Black Box C6AMP70-24, C6AMP70-48 User Manual

C6AMP70-24

C6AMP70-48

24- and 48-Port Category 6A Staggered Patch Panels

Staggered design helps minimize ANEXT between
ports for 10-Gigabit Ethernet applications.

• Designed for Category 6A UTP jacks.

• Staggered port design keeps alien near-end crosstalk (ANEXT) low

to improve performance.

Customer

Support

Information

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: w ww.blackbox.com • E-mail : [e-mail]

24- and 48-Port Category 6A Staggered Patch Panels User Manual

Specifications

Number of Ports — C6AMP70-24: 24;

C6AMP70-48: 48

Size — C6AMP70-24: 1.75"H (1U) x 19"W x 0.4"D
(4.4 x 48.3 x 1.1 cm);
C6AMP70-48: 3.5"H (2U) x 19"W x 0.4"D
(8.9 x 48.3 x 1.1 cm)

Weight — C6AMP70-24: 0.89 lb. (0.4 kg);
C6AMP70-48: 1.77 lb. (0.81 kg)

Overview

This Category 6A Staggered Patch Panel is specially designed for high-speed 10-Gigabit Ethernet applications. The staggered
ports provide more spacing between ports to help minimize alien near-end crosstalk (ANEXT), which is a critical
measurement for Category 6A. The panel is made of cold rolled steel and comes with one or two rear cable
management bars to support the individual cabling runs. You can install the panel in a standard 19" relay rack or cabinet.

What’s Included

Your package should include the following items. If anything is missing or damaged, please contact Black Box at

724-746-5500 or [e-mail].

C6AMP70-24:

• (1) Category 6A Staggered Patch Panel

• (4) 10-32 cup head screws

• (4) 12-24 cup head screws

• (1) Rear Cable Management Bar

• (1) User’s Manual

C6AMP70-48:

• (1) Panel

• (1) Set of 4, 10-32 cup head screws

• (1) Set of 4, 12-24 cup head screws

• (2) Rear Cable Management Bars

• This user’s manual

Page 2

724-746-5500 | blackbox.com