernet
SS-MM-1310 2 km
LHC043A RJ45 SC 10/100 Mbps Ethernet
SS-MM-1550 2 km
LHC028A RJ45 SC 10/100 Mbps Ethernet
SS-SM-1310 20 km
LHC029A RJ45 SC 10/100 Mbps Ethernet
SS-SM-1550 20 km
LHC030A RJ45 SC 10/100 Mbps Ethernet
SS-SM-1310 40 km
LHC031A RJ45 SC 10/100 Mbps Ethernet
SS-SM-1550 40 km
NOTE: Single Strand (SS) versions display the transmit channel wavelength.
1
About the Miniature Media Converter 10/100 Switching
The Miniature Media Converter 10/100 Switching offers plug-and-play operation,
including the AutoCross feature that automatically selects between a crossover
work-station or straight-through repeater hub connection depending on the
connected device.
The Miniature Media Converter 10/100 Switching installs in a PowerTray, 18-slot
and can also function as a standalone converter. As a standalone, the Miniature
Media Converter 10/100 Switching uses either a universal, external power adapter
or USB input.
The fiber port always operates at 100 Mbps Full-Duplex; the copper port autonegotiates the connected device’s speed and duplex mode (including Flow
Control):
• 10 Mbps (Half or Full-Duplex)
• 100 Mbps (Half or Full-Duplex)
Installation Tip
Several models support single-strand fiber for operation. Since single-strand fiber
products use optics that transmit and receive on two different wave-lengths, singlestrand fiber products must be deployed in pairs. For example, connect the
Miniature Media Converter 10/100 Switching, SS-SM1310-SC (which has 1310
transmit and 1550 receive) to a product which has 1550 transmit and 1310 receive.
The two connected products must also have the same speed and distance
capabilities (i.e. both are single-mode [10 km] or both are single/PLUS
[40 km]).
NOTE: Use only the supplied power supply. Using another power source will void the warranty.
Loading...