Black Box ACXC48F16, ACX080, ACXC8F, ACXC8, ACXC32F User Manual
...
Provides flexible and super-fast crosspoint
switching of Full HD video in KVM enterprises.
ServSwitch
™
DKM FX and DKM FX Compact
Order toll-free in the U.S. : Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail : info @blackbox.com
Customer
Support
Information
ACX048 ACXC8 ACXC32 ACXC64 ACXC48F16
ACX080 ACXC8F ACXC32F ACXC64F ACXC48F32
ACX160 AC XC16 ACXC48 AC XC80
ACX288 ACXC16F ACXC48F ACXC80F
Page 2
724-746-5500 | blackbox.com
Trademarks Used in this Manual
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks, and
ServSwitch is a trademark, of BB Technologies, Inc.
Mac is a registered trademark of Apple Computer, Inc.
IBM is a registered trademark of International Business Machines Corporation.
Java is a registered trademark of Oracle Corporation.
TOSLINK is a registered trademark of Toshiba Corporation.
Any other trademarks mentioned in this manual are acknowledged to be
the property of the trademark owners.
NOTE: The ServSwitch DKM FX and the ServSwitch DKM FX Compact function in
similar ways. The difference between them is described in the table below.
Table 1. ServSwitch DKM FX and DKM FX Compact comparison.
ServSwitch DKM FX Compact ServSwitch DKM FX
Number of Ports 8-, 16-, 32-, 48-, 64-, 80-port options 48-, 80-, 160-, 288-port options
Type of Ports CATx /Fiber CATx/fiber I/O ports dependent on I/O card
Form Factor Small form factor (1/2U) Large form factor (4U+)
Modular or Not Not modular Modular
Disclaimer
Black Box Network Services shall not be liable for damages of any kind, including,
but not limited to, punitive, consequential or cost of cover damages, resulting
from any errors in the product information or specifications set forth in this document and Black Box Network Services may revise this document at any time without notice.
Page 3
724-746-5500 | blackbox.com
FCC and IC RFI Statements/NOM Statement
FEDERAL COMMUNICATIONS COMMISSION AND
INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio-frequency energy,
and if not installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, may cause inter ference to radio communication.
It has been tested and found to comply with the limits for a Class A computing
device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference
when the equipment is operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference, in which case
the user at his own expense will be required to take whatever measures may be
necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise
emis sion from digital apparatus set out in the Radio Interference Regulation
of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe A prescrites dans le
Règlement sur le brouillage radioélectrique publié par Industrie Canada.
Normas Oficiales Mexicanas (NOM)
Electrical Safety Statement
INSTRUCCIONES DE SEGURIDAD
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes
de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para
referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de
operación deben ser respetadas.
Page 4
724-746-5500 | blackbox.com
NOM Statement
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,
cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,
etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales
que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea
recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá
lo descrito en las instrucciones de operación. Todo otro servicio deberá ser
referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no
interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,
alfombra o superficie similar puede bloquea la ventilación, no se debe
colocar en libreros o gabinetes que impidan el flujo de aire por los orificios
de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor
como radiadores, registros de calor, estufas u otros aparatos (incluyendo
amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del
tipo descrito en el instructivo de operación, o como se indique en el
aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la
polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no
sean pisados ni pellizcados por objetos colocados sobre o contra ellos,
poniendo particular atención a los contactos y receptáculos donde salen
del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las
recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las
lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea
usado por un largo periodo de tiempo.
Page 5
724-746-5500 | blackbox.com
NOM Statement
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean
derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
Page 6
724-746-5500 | blackbox.com
Safety Instructions
Safety Instructions
For reliable and safe long-term operation of your ServSwitch DKM FX, follow these
guidelines:
Installation
• Only use the device according to this user manual.
• Only use in dry, indoor environments.
• The ServSwitch DKM FX and the power supply units can get warm. Don’t put them
in an enclosed space without any airflow.
• Do not obscure ventilation holes.
• Only use power supplies originally supplied with the product or manufacturerapproved replacements. Do not use a power supply if it appears to be defective or
has a damaged case.
• Connect all power supplies to grounded outlets. In each case, make sure that the
ground connection is maintained from the outlet socket to the power supply’s AC
power input.
• Do not connect the link interface to any other equipment, particularly network or
telecommunications equipment.
• Only connect devices to the serial interface that are sufficiently secured against
short circuits and false voltages at the serial interface.
• To disconnect the switch from the power supply, remove the power cords of all
power supply units that are in use or set the power switch (if available) to the OFF
position.
• Take any required ESD precautions.
Repair
• Do not attempt to open or repair a power supply unit.
• Do not attempt to open or repair the ServSwitch DKM FX. There are no
user-serviceable parts inside.
• Contact Black Box Technical Support at 724-746-5500 or info@blackbox.com
if there is a fault.
Page 7
724-746-5500 | blackbox.com
Table of Contents
Chapter Page
1. Specifications .........................................................................................11
1.1 Interfaces .........................................................................................11
1.1.1 DVI-D Single Link ..................................................................11
1.1.2 USB HID ................................................................................11
1.1.3 RJ-45 (Network) ....................................................................11
1.1.4 RS-232 (Serial) .......................................................................12
1.1.5 RJ-45 (Interconnect) ..............................................................12
1.1.6 Fiber SFP Type LC (Interconnect) ...........................................12
1.1.7 SDI (Interconnect) ..................................................................12
1.2 Interconnect Cable ..........................................................................12
1. 2.1 CATx......................................................................................12
1.2.2 Fiber ......................................................................................13
1.2.3 Coaxial ..................................................................................14
1.3 Connector Pinouts ...........................................................................15
1.3.1 CPU Board .............................................................................15
1.3.2 I/O Board CATx .....................................................................16
1.3.3 I/O Board SFP ........................................................................16
1.3.4 I/O Board SDI ........................................................................17
1.4 Power Supply, Environment, Dimensions, Weight, and MTBF .........17
2. Overview............ ......................................................................................21
2.1 Description ......................................................................................21
2.1.1 Application ............................................................................21
2.1. 2 Access Options ..................................................................... 22
2.2 System Overview ............................................................................ 22
2.3 Available Products ...........................................................................24
2.4 What’s Included ..............................................................................26
2.5 Device Views ...................................................................................27
2.5.1 ServSwitch DKM FX 48-Port (ACX048) ................................27
2.5.2 ServSwitch DKM FX 80-Port (ACX080) ................................28
2.5.3 ServSwitch DKM FX 160-Port (ACX160) ...............................29
2.5.4 ServSwitch DKM FX 288-Port (ACX288) ............................. 30
2.5.5 ServSwitch DKM FX Compact 8-Port (ACXC8) .....................31
2.5.6 ServSwitch DKM FX Compact 8-Port, Fiber (ACXC8F) ..........32
2.5.7 ServSwitch DKM FX Compact 16-Port (ACXC16) ................ 33
2.5.8 ServSwitch DKM FX Compact 16-Port, Fiber (ACXC16F) ..... 34
2.5.9 ServSwitch DKM FX Compact 32-Port (ACXC32) ................ 35
2.5.10 ServSwitch DKM FX Compact 32-Port, Fiber (ACXC32F) ..... 36
2.5 .11 ServSwitch DKM FX Compact 48-Port (ACXC48) .................37
Page 8
724-746-5500 | blackbox.com
Table of Contents
Chapter .................................................................................... Page
2.5.12 ServSwitch DKM FX Compact 48-Port, Fiber (ACXC48F) .... 38
2.5.13 ServSwitch DKM FX Compact 64-Port (ACXC64) ................ 39
2.5.14 ServSwitch DKM FX Compact 80-Port, Fiber (ACXC64F) .... 40
2.5.15 ServSwitch DKM FX Compact 80-Port (ACXC80) .................41
2.5.16 ServSwitch DKM FX Compact 80-Port, Fiber (ACXC80F) .....42
2.5.17 ServSwitch DKM FX Compact 48 CATx Ports,
16 Fiber Ports (ACXC48F16) ................................................. 43
2.5.18 ServSwitch DKM FX Compact 48 CATx Ports,
32 Fiber Ports (ACXC48F32) ................................................ 44
2.6 Diagnostics and Status ................................................................... 45
2.6.1 Status LEDs ........................................................................... 45
2.6.2 Port Status ............................................................................ 53
2.6.3 Port Status Matrix Grid ......................................................... 57
2.6.4 Extender OSD ....................................................................... 58
2.6.5 Network Status .....................................................................59
2.6.6 Firmware Status .....................................................................61
2.6.7 Firmware Status Extender ..................................................... 63
2.7 Trace Function ................................................................................ 64
2.8 Syslog Monitoring .......................................................................... 64
2.9 SNMP ........................................................................................ 66
2.10 System Check .................................................................................70
3. Installation ............................................................................................. 72
3.1 Package Includes ............................................................................ 72
3.2 System Setup .................................................................................. 72
3.3 Example Applications ......................................................................74
3.3.1 KVM Matrix ..........................................................................74
3.3.2 Video Matrix .........................................................................75
3.3.3 Parallel Operation (Stacking)..................................................76
3.3.4 Matrix Grid ........................................................................... 77
3.3.5 Cascading ............................................................................ 79
4. Configuration ........................................................................................ 80
4 .1 Command Mode ............................................................................ 80
4.2 Control Options .............................................................................. 82
4. 2.1 Control via OSD ................................................................... 82
4.2.2 Control via Java Tool ............................................................ 86
4.2.3 Control via Serial Interface ................................................... 95
Page 9
724-746-5500 | blackbox.com
Table of Contents
Chapter ......................................................................................... Page
4.3 Assignment .................................................................................... 96
4.3.1 Virtual CPU ........................................................................... 96
4.3.2 Virtual Console ..................................................................... 98
4.4 System Settings .............................................................................101
4.4.1 System Data ........................................................................101
4.4.2 Automatic ID ...................................................................... 104
4.4.3 Access ................................................................................ 106
4.4.4 Switch ................................................................................ 109
4.4.5 Network ..............................................................................112
4.4.6 Date and Time ..................................................................... 115
4.5 User Settings ..................................................................................118
4.5 .1 User Data ............................................................................118
4.5.2 Favorites List Users ..............................................................122
4.5.3 User Macros ........................................................................125
4.6 Extender Settings ..........................................................................128
4.6 .1 Creating Flex-Port Extender Units ........................................130
4.6.2 Creating Fixed-Port Extender Units .....................................131
4.6.3 Deleting Flex-Port Extender Units ........................................131
4.6.4 Deleting Fixed-Port Extender Units ......................................131
4.7 USB 2.0 .........................................................................................131
4.8 CPU Settings ..................................................................................13 4
4.9 Console Settings ............................................................................139
4.9.1 CON Devices .......................................................................139
4.9.2 Mouse and Keyboard ..........................................................143
4.9.3 Extender OSD ......................................................................146
4.9.4 Favorite List Consoles ......................................................... 148
4.9.5 Console Macros ..................................................................150
4.9.6 Parallel Operation ................................................................154
4.9.7 Multi-Screen Control ...........................................................156
4.10 Saving and Loading of Configurations .........................................160
4.10.1 Active Configuration ..........................................................160
4.10.2 Saving of Configurations (Internal) ....................................160
4.10.3 Loading of Configurations (Internal) ..................................162
4.10.4 Saving of Configurations (External)................................... 164
4.10.5 Loading of Configurations (External) .................................165
4.11 Export and Import Options ..........................................................166
4.11.1 Export Options ....................................................................167
4.11.2 Import Options ...................................................................167
Page 10
724-746-5500 | blackbox.com
Table of Contents
Chapter ......................................................................................... Page
4 .12 Matrix Cascading ....................................................................... 168
4.13 Matrix Grid ..................................................................................172
4.14 Firmware Update ..........................................................................176
4.14.1 Matrix Update .....................................................................176
4.14.2 Extender Update .................................................................178
4 .15 License Management ...................................................................182
5. Operation ....................................................................................... 184
5.1 Operation via Hotkeys ................................................................ 184
5.1.1 Direct Switching .............................................................. 184
5.1.2 Scan Mode ..................................................................... 186
5.1.3 Function Keys <F1> – < F12> .............................................186
5.1.4 Addressing of Main and Sub Matrices ............................ 186
5.2 KVM Switching ............................................................................187
5.3 Extended Switching .....................................................................191
5.4 CON Switch .................................................................................196
5.5 Multi-Screen Control ...................................................................198
5.6 USB 2.0 Switching .......................................................................199
5.7 Presets ........................................................................................199
5.8 Serial Interface .............................................................................199
5.9 Power On and Power Down Functions ........................................201
5.9.1 Restart .............................................................................201
5.9.2 Factory Reset ...................................................................202
5.9.3 Power Down ....................................................................202
5.10 Summary of Keyboard Commands ..............................................203
5 .11 Serial Interface ............................................................................ 206
6. Serial Control ........................................................................................201
7. Troubleshooting ...................................................................................218
7.1 External Failure ..............................................................................218
7. 2 Video Interference .........................................................................218
7. 3 Fans Malfunction ...........................................................................218
7. 4 Power Supply Units Malfunction ...................................................219
7. 5 Network Error ................................................................................219
7. 6 ServSwitch DKM FX Failure ...........................................................219
7.7 Blank Screen ................................................................................. 220
7. 8 Contacting Black Box.................................................................... 220
7.9 Shipping and Packaging ................................................................221
Appendix. Glossary .................................................................................... 222
Page 11
724-746-5500 | blackbox.com
Chapter 1: Specifications
1. Specifications
1.1 Interfaces
1.1.1 DVI-D Single Link
The video interface supports the DVI-D protocol. All signals that comply with
DVI-D single-link standard can be transmitted. This includes, for example, monitor
resolutions such as 1920 x 1200 @ 60 Hz, Full HD (1080p), or 2K HD (up to 2048
x 1152). Data rate is limited to 165 MPixel/s.
1.1.2 USB HID
Devices with USB HID interface support a maximum of two devices with
USB HID protocol. Each USB HID port provides a maximum current of 100 mA.
Keyboard
The DKM FX or FXC is compatible with most USB keyboards. Certain keyboards
with additional functions may require custom firmware to operate. Keyboards with
an integral USB Hub (Mac® keyboards, for example) are also supported, but you
cannot use more than two active USB HID devices on the DVI and USB HID cards.
Mouse
Compatible with most 2-button, 3-button, and scroll mice.
Other USB HID devices
The proprietary USB emulation also supports certain other USB HID devices, such
as specific touchscreens, graphics tablets, bar-code scanners, or special keyboards.
Support cannot be guaranteed, however, for every USB HID device.
NOTE: Only two USB HID devices are supported concurrently, such as keyboard
and mouse or keyboard and touchscreen. A hub is allowed, but it does not
increase the number of HID devices allowed.
To support other USB “non-HID” devices, such as scanners, Web cams or memory
devices, choose our devices with transparent USB support.
1.1.3 RJ-45 (Network)
CATx device communication requires a 1000BASE-T connection. Pin the cable
according to EIA/TIA-568-B (1000BASE-T) standard with RJ-45 connectors at both
ends. All four wire pairs are used in both directions. The cabling is suitable for
full-duplex operation. For the cable connection to a source (computer, CPU), use a
cross-pinned network cable.
Page 12
724-746-5500 | blackbox.com
Chapter 1: Specifications
1.1.4 RS-232 (Serial)
The communication takes place with a transmission speed of up to 115.2 kbps,
regardless of the file format, eight data bits and a stop bit, but without a parity
bit. Limited hardware handshake (DSR) is possible.
1.1.5 RJ-45 (Interconnect)
CATx device communication requires a 1000BASE-T connection.
Connector wiring must comply with EIA/TIA-568-B (1000BASE-T), with RJ-45
connectors at both ends. All four wire pairs are used.
1.1.6 Fiber SFP Type LC (Interconnect)
Fiber device communication is performed via Gigabit SFPs connected to suitable
fibers fitted with LC connectors (see Section 1.2.2).
NOTE: The correct function of the device can only be guaranteed with SFPs
provided by Black Box.
CAUTION: SFP modules can be damaged by electrostatic discharge (ESD). Follow
ESD handling precautions.
1.1.7 SDI (Interconnect)
SDI device communication requires a mini coax connection with mini BNC
connectors or 3G SFPs with transmission speeds of 0.360 Gbps (SD-SDI, SMPTE
259M), 1.485 Gbps (HD-SDI, SMPTE 292M), and 2.970 Gbps (3G SDI).
1.2 Interconnect Cable
1. 2.1 CATx
NOTE: A point-to-point connection is required. Operation with several patch
cables is possible. Routing over an active network component, such as an
Ethernet hub or router is not allowed.
• Avoid routing CATx cables along power cables.
• If the site has three-phase AC power, make sure that the CPU Unit and
CON Unit are on the same phase.
NOTE: To maintain regulatory EMC compliance, use correctly installed shielded
CATx cable throughout the interconnection link.
NOTE: To maintain regulatory EMC compliance, all CATx cables need to carry
ferrites on both cable ends close to the device.
Type of Interconnect Cable
The ServSwitch DKM FX requires interconnect cabling specified for Gigabit
Ethernet (1000BASE-T). Use solid-core (24 AWG), shielded, CAT5e (or better)
cable.
Page 13
724-746-5500 | blackbox.com
Chapter 1: Specifications
Table 1-1. CATx interconnect cable.
Ca ble Type Description
CATx solid-core 24 AWG cable
This S/UTP (CAT5e) cable confoms to EIA/TIA-568-B.
Uses four pairs of 24 AWG wires. Connects according
to EIA/TIA-568-B (1000BASE-T).
CATx solid-core 26/ 8 AWG cable
This S/UTP (CAT5e) cable confoms to EIA/TIA-568-B.
Uses four pairs of 26/8 AWG wires. Connects according
to EIA/TIA-568-B (1000BASE-T).
NOTE: You can use use type 26/8 AWG flexible cables (patch cables), but the
maximum possible extension distance is cut in half.
Table 1-2. Maximum acceptable cable length.
Ca ble Type Distance
CATx 24 AWG solid conductor cable 400 ft. (140 m)
CATx 26/8 AWG stranded conductor cable 200 ft. (70 m)
1.2.2 Fiber
NOTE: A point-to-point connection is necessary. Operation with multiple patch
panels is allowed. Routing over active network components, such as
Ethernet hubs, matrices, or routers, is not allowed.
Type of Interconnect Cable
Table 1-3. Fiber interconnect cable.
Ca ble Type Description
Single-mode, 9-µm
• Two fibers, 9-µm
• In-house patch cable (EFN092)
Multimode 50-µm
• Two fibers, 50-µm
• In-house patch cable (EFN6020)
Multimode 62.5-µm
• Two fibers, 62.5-µm
• In-house patch cable (EFN116-LCLC)
NOTE: Only use single-mode cables for fiber connections that are based on 3G
SFPs.
Page 14
724-746-5500 | blackbox.com
Chapter 1: Specifications
Table 1-4. Maximum acceptable fiber cable length.
Ca ble Type Distance
Single-mode 9-µm 32,800 ft. (10,000 m)
Multimode 50-µm (OM3) 3280 ft. (1000 m)
Multimode 50-µm 1300 ft. (400 m)
Multimode 62.5µm 650 ft. (200 m)
NOTE: If you use single-mode SFPs with multimode fiber optic cable, you can
double the maximum acceptable cable length.
Type of Connector
The fiber cable uses LC connectors.
1.2.3 Coaxial
NOTE: A point-to-point connection is necessary.
Table 1-5. Coaxial interconnect cable.
Ca ble Type Description
Mini coaxial cable, 18 AWG
RG-6
Impedance: 75 ohms
Table 1-6. Maximum acceptable coaxial cable length.
Bandwidth Distance
0.270 Gbps 1312 ft. (400 m)
1.485 Gbps 459 ft. (140 m)
2.970 Gbps 394 ft. (120 m)
Type of Connector
The coaxial cable uses mini BNC connectors.
Page 15
724-746-5500 | blackbox.com
Chapter 1: Specifications
1.3 Connector Pinouts
1.3.1 CPU Board
Figure 1-1. DVI-D single-link connector.
Table 1-7. DVI-D single-link connector pinout.
Pin Signal Pin Signal Pin Signal
1 T.M.D.S. data 2- 9 T.M.D.S. data 1- 17 T.M.D.S. data 0-
2 T.M.D.S. data 2+ 10 T.M.D.S. data 1+ 18 T.M.D.S. data 0+
3 T.M.D.S. data 2 GND 11 T.M.D.S. data 1 GND 19 T.M.D.S. data 0 GND
4 Not connnected 12 Not connected 20 Not connected
5 Not connected 13 Not connected 21 Not connected
6 DDC input (SCL) 14 +5 VDC high impedance 22 T.M.D.S. GND
7 DDC output (SDA) 15 GND 23 T.M.D.S. clock+
8 Internal use 16 Hot plug recognition 24 T.M.D.S. clock-
C1 Internal use — — C3 Internal use
C2 Not connected C5 GND C4 Internal use
Table 1-8. USB Type A connector.
Picture Pin Signal Color
1 VCC (+5 VDC) Red
2 Data - White
3 Data + Green
4 GND Black
Page 16
724-746-5500 | blackbox.com
Chapter 1: Specifications
Table 1-9. DB9 (serial) connector.
Picture Pin Signal Color Signal
9 Not connected 4 DTR
8 CTS 3 TxD
7 RTS 2 RxD
6 DSR 1 Not connected
5 GND — —
Table 1-10. RJ-45 connector.
Picture Pin Signal Color Signal
1 D1+ 5 Not connected
2 D1- 6 D2-
3 D2+ 7 Not connected
4 Not connected 8 Not connected
1.3.2 I/O Board CATx
Table 1-11. RJ-45 CATx connector.
Picture Pin Signal Color Signal
1 D1+ 5 D3-
2 D1- 6 D2-
3 D2+ 7 D4+
4 D3 + 8 D4-
1.3.3 I/O Board SFP
Table 1-12. LC fiber connector.
Picture Diode Signal
1 Data OUT
2 Data IN
Page 17
724-746-5500 | blackbox.com
Chapter 1: Specifications
1.3.4 I/O Board SDI
Table 1-13. RJ-45 connector.
Picture Pin Signal
1 Data In
2 GND
1.4 Power Supply, Environment, Dimensions, and Weight
Power ACXC48, ACXC48F, ACXC32, ACXC32F, ACXC16, ACXC16F:
1.4 A, 100–240 VAC, 50–60 Hz internal power supply;
ACXC80, ACXC80F, ACXC64, ACXC64C, ACXC48F32,
ACXC48F16: 2.3 A, 100–240 VAC, 50–60 Hz;
ACXC80, ACXC80F, ACXC48F32: Max. 125 W;
ACXC64, ACXC64F, ACXC48F16: Max. 105 W;
ACXC48, ACXC48F: Max. 90 W;
ACXC32, ACXC32F: Max. 65 W;
ACXC16, ACXC16F: Max. 40 W;
ACXC8, ACXC8F: Max. 13 W;
ACX048: 5 A, 94 W max. without I/O boards;
ACX080, ACX080-PS: 5 A, 99 W max. without I/O boards;
ACX160, ACX160-PS: 9 A, 188 W max. without I/O boards;
ACX288, ACX288-PS: 12 A, 202 W max. without I/O boards;
I/O boards (ACXI08-C, ACXI08-SM, ACXI08-SPF): 13 W max.
Environment Temperature Tolerance:
Operating: +41 to +113° F (+5 to +45° C);
Storage: -13 to +140° F (-25 to +60° C);
Relative Humidity: Max. 80%, non-condensing
Page 18
724-746-5500 | blackbox.com
Chapter 1: Specifications
Specifications
Dimensions ACX288: 19"H x 22.8"W x 12"D (48.3 x 57.8 x 33 cm),
Shipping box: 25.6"H x 26.8"W x 29.9"D (65 x 68 x
76 cm);
ACX160: 19"H x 15.8"W x 12"D (48.3 x 40 x 33 cm),
Shipping box: 25.6"H x 26.8"W x 12"D (65 x 68 x 54 cm);
ACX080: 19"H x 7"W x 9.1"D (64 x 57 x 36 cm),
Shipping box: 25.2"H x 22.4"W x 21.3"D (64 x 57 x
36 cm);
ACX048: 19"H x 5.3"W x 9.1"D,
Shipping box: 25.2" x 22.4"W x 12.4"D (64 x 57 x 23.1 cm);
ACXC8, ACXC8F: 1.7"H x 8.75"W x 5.75"D (4.3 x 22.3 x
14.6 cm) ;
ACXC48, ACXC48F, ACXC32, ACXC32F, ACXC16,
ACXC16F: 1.7"H x 17.4"W x 16.9"D
(4.4 x 44.4 x 42.9 cm);
ACXC48F16, ACXC48F32: ACXC64, ACXC64F, ACXC80,
ACXC80F: 3.4"H x 17.48"W x 16.88"D (8.6 x 44.4 x
42.9 cm)
Weight ACX288: 76.2 lb (34.6 kg) fully equipped,
Shipping box: 90.6 lb. (41.1 kg);
ACX160: 60 lb. (26.3 kg) fully equipped,
Shipping box: 69.9 lb. (31.7 kg);
ACX080: 24.5 lb. (11.1 kg) fully equipped,
Shipping box: 34.4 lb. (15.6 kg);
ACX048: 19.6 lb. (8.9 kg),
Shipping box: 26.7 lb. (12.1 kg)
ACXC80, ACXC80F, ACXC48F32: 15.9 lb. (7.2 kg);
ACXC64, ACXC64F, ACXC48F16: 15.4 lb. (7 kg);
ACXC48, ACXC48F: 9 lb. (4.1 kg);
ACXC32, ACXC32F: 8.8 lb. (4 kg);
ACXC16, ACXC16F: 8.6 lb. (3.9 kg);
ACXC8, ACXC8F: 1.9 lb. (0.9 kg)
Page 19
724-746-5500 | blackbox.com
Chapter 1: Specifications
Specifications
MTBF The mean time between failure (MTBF) in power-on hours
(POH) is listed here. The estimate is based on the FIT rates of
the parts included. FIT rates are based on normalized environmental conditions of T = 60°C and activation energy (Ea) of
0.7 eV. Calculations are based on 90% confidence limit.
We estimate that inside the housing, temperature will be 15°C
higher than the ambient temperature. Therefore, the MTBF
calculation refers to an ambient temperature of 45°C. The
humidity is limited to 60%.
ACX288: 260,000 POH;
ACX160: 310,000 POH;
ACX080: 320,000 POH;
ACX048: 350,000 POH;
CPU board: 480,000 POH;
I/O board SFP: 500,000 POH;
I/O board CATx: 410,000 POH
DKM FX 288/160 PSU: 200,000 POH;
DKM FX 80/48 PSU: 130,000 POH;
ACXC80: Chassis: 90,690;
Per fan: 280,000 POH,
Per PSU: 238,000;
ACXC80F: Chassis: 83,350;
Per fan: 280,000 POH,
Per PSU: 238,000;
ACXC48F32: Chassis: 87,250;
Per fan: 280,000 POH,
Per PSU: 238,000;
ACXC64: Chassis: 97,300;
Per fan: 280,000 POH,
Per PSU: 238,000;
ACXC64F: Chassis: 92,900;
Per fan: 280,000 POH,
Per PSU: 238,000;
ACXC48F16: Chassis: 95,600;
Per fan: 280,000 POH,
Per PSU: 238,000;
Page 20
724-746-5500 | blackbox.com
Chapter 1: Specifications
Specifications
MTBF (continued) ACXC48: Chassis: 140,000;
Per fan: 280,000 POH,
Per PSU: 295,700;
ACXC48F: Chassis: 133,400;
Per fan: 280,000 POH,
Per PSU: 295,700;
ACXC32: Chassis: 165,300;
Per fan: 280,000 POH,
Per PSU: 295,700;
ACXC32F: Chassis: 161,200;
Per fan: 280,000 POH,
Per PSU: 295,700;
ACXC16: Chassis: 208,322;
Per fan: 280,000 POH,
Per PSU: 295,700;
ACXC16F: Chassis: 206,100;
Per fan: 280,000 POH,
Per PSU: 295,700;
ACXC8,ACXC8F: Chassis: 684,700
Per fan: 280,000 POH,
Per PSU: 309,700
Page 21
724-746-5500 | blackbox.com
Chapter 2: Overview
2. Overview
2.1 Description
2.1.1 Ap plication
The ServSwitch DKM FX is used to establish connections from consoles (monitor,
keyboard, mouse, and other peripheral devices) to various sources (computer,
CPU). In a maximum configuration, up to 288 independent ports can be defined
and switched either as a console or a CPU.
The ServSwitch DKM FX Compact is used to establish connections from consoles
(monitor, keyboard, mouse, and other peripheral devices) to various sources
(computer, CPU). In a maximum configuration, up to 8 (using the ACXC8 or
ACXC8F), 16 (using the ACXC16), 32 (using the ACXC32), 48 (using the
ACXC48), 48 CATx ports/16 SFP slots (using the ACXC48F16), or 48 CATx
ports/32 SFP slots (using the ACXC48F32), 64 CATx (using the ACXC64), or 80
CATx (using the ACXC80) independent ports can be defined and switched either
as a console or a CPU.
The ServSwitch DKM FX or FXC is mainly specified for the use with extenders that
are able to transmit video, KVM, and USB 2.0 signals. You can also use it as a
video-only matrix.
For the connection between the ServSwitch DKM FX or FXC and the peripheral
devices, such as KVM extenders or video sources, you can use CATx, fiber, or
coaxial cables, depending on the hardware used.
The ServSwitch DKM FX serves as a repeater. You can place it up to 6.2 miles
(10 km) from the consoles and 6.2 miles (10 km) from the sources.
Page 22
724-746-5500 | blackbox.com
Chapter 2: Overview
2.1.2 Access Options
You have the following options to access the ServSwitch DKM FX for
configuration and operation:
Table 2-1. Access options.
Access option Symbol
OSD
Java tool
Serial interface
2.2 System Overview
A ServSwitch DKM FX system consists of a ServSwitch DKM FX or DKM FX
Compact and, for KVM applications, one or more CPU units/CON units. The
ServSwitch connects to the CPU units/CON units by interconnect cables (copper
or fiber) or is connected directly to the video devices when used as a video matrix.
The CPU units connect directly to the sources (computer, CPU), using the included
cables.
Monitor(s), keyboard, and mouse connect to the CON units.
The ServSwitch DKM FX and the CPU units/CON units communicate over CATx,
fiber, or coaxial interconnect cables. The ServSwitch DKM FX Compact and the
CPU units/CON units communicate over CATx or fiber cable.
Figure 2-1 shows the system overview. Table 2-2 describes its components.
Page 23
724-746-5500 | blackbox.com
Chapter 2: Overview
FILTER TOP
5V
DC
5V
DC
PROG LINK U SB DVI-D
5V
DC
5V
DC
PROG LINK U SB DVI-D
5V
DC
5V
DC
PROG LINK U SB DVI-D
5V
DC
5V
DC
PROG LINK U SB DVI-D
5V
DC
5V
DC
PROG LINK USB-HID DVI-D
5V
DC
5V
DC
PROG LINK USB-HID DVI-D
5V
DC
5V
DC
PROG LINK USB-HID DVI-D
5V
DC
5V
DC
PROG LINK USB-HID DVI-D
1 2 3 4 3 5 6
Figure 2-1. System overview.
Table 2-2. System components.
Number Component
1 Computer/Server or Video Source
2 CPU units (Transmiters)
3 Interconnect cable
4 ServSwitch DKM FX or FXC
5 CON units (Receivers)
6 User Station/Console
See Section 3.2 for installation examples.
Page 24
724-746-5500 | blackbox.com
Chapter 2: Overview
2.3 Available Products
Table 2-3. Available products.
Number Description
ServSwitch DKM FX
ACX048 ServSwitch DKM FX 48-port with control card and power supply
ACX080 ServSwitch DKM FX 80-port with control card and power supply
ACX160 ServSwitch DKM FX 160-port with control card and (2) power supplies
ACX288 ServSwitch DKM FX 288-port with control card and (2) power supplies
ServSwitch DKM FX Compact
ACXC8 ServSwitch DKM FX Compact 8-port, CATx
ACXC8F ServSwitch DKM FX Compact 8-port, SFP
ACXC16 ServSwitch DKM FX Compact 16-port, CATx
ACXC16F ServSwitch DKM FX Compact 16-port, 16 SFP slots
ACXC32 ServSwitch DKM FX Compact 32-port, CATx
ACXC32F ServSwitch DKM FX Compact 32-port, 32 SFP slots
ACXC4 8 ServSwitch DKM FX Compact 48-port, CATx
ACXC4 8F ServSwitch DKM FX Compact 48-port, 48 SFP slots
ACXC48F16 ServSwitch DKM FX Compact 48 CATX ports, 16 SFP slots
ACXC4 8F32 ServSwitch DKM FX Compact 48 CATx ports, 32 SFP slots
ACXC64 ServSwitch DKM FX Compact 64-port, CATx
ACXC64F ServSwitch DKM FX Compact 64-port, 64 SFP slots
ACXC80 ServSwitch DKM FX Compact 80-port, CATx
ACXC80F ServSwitch DKM FX Compact 80-port, 80 SFP slots
Accessories
ACX-JAV DKM FX Java Switch and Preset License
ACX-API DKM FX API License for external control, includes ACX-JAV
ACX-SYS DKM FX SNMP Switch and Syslog License
ACX-CAS DKM FX Cascade License
ACX-GSW Multi-Screen Control License
ACXIO8-C 8-port CATx input/output (I/O) module
ACXIO8-SM 8-port single-mode fiber input/output (I /O) module
ACXI08-HS 8-port single-mode fiber SFP input/output (I/O) module 3.125 Gbps
ACXI08-SDI 8-port single-mode SDI fiber input /output (I/O) module
ACXIO8-SFP 8-port single-mode fiber SFP input/output (I/O) module
Page 25
724-746-5500 | blackbox.com
Chapter 2: Overview
Table 2-3 (continued). Available products.
Number Description
Accessories (continued)
ACXI08-G G 8-port universal I/O module that can support third-party SFPs
ACX288-CTL ServSwitch DKM FX controller card
ACXSFPC CATx SFP module
ACXSFPS Single-mode fiber SFP module
ACXSFPHS Single-mode fiber SFP module 3.125 Gbps
ACX SDI-SM -T SDI fiber transmitter card
ACXSDI3G-SM-T HD-SDI/3G-SDI fiber transmitter card
ACXSDI-CX-T SDI CATx transmitter card
ACXSDI3G-CX-T HD-SDI/3G-SDI CATx transmitter card
ACXSDI-SM-R SDI fiber receiver card
ACXSDI3G-SM-R HD-SDI/3G-SDI fiber receiver card
ACXSDI-CX-R SDI CATx receiver card
ACX288-FAN Fan for the 160/288-port chassis
ACX080-FAN Fan for the 80 -port chassis
ACX048- FAN Fan for the 48-port chassis
ACX288-PS Power supply for ACX288
ACX160 - PS Power supply for ACX160
ACX080-PS Power supply for ACX048 and ACX080
ACX288-FIL Spare Filter Module
ACX080-FIL
Spare Filter Module
ACX048-FIL Spare Filter Module
ACX288-BLKP-1S DKM FX 48 /80 /160/288 blank plate, 1-slot
ACX288-BLKP-2S DKM FX 48 /80 /160/289 blank plate, 2-slots
ACX288-BLKP-4S DKM FX 48 /80 /160/290 blank plate, 4-slots
ACX288-BLKP-8S DKM FX 48 /80 /160/291 blank plate, 8-slots
Page 26
724-746-5500 | blackbox.com
Chapter 2: Overview
2.4 What’s Included
Your package should contain the following items. If anything is missing
or damaged, contact Black Box Technical Support at 724-746-5500
or info@blackbox.com.
ACX048, ACX080, ACX160, ACX288, ACXC8, ACXC8F, ACXC16, ACXC16F,
ACXC32, ACXC32F, ACXC48, ACXC48F, ACXC48F16, ACXC48F32, ACXC64,
ACXC64F, ACXC80, ACXC80F:
• DKM FX or DKM FX Compact matrix
• (1) power cord per built-in power supply unit
• (1) serial control cable (DKM FXC includes a DB9 to RJ-45 adapter)
• Mounting accessories
• Quick Install Guide
• (1) CATx network cable (cross-wired)
Page 27
724-746-5500 | blackbox.com
Chapter 2: Overview
2.5 Device Views
In Sections 2.5.1 through 2.5.4, Figures 2-2 through 2-5 illustrate the ServSwitch
DKM FX chassis models. Tables 2-4 through 2-7 describe their components.
NOTE: The following images of the chassis are fully populated with I/O cards and
are intended to be example diagrams. The chassis do not come with any
I/O cards. You need to purchase the I/O cards separately.
2.5.1 ServSwitch DKM FX 48-Port (ACX048)
1 2 3 4 5 6 7
Figure 2-2. Front view, ACX048.
Table 2-4. ACX048 components.
Number Component
1 Slot for fan tray
2 Slot for Power Supply Unit 1
3 Slot for I /O Boards 1–6
4 Slot for Power Supply Unit 2
5 Slot for CPU board
6 Slot for air filter
7 Slot for Fan Tray 2
Page 28
724-746-5500 | blackbox.com
Chapter 2: Overview
2.5.2 ServSwitch DKM FX 80-Port (ACX080)
1 2 3 4 5 6 7
Figure 2-3. Front view, ACX080.
Table 2-5. ACX080 components.
Number Component
1 Slot for fan tray
2 Slot for Power Supply Unit 1
3 Slot for I /O Boards 1–10
4 Slot for Power Supply Unit 2
5 Slot for CPU board
6 Slot for air filter
7 Slot for Fan Tray 2
Page 29
724-746-5500 | blackbox.com
Chapter 2: Overview
2.5.3 ServSwitch DKM FX 160-Port (ACX160)
1 2 3 4 5 6 8 7
Figure 2-4. Front view, ACX160.
Table 2-6. ACX160 components.
Number Component
1 Slot for Power Supply Unit 1
2 Slot for Fan Tray 1
3 Slot for Power Supply Unit 2
4 Slot for Fan Tray 2
5 Slot for I /O Boards 1–36
6 Slot for Power Supply Unit 3
7 Slot for CPU board
8 Grounding
Page 30
724-746-5500 | blackbox.com
Chapter 2: Overview
2.5.4 ServSwitch DKM FX 288-Port (ACX288)
1 2 3 4 5 6 7 8
Figure 2-5. Front view, ACX288.
Loading...