Black Box FX139A, FX134A Specifications
Route incoming calls to any automatic or
manual-dial telephone device.
Route incoming calls to any automatic or
manual-dial telephone device.
Phone Line Manager Pro Master
© 2007. All rights reserved. Black Box Corporation.
FREE 24-hour Tech Support: 724-746-5500
blackbox.com
2 of 3
8/24/2007
#19871
724-746-5500 blackbox.com
FEA TURES
• Seven programmable features including
tone time, silence time, time before first
tone, number of tones, call hold, call
override, disconnect time.
• Automatically routes modem calls
through data-sharing devices.
• Sends 1 of 10 different calling tones.
• Wallmount case with 4-way line
cord guides.
• Power and telephone-line
surge protection.
• Great for polling of modems in
multiple locations.
Connect a Phone Line Manager Pro Master to a Phone Line Manager Pro 104
functioning as a slave at a remote location (see Figure 1).
Or add a local Phone Line Manager , as shown in Figure 2.
OVERVIEW
To access devices such as computers, scales, point-of-sale
terminals, and smart building interfaces connected to a
BLACK BOX
®
Phone Line Manager 104 (FX134A) in a remote
location, choose the Phone Line Manager Pro Master
(FX139A).
You can automatically route telephone calls from the
Master at a local site to any one of three ports on the Phone
Line Manager 104 functioning as a slave at a remote site.
The Phone Line Manager Pro Master works by producing
a variety of routing tones on outbound phone calls. By
assigning different frequency tones to each port on the Phone
Line Manager Pro 104, calls are automatically routed through
the 104 to the correct device.
(For more information about the Phone Line Manager Pro
104 as a data sharer, see Pr oduct Data Sheet 19345.)
Two configurations are common:
• As stated before, you can connect the Phone Line
Manager Pro Master using a dedicated phone line to a
remote Phone Line Manager Pro 104 functioning as a
slave (see Figure 1 above).
• If a dedicated phone line isn’t available and you need to
attach other phone devices, simply add a second Phone
Line Manager at the local end (see Figure 2 above). The
second 104 gives you access to a computer, fax, and
modem connected to the same phone line as the Phone
Line Manager Pro Master. And the local 104 provides the
isolation you need to protect your equipment from
interference caused by other tone-generating devices.
The Phone Line Manager Pro Master even allows polling
of modems in multiple locations when used with a Phone Line
Phone Line
Manager Pro
Master (FX139A)
Phone Line
Manager Pro
Master (FX139A)
Local site
Remote site
Local site
Remote site
Computer
Modem
Phone Line Manager
Pro 104 (FX134A)
functioning as a slave
Fax
Computer
Phone
PSTN
Phone
Fax
Computer
Computer
Phone
PhoneFax Computer Phone
Modem
Second local
Phone Line
Manager
Phone Line Manager
Pro 104 (FX134A)
Functioning as a Slave
Figure 1
Figure 2
PSTN
Loading...