Page 1
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 20 seconds away
at 724-746-5500 or blackbox.com.
About Black Box
Black Box Network Services is your source for more than 118,000 networking
and infrastructure products. You’ll find everything from cabinets and racks and
power and surge protection products to media converters and Ethernet switches
all supported by free, live 24/7 Tech support available in 20 seconds or less.
©
Copyright 2009. All rights reserved.
Page 2
July 2009
KVM2016A
KVM2032A
ServSwitch™ Multiuser Quick Start Guide
Extends your KVM from PS/2 or USB servers up to
100 feet (30 m) away.
Two users can control, monitor, and manage up to 16 or 32 servers
simultaneously.
Compatible monitors include VGA, SVGA, XGA, and UXGA and
higher.
®
Use with WIndows
Linux®, and other major operating systems.
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
call 724-746-5500) FREE technical support 24 hours a day, 7 days a
week: Call 724-746-5500 or fax 724-746-0746 • Mailing address:
Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Page 3
ServSwitch Multiuser Quick Start Guide
TRADEMARKS USED IN THIS MANUAL
Black Box and the Double Diamond logo are registered trademarks, and
ServSwitch is a trademark, of BB Technologies, Inc.
Mac is a registered trademark of Apple Computer, Inc.
PS/2 is a registered trademark of International Business Machines Corporation.
Linux is a registered trademark of Linus Torvalds.
Windows is a registered trademark of Microsoft Corporation.
Novell is a registered trademark of Novell, Inc.
Solaris and Sun are registered trademarks of Sun Microsystems, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the
property of the trademark owners.
724-746-5500 | blackbox.com
Page 1
Page 4
ServSwitch Multiuser Quick Start Guide
1. Introduction
All references throughout this guide to the KVM2016A also apply to the
KVM2032A. The two units are functionally the same. The KVM2016A has 16 server
ports, and the KVM2032A has 32 server ports.
The KVM2016A extends your KVM (keyboard, video, and mouse) from servers
®
with PS/2
monitor, and manage up to 16 servers simultaneously. You can connect a Power
Distribution Unit (PDU) for power management.
2. System Components
The system consists of:
• KVM2016A or KVM2032A
• Rackmounting kit
• Serial cable
or USB interfaces up to 100 feet (30 m) away. Two users can control,
• Power cord
• This printed Quick Start Guide
• A User’s Manual on CD-ROM
3. Compatibility
The KVM2016A is compatible with:
• PS/2 or USB interface computers/servers
• VGA, SVGA, or XGA monitors (UXGA and higher)
• Windows
®
, Linux®, and other major operating systems
Page 2
724-746-5500 | blackbox.com
Page 5
ServSwitch Multiuser Quick Start Guide
Power Link
12
Local
4. The ServSwitch Unit
4.1 Front Panel
Figure 1 illustrates the front panel of either the KVM2016A or the KVM2032A.
Table 1 describes its components.
1
3
2
Figure 1. KVM2016A or KVM2032A front panel.
Table 1. Front panel components.
Number Component Description
1 Power LED Lights when unit is powered on
2 Link LED Lights when the unit is connected
to the network
3 Local LEDs Lights when the corresponding user is
1 and 2 administering a target
4.2 Back Panel
Figures 2 and 3 illlustrate the KVM2016A and KVM2032A back panels and Table
2 describes their components.
9
10
6
7
724-746-5500 | blackbox.com
4
5
4
5
8
Figure 2. KVM2016A’s back panel.
Page 3
Page 6
ServSwitch Multiuser Quick Start Guide
4 4
9 10
6
5
7
Figure 3. KVM2032A’s back panel.
Number Component Description
4 User 1 and User 2 Connect (2) KVM consoles for
HD15 connectors (2) users to operate the ServSwitch
5 User 1 and User 2 Connect keyboards and mice for
USB Type A connectors (2) users to operate the ServSwitch
6 RJ-45 connector Attach the serial remote power switch
for RPS port
7 RJ-45 connector Connect to 10/100 Mbps Ethernet to
for Config port configure and update the unit
8 (16) or (32) RJ-45 Link to servers via SAMs
server ports
5
Table 2. Back panel components.
8
9 Power connector Connect 120 VAC power
10 I/O power switch Turns power on or off
5. Pre-Installation Guidelines
• Place cables away from fluorescent lights, air conditioners, and machines that
are likely to generate electric noise.
• Place the ServSwitch Multiuser on a flat, clean, and dry surface or install it in a
rack.
• Make sure that the maximum distance between each computer and the
ServSwitch doesn’t exceed 100 feet (30 m).
To rackmount the ServSwitch, refer to its user’s manual.
Page 4
724-746-5500 | blackbox.com
Page 7
ServSwitch Multiuser Quick Start Guide
6. Connecting the System
Figure 4 illlustrates the ServSwitch Multiuser system overview.
Keyboard,
monitor, and
mouse connected
to KVM User 2
ports
PDU connected
to RPS port
Figure 4. ServSwitch Multiuser system overview.
PDU
To servers
SAMs
6.1 The SAMs
Each computer/server is directly connected to the ServSwitch Multiuser via the
appropriate SAM using CAT5 cable in a star configuration. No external power is
needed at the SAMs. They draw their power from the computer’s keyboard port
(SAM PS/2) or from the USB port (SAM USB). Figures 5 and 6 show the SAM PS/2
and the SAM USB.
724-746-5500 | blackbox.com
Page 5
Page 8
ServSwitch Multiuser Quick Start Guide
To computer’s
video card
To computer’s
mouse port
To computer’s
keyboard port
Figure 5. SAM PS/2 (KV1120A).
To computer’s
USB port
Page 6
To computer’s
video card
Figure 6. SAM USB (KV1121A).
724-746-5500 | blackbox.com
Page 9
ServSwitch Multiuser Quick Start Guide
6.2 Connecting a SAM PS/2
You can connect the SAM PS/2 to a powered on computer in the following order
(see Figure 7):
1. Connect the mouse connector to the computer’s mouse port.
2. Connect the keyboard connector to the computer’s keyboard port.
3. Connect the screen connector to the computer’s video port.
If you don’t follow the order listed above when connecting while the server is
running, the mouse may not function correctly until you reboot the server.
To video port
To keyboard
and mouse
ports
CAT5 cable to
switch server
port
Figure 7. SAM PS/2 connections (KV1120A).
6.3 Connecting a SAM USB
The SAM USB supports Windows 98 SE and later, Mac®, Sun®, and SGI, and all
modern Linux distributions. Figure 8 shows the SAM USB.
To connect the SAM USB:
1. Connect the screen connector to the computer’s video port.
2. Connect the USB connector to the computer‘s USB port.
724-746-5500 | blackbox.com
Page 7
Page 10
ServSwitch Multiuser Quick Start Guide
To video port
To USB port
CAT5 cable to
switch server
port
Figure 8. SAM USB (KV1121A).
6.4 Connecting the CAT5 Cables
1. Attach one connector to the SAM’s RJ-45 port.
2. Connect the other connector to one of the ServSwitch Multiuser’s server
ports.
3. Repeat steps 1 and 2 for each computer.
6.5 Connecting the Two KVM Consoles
Connect a keyboard, monitor, and mouse to the user 1 and user 2 ports as
follows:
1. Connect the monitor connectors to the monitor ports.
2. Connect the keyboard connectors to the keyboard ports.
3. Connect the mouse connectors to the mouse ports.
6.6 Connecting to the Power Supply
1. Using the included power cord, connect the ServSwitch Multiuser to a socket
outlet that has a grounding connection. Use only the power cord you received
with the unit.
2. Switch on the unit.
Page 8
724-746-5500 | blackbox.com
Page 11
ServSwitch Multiuser Quick Start Guide
7. Configuring the System
Configuring the system includes assigning server names, user and security
settings, and maintenance.
7.1 Connecting to the Local Area Network (LAN)
Configure the unit via a Web interface. Connect a network cable to the LAN port
of the ServSwitch Multiuser.
7.2 Setting Network Parameters via the OSD
By default, the ServSwitch Multiuser boots with an automatically assigned IP
address from a Dynamic Host Configuration Protocol (DHCP) server on the network.
The DHCP server provides a valid IP address, gateway address, and subnet mask.
You can identify the IP address from the OSD. Where there is no DHCP server,
set the IP address via the OSD as follows:
1. From the local keyboard, press left Shift twice. The OSD Main window
appears. See Figure 9.
2. Press F2. The Settings window appears. See Figure 10.
724-746-5500 | blackbox.com
Figure 9. Main menu.
Page 9
Page 12
ServSwitch Multiuser Quick Start Guide
Figure 10. Settings window.
Using the Tab key, navigate downwards in the Settings window. At the bottom
of the window, press the Tab key to go to the top of the window. To change settings, type in the selected area or press the spacebar.
8. Web Configuration
1. Open your Web browser.
2. Type the ServSwitch Multiuser unit’s system IP address: http or https://IP
address/ and press Enter. The login page appears.
3. Type the default administrator user name—admin—and password—access—
(both lower case).
4. Press Enter. The Web interface opens at the Targets page. See Figure 11.
Page 10
724-746-5500 | blackbox.com
Page 13
ServSwitch Multiuser Quick Start Guide
Server Name Server Status
Off
On
On
On
On
On
On
Off
Off
Off
Off
Off
Off
Off
Off
Off
File Server
KVManager
Windows 2003
ESX 3i 3.5
Windows XP
Server 06
Novell SuSE
Server 08
Server 09
Server 10
Server 1 1
Server 12
Server 13
Server 14
Server 15
Server 16
admin: T a rgetsNetwork
Password
No. T a rgets
Configuration
Event Log
Logout
User
9. Configuring the System
Configure the system via a Web interface. First, connect a network cable to the
ServSwitch unit’s LAN port. Then, power on the ServSwitch.
For system configuration and operation, see the user’s manual.
724-746-5500 | blackbox.com
Figure 11. Targets page.
Page 11
Loading...