Black Box LB9032A, LB9030A, LB9031A, LBG1000A-R2, LBG1001C Specifications
1
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: info@blackbox.com
© 2004. All rights reserved.
Black Box Corporation.
2/17/2004 #26138
Fixed-port switch has
seven 10-/100-Mbps
RJ-45 ports plus
one 100BASE-FX
multimode or singlemode fiber port.
Modular switch has
(24) 10-/100-Mbps
RJ-45 ports plus
(2) slots for optional
1000BASE-SX Gigabit
fiber uplink modules.
Spans distances up
to 1.2 miles (1.9 km)
multimode or 9.3 miles
(15 km) single mode.
Includes management
support.
T
ake advantage of the speed
and distance of a 100-Mbps or
1000-Mbps fiber connection. The
Fixed-Port and Modular Managed
Express Ethernet Switches
combine managed switching with
autonegotiating Ethernet and Fast
Ethernet ports and a fiber uplink.
Three fixed-port models are
available. Each has seven 10-/
100-Mbps RJ-45 ports and works
with 100BASE-FX fiberoptic cable.
The LB9030A also accommodates
one 100-Mbps multimode dual SC
port, and the LB9031A features
one 100-Mbps multimode dual ST
port. The LB9032A has one 100Mbps single-mode dual SC port.
Use the RJ-45 ports on the
fixed-port switches for shortdistance networking between
offices, workgroups, and
buildings. Connect via the fiber
port for longer distances. The
LB9030A and LB9031A support
fiber connections up to 1.2 mi.
(1.9 km) over multimode fiber.
Choose these switches for flexible,
affordable, managed dual-speed
Ethernet switching with fiber uplinks.
Key Features
MANAGED EXPRESS ETHERNET SWITCHES
The LB9032A handles distances
up to 9.3 mi. (15 km) over singlemode fiber.
If you need a more flexible
configuration, order the modular
switch (LBG1000A-R2). It has
24 10-/100-Mbps ports and
two slots for Gigabit uplinks. Plus,
it takes up only 1U of rack space.
The power supply is built right into
the unit.
Expand a network quickly with
the modular switch’s 24 RJ-45
ports. To link the switch to your
WAN, install the 1000BASE-SX
Fiber Module (LBG1001C).
Software management is
easy, too. All fixed-port and
modular switches support 2K
MAC addresses for transferring
traffic across the network
efficiently. And they support
SNMP and RMON. Manage the
switches in-band across the
network using any Web browser.
Or manage them out-of-band via
the RS-232 console port.
Using the switches’ 802.3p
Priority Queuing, give different
priorities to different types of
traffic. Traffic management,
network segmentation, and
network security also improve,
thanks to 802.1Q Tagged VLAN
support. The switches support
IP multicast traffic and video
multicasting or broadcasting via
IGMP snooping and Multicast
Filtering. Plus, they handle switchto-switch trunking, port-mirroring,
and monitoring for traffic
snooping.
Wire-speed packet switching
and packet-forwarding are also
supported. 802.3x flow control and
backpressure prevent overflow of
data frames, for better traffic
management when the network is
congested. Front-panel LEDs
allow status checks for each port.
Two internal cooling fans
provide ventilation. You can even
install the switch in a 19" rack
using the included rackmount kit.
2
Distance (Maximum):
RJ-45 ports: 328 ft. (100 m);
100-Mbps multimode fiber port:
1.2 mi. (1.9 km);
100-Mbps single-mode fiber port:
9.3 mi. (15 km);
Gigabit fiber port: 721.8 ft. (220 m)
Forwarding Rate:
10 Mbps: 14,880 pps;
100 Mbps: 148,800 pps;
1000 Mbps: 1,488,000 pps
MAC Addresses:
LB9030A–LB9032A: 1 K;
LBG1000A-R2: 2 K
Standards: IEEE 802.3, IEEE 802.3u,
IEEE802.3z, IEEE 802.3ab,
IEEE 802.1d
Switching Method: Store and
forward
VLAN Support:
LB9030A–LB9032A: Port-based
VLAN and 802.1Q Tagged
VLAN;
LBG1000A-R2: IEEE 802.1Q VLAN
Tagging, up to 8 groups
Connectors:
LB9030A, LB9032A: (7) RJ-45,
(2) SC;
LB9031A: (7) RJ-45, (2) ST
®
;
LBG1000A-R2: (24) RJ-45;
LBG1001C: (2) SC
Indicators: LB9030A–LB9032A: Per
Unit LEDs: (1) Power;
Per 10-/100-Mbps port LEDs:
(1) TX: 100-Mbps Speeds,
(1) Link,
(1) TC,
(1) Collision,
(1) RX,
(1) Duplex;
LBG1000A-R2: Per unit LEDs:
(1) Power;
Per 10-/100-Mbps port LEDs:
(1) LNK,
(1) ACT
Operating Temperature: 32 to 104°F
(0 to 40°C)
Relative Humidity: Up to 90%,
noncondensing
Power: LB9030A–LB9032A: 100 to
240 VAC, 50 to 60 Hz, external;
LBG1000A-R2: 100 to 250 VAC,
47 to 63 Hz, autosensing,
internal power supply
Size: LB9030A–LB9032A:
1.4"H x 8"W x 5.3"D
(3.6 x 20.3 x 13.5 cm);
LBG1000A-R2:
1.75"H (1U) x 17.3"W x 9.25"D
(4.4 x 43.9 x 23.5 cm)
Weight:
LB9030A–LB9032A: 3.5 lb. (1.6 kg);
LBG1000A-R2: 7.5 lb. (3.4 kg)
Modular Managed
Express Ethernet
Switch (LBG1000A-R2)
Managed Express
Ethernet Switch
(LB9030A)
Managed Express
Ethernet Switch
(LB9030A)
Router
1000BASE-SX
Fiber Optic Cable
1000BASE-SX
Fiber Optic Cable
Internet
Servers
Cable TV
Community Center
House 1
House 2
100BASE-FX
Fiber Optic
Cable
Security
System
Security
System
Voice
over IP
Voice
over IP
PC
PC
Cable TV
100BASE-FX
Fiber Optic
Cable
Specifications
Ordering Information
ITEM CODE
Managed Express Ethernet Switches
Fixed-Port, (7) 10-/100-Mbps RJ-45 Ports plus
(1) 100-Mbps Multimode SC Port, 2 km............LB9030A
(1) 100-Mbps Multimode ST Port, 2 km ............LB9031A
(1) 100-Mbps Single-Mode SC Port, 15 km......LB9032A
Modular, (24) 10-/100-Mbps RJ-45 Ports plus
(2) Slots for Optional 1000BASE-SX
Fiber Modules ...........................................LBG1000A-R2
1000BASE-SX Fiber Module
for LBG1000A-R2.............................................LBG1001C
Bring fiber connections to your home
applications. Install one Fixed-Port
Managed Express Ethernet Switch
at each of two remote locations.
Loading...