Black Box ACX1M-CS, ACX1M-SS, ACX1M-2C2S, ACX1M-2S2S User Manual
USER MANUAL
ACX1M-CC S E RI ES
DKM SERIES
(CROSS)
REPEATERS
24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM
PROG
X
Link 1
PROG
B
Link 2
X
X
A
Link 1
X
Link 2
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
TABLE OF CONTENTS
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
SAFETY INSTRUCTIONS .................................................................................................................................................................. 4
Installation ...................................................................................................................................................................................................... 4
Repair ...............................................................................................................................................................................................................4
1. SPECIFICATIONS ........................................................................................................................................................................... 5
1.1 In te r faces .................................................................................................................................................................................................. 5
1.1.1 R J -4 5 (Inte r c onnect) ..........................................................................................................................................................................................5
1.1.2 Fiber SFP Type LC (Interconnect) ....................................................................................................................................................................5
1.2 Interconnect Cable ................................................................................................................................................................................... 5
1.2 .1 C ATx .......................................................................................................................................................................................................................5
1.2.2 Fiber ......................................................................................................................................................................................................................6
1.3 Connector Pinouts ...................................................................................................................................................................................7
1.4 Power Supply ............................................................................................................................................................................................ 8
1.5 Environmental Conditions .......................................................................................................................................................................8
1.6 Dimensions ............................................................................................................................................................................................... 9
1.7 Shipping Weight ...................................................................................................................................................................................... 10
2. DESCRIPTION .............................................................................................................................................................................. 11
2.1 Application .............................................................................................................................................................................................. 11
2.2 System Overview .................................................................................................................................................................................... 11
2.3 Product Range ........................................................................................................................................................................................ 12
2.3.1 Chassis ...............................................................................................................................................................................................................12
2.3.2 (Cross) Repeater Modules ..............................................................................................................................................................................12
2.4 Accessories Upgrade Kits ..................................................................................................................................................................... 13
2.5 Device Views ...........................................................................................................................................................................................14
2.5.1 2-Slot Chassis with One External Power Supply Unit (ACXMODH2-R2) ........................................................................................... 14
2.5.2 2-Slot Chassis with One External Power Supply Unit and Redundant Power Option (ACXMODH2R-R2) ................................. 15
2.5.3 2-Slot Chassis with One Internal Power Supply Unit and Redundant Power Option (ACXMODH2R-P-R2) ............................... 16
2.5.4 4-Slot Chassis with One External Power Supply Unit (ACXMODH4-R2) ........................................................................................... 17
2.5.5 4-Slot Chassis with One External Power Supply Unit and Redundant Power Option (ACXMODH4R-R2) ................................. 18
2.5.6 6-Slot Chassis with One Internal Power Supply and Redundant Power Option (ACXMODH6R-R2) ........................................... 19
2.5.7 6 -Slot Chassis with Active Backplane and Two Internal Power Supplies (ACXMODH6BPAC-R2) .............................................20
2.5.8 6-Slot Chassis with Active Backplane and Two Internal Power Supplies and Connectors
on the Back Side (ACXMOD6FPAC-R2) ...................................................................................................................................................21
2.5.9 21-Slot Chassis with One Internal Power Supply and Redundant Power Option (ACXMODH21R)..............................................22
2.5.10 CATx Repeater Module (ACX1M-CC) .........................................................................................................................................................23
2.5.11 Single-Mode Fiber Repeater Module (ACX1M-SS) .................................................................................................................................23
2.5.12 CATx/Single-Mode Fiber Repeater Module (ACX1M-CS) ..................................................................................................................... 24
2.5.13 CATx Dual Repeater Module (ACX1M-2C2C) ...........................................................................................................................................24
2.5.14 Single-Mode Fiber Dual Repeater Module (ACX1M-2S2S) ...................................................................................................................25
2.5.15 CATx/Single-Mode Fiber Dual Repeater Module (ACX1M-2C2S) .......................................................................................................25
2.6 Status LEDs ............................................................................................................................................................................................26
2.6.1 Status (Cross) Repeater Module ................................................................................................................................................................... 26
2
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
CHAPTER 1: HEADLINE
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
3. INSTALLATION ............................................................................................................................................................................ 27
3.1 Package Contents ..................................................................................................................................................................................27
3.2 System Installation ................................................................................................................................................................................27
3.2.1 (Cross) Repeater Setup ...................................................................................................................................................................................27
3.3 Example Applications ............................................................................................................................................................................28
3.4 Configuration ..........................................................................................................................................................................................29
3.5 Operation ................................................................................................................................................................................................29
4. TROUBLESHOOTING ................................................................................................................................................................... 30
5. CONTACTING BLACK BOX TECHNICAL SUPPORT .................................................................................................................. 31
51 Support Checklist ....................................................................................................................................................................................31
5.2 Shipping Checklist .................................................................................................................................................................................31
APPENDIX A. REGULATORY INFORMATION ................................................................................................................................ 32
A.1 CE Declaration of Conformity ...............................................................................................................................................................32
A.2 FCC Statement ....................................................................................................................................................................................... 32
A.3 Product Safety .......................................................................................................................................................................................32
A.4 WEEE .......................................................................................................................................................................................................32
A.5 RoHS/RoHS2 ..........................................................................................................................................................................................33
A.6 NOM Statement .....................................................................................................................................................................................33
APPENDIX B. GLOSSARY ............................................................................................................................................................... 34
APPENDIX C. DISCLAIMER/TRADEMARKS ................................................................................................................................. 36
C.1 Disclaimer ............................................................................................................................................................................................... 36
C.2 Trademarks Used in this Manual .......................................................................................................................................................... 36
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
3
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
SAFETY INSTRUCTIONS
To ensure reliable and safe long-term operation of your Repeater please note the following guidelines.
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
INSTALLATION
Only use in dry, indoor environments.
The Repeater and the power supply units can get warm. Do not install components in an enclosed space without any airflow.
Do not place the power supply directly on top of the device.
Do not obscure ventilation holes.
Only use power supplies originally supplied with the product or manufacturer-approved replacements. Do not use a power supply if
it appears to be defective or has a damaged chassis.
Connect all power supplies to grounded outlets. In each case, ensure that the ground connection is maintained from the outlet
socket through to the power supply’s AC power input.
Do not connect the link interface to any other equipment, particularly network or telecommunications equipment.
Take any required ESD precautions.
NOTE: To disconnect the device completely from the electric circuit, all power cables have to be removed.
REPAIR
Do not attempt to open or repair a power supply unit.
Do not attempt to open or repair the Repeater. There are no user serviceable parts inside.
Please contact Black Box Technical Support at 877-877-2269 or info@blackbox.com if there is a fault.
4
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
CHAPTER 1: SPECIFICATIONS
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
1.1 INTERFAC ES
1.1.1 RJ-45 (INTERCONNECT)
For CATx communications, the repeater requires a 1000BASE-T connection.
Connector wiring must comply with EIA/TIA-568-B (1000BASE-T), with RJ-45 connectors at both ends. All four cable wire pairs
are used.
1.1.2 FIBER SFP TYPE LC (INTERCONNECT)
The communication of fiber devices is performed via Gigabit SFPs that have to be connected to suitable fibers fitted with type LC
connectors.
NOTE: The correct function of the device can only be guaranteed with SFPs provided by Black Box.
CAUTION: SFP modules can be damaged by electrostatic discharge (ESD). When handling, take care not to damage devices.
1.2 INTERCONNECT CABLE
1. 2.1 C AT X
NOTE: A point-to-point connection is required. Operation with several patch fields is possible. Routing over an active network component,
such as an Ethernet hub, router, or switch, is not allowed.
Avoid routing CATx cables along power cables.
If the site has 3-phase AC power, make sure that the CPU module and CON module are on the same phase.
CAUTION: To maintain regulatory EMC compliance, you must use correctly installed shielded CATx cable throughout the interconnection
link. Also, all CATx cables need to have ferrites on both cable ends close to the device.
TYPE OF INTERCONNECT CABLE
The (Cross) Repeater requires interconnect cabling specified for Gigabit Ethernet (1000BASE-T). The use of solid-core (24 AWG), shielded,
CAT5e (or better) is recommended.
TABLE 1-1. CATX INTERCONNECT CABLE
CABLE TYPE DESCRIPTION
CATx solid-core cable 24 AWG
CATx patch cable 26/8 AWG
S/UTP (CAT5e) cable according to EIA/TIA-568-B. Four pairs of 24 AWG wires. Connection according
to EIA/TIA-568-B (1000BASE-T).
S/UTP (CAT5e) cable according to EIA/TIA-568-B. Four pairs of 26/8 AWG wires. Connection according
to EIA/TIA-568-B (1000BASE-T).
NOTE: You can use flexible cables (patch cables) type 26/8 AWG; however, but you’ll only get half the maximum possible extension distance
(Table 1- 2).
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
5
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
CHAPTER 1: SPECIFICATIONS
TABLE 1-2. MAXIMUM ACCEPTABLE CATX CABLE LENGTH
CABLE TYPE MAXIMUM LENGTH
Solid-conductor 24 AWG CATx cable 400 feet (140 m)
Stranded-conductor 26/28 or 27/28 AWG or CATx cable 200 feet (70 m)
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
1.2.2 FIBER
NOTE: A point-to-point connection is necessary. Operation with multiple patch panels is allowed. Routing over active network components,
such as Ethernet hubs, switches, or routers, is not allowed.
TABLE 1-3. FIBER INTERCONNECT CABLE
CABLE TYPE DESCRIPTION
Single-mode fiber 9 µm
Multimode fiber 50 µm
Multimode fiber 62 µm
• Duplex.
• Indoor patch cable (EFN092)
• Duplex.
• Indoor patch cable (EFN6020)
• Duplex.
• Indoor patch cable (EFN116-LCLC)
TABLE 1-4. MAXIMUM ACCEPTABLE FIBER CABLE LENGTH
CABLE TYPE MAXIMUM LENGTH
Single-mode fiber 9 µm 32,800 feet (10,000 m)
Multimode fiber 50 µm (OM3) 3280 feet (1000 m)
Multimode fiber 50 µm 1300 feet (400 m)
Multimode fiber 62.5 µm 650 feet (200 m)
NOTE: If you use single-mode SFPs with multimode fibers, you can normally double the maximum acceptable cable length.
CONNECTOR TYPE
The ACX1M-CS, ACX1M-SS, ACX1M-2C2S, and ACX1M-2S2S have fiber LC connectors.
6
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
CHAPTER 1: SPECIFICATIONS
1.3 CONNECTOR PINOUTS
TABLE 1-5. MINI USB TYPE B CONNECTOR PINOUT
PICTURE PIN SIGNAL COLOR
1 VCC (+5 VDC) Red
2 Data - White
3 Data + Green
PICTURE PIN SIGNAL PIN SIGNAL
4 Not connected —
5 Ground Black
TABLE 1-6. RJ-45 CONNECTOR PINOUT
1 D1+ 5 D3-
2 D1- 6 D2-
3 D2+ 7 D4+
4 D3+ 8 D4-
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
TABLE 1-7. FIBER SFP TYPE LC CONNECTOR PINOUT
PICTURE PIN SIGNAL
Data OUT
1
Data IN
2
TABLE 1-8. CONNECTORS ON THE REPEATERS/CROSS REPEATERS
PART NUMBER CONNECTORS
ACX1M-CC (2) RJ-45 interconnect, (1) Mini USB (programming port)
ACX1M-SS (2) Fiber LC, (1) Mini USB (programming port)
ACX1M-CS (1) RJ-45, (1) Fiber LC, (1) Mini USB (programming port)
ACX1M-2C2C (4) RJ-45, (2) Mini USB (programming ports)
ACX1M-2S2S (4) Fiber LC, (2) Mini USB (programming ports);
ACX1M-2C2S (2) RJ-45, (2) Fiber LC, (2) Mini USB (programming ports)
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
7
CHAPTER 1: SPECIFICATIONS
1.4 POWER SUPPLY
TABLE 1-9. AC POWER SUPPLY
PART NUMBER MAX. CURRENT MAX. VO LTAGE FREQUENCY
ACXMODH2R-P-R2 700 mA max. 100 to 240 VAC 50/60 Hz
ACXMODH6R-R2 1400 mA max 100 to 240 VAC 47 to 63 Hz
ACXMODH6BPAC-R2 800 mA max. 100 to 240 VAC 50/60 Hz
ACXMODH6FPAC-R2 800 mA max. 100 to 240 VAC 50/60 Hz
ACXMODH21R 4000 mA max. (2) 100 to 240 VAC 50/60 Hz
TABLE 1-10. DC POWER SUPPLY
PART NUMBER MAX. CURRENT MAX. VO LTAGE FREQUENCY
ACXMODH2-R2 3000 mA max. 5 VDC 50/60 Hz
ACXMODH2R-R2 3000 mA max 5 VDC 47 to 63 Hz
ACXMODH2R-P-R2 5000 mA max. 5 VDC 50/60 Hz
ACXMODH4-R2 5000 mA max. 5 VDC 50/60 Hz
ACXMODH4R-R2 5000 mA max. 5 VDC 50/60 Hz
ACXMODH6R-R2 8000 mA max. 5 VDC 50/60 Hz
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
NOTE: The power requirement per (cross) repeater is 300 mA max.
1.5 ENVIRONMENTAL CONDITIONS
TABLE 1-11. ENVIRONMENTAL SPECIFICATIONS
SPECIFICATION DESCRIPTION
Operating Temperature 41 to 113° F (5 to 45°C)
Storage Temperature -13 to +140° F (-25 to +60° C)
Relative Humidity Max.80%, noncondensing
8
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
CHAPTER 1: SPECIFICATIONS
1.6 DIMENSIONS
TABLE 1-12. DKM FX MODULAR REPEATERS
ITEM DIMENSIONS
Repeater/Cross Repeater 1.7”H x 5.81”W x 5.75”D (4.3 x 14.8 x 14.6 cm)
TABLE 1-13. DEVICES IN THE 2-SLOT CHASSIS (ACXMODH2-R2)
ITEM DIMENSIONS
CPU Unit/CON Unit 1.7"H x 5.8" W x 5.7"D (4.1 x 14.7 x 14.5 cm)
Shipping Box 6.5"H x 5.5"W x 8.3"H (16.5 x 14 x 21 cm)
TABLE 1-14. DEVICES IN THE 2-SLOT CHASSIS (ACXMODH2R-R2, ACXMODH2R-P-R2)
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
ITEM DIMENSIONS
CPU Unit/CON Unit 1.7"H x 5.8" W x 8.3"D (4.1 x 14.7 x 22.1 cm)
Shipping Box 4.5"H x 14.4"W x 21.7"D (11.5 x 36.5 x 55 cm)
TABLE 1-15. DEVICES IN THE 4-SLOT CHASSIS (ACXMODH4-R2, ACXMODH4R-R2)
ITEM DIMENSIONS
CPU Unit/CON Unit 1.7"H x 5.8" W x 11.5"D (4.1 x 14.7 x 29.3 cm)
Shipping Box 4.5"H x 14.4"W x 21.7"D (11.5 x 36.5 x 55 cm)
TABLE 1-16. DEVICES IN THE 6-SLOT CHASSIS (ACXMODH6R-R2)
ITEM DIMENSIONS
CPU Unit/CON Unit 1.7"H x 5.8" W x 17.4"D (4.1 x 14.7 x 44.2 cm)
Shipping Box 4.5"H x 14.4"W x 29.9"D (11.5 x 36.5 x 76 cm)
TABLE 1-17. DEVICES IN THE 6-SLOT CHASSIS (ACXMODH6BPAC-R2, ACXMOD6FPAC-R2)
ITEM DIMENSIONS
CPU Unit/CON Unit 1.7"H x 9.8"W x 17.4"D (4.1 x 25 x 44.2 cm)
Shipping Box 6.1"H x 14.6"W x 21.7"D (15.5 x 37.2 x 55 cm)
TABLE 1-18. DEVICES IN THE 21-SLOT CHASSIS (ACXMODH21R)
ITEM DIMENSIONS
CPU Unit/CON Unit 6.9"H x 18.2"W x 19"D (17.6 x 46.2 x 48.2 cm)
Shipping Box 14.5"H x 22.6"W x 25.4"D (36.8 x 57.4 x 64.5 cm)
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
9
CHAPTER 1: SPECIFICATIONS
1.7 SHIPPING WEIGHT
TABLE 1-19. DKM FX MODULAR REPEATERS
ITEM DIMENSIONS
Repeater/Cross Repeater 0.6 lb. (0.3 kg)
Shipping Box 4.9 lb. (2.2 kg)
TABLE 1-20. DEVICES IN THE 2-SLOT CHASSIS (ACXMODH2-R2)
ITEM SHIPPING WEIGHT
CPU Unit/CON Unit 0.9 lb. (0.4 kg)
Shipping Box 4.9 lb. (2.2 kg)
TABLE 1-21. DEVICES IN THE 2-SLOT CHASSIS (ACXMODH2R-R2, ACXMODH2R-P-R2)
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
ITEM SHIPPING WEIGHT
CPU Unit/CON Unit 1.8 lb. (0.8 kg)
Shipping Box 5.7 lb. (2.6 kg)
TABLE 1-22. DEVICES IN THE 4-SLOT CHASSIS (ACXMODH4-R2, ACXMODH4R-R2)
ITEM SHIPPING WEIGHT
CPU Unit/CON Unit 2.0 lb. (0.9 kg)
Shipping Box 7.5 lb. (3.4 kg)
TABLE 1-23. DEVICES IN THE 6-SLOT CHASSIS (ACXMODH6R-R2)
ITEM SHIPPING WEIGHT
CPU Unit/CON Unit 3.1 lb. (1.4 kg)
Shipping Box 10.1 lb. (4.6 kg)
TABLE 1-24. DEVICES IN THE 6-SLOT CHASSIS (ACXMODH6BPAC-R2, ACXMOD6FPAC-R2)
ITEM SHIPPING WEIGHT
CPU Unit/CON Unit 5.5 lb. (2.5 kg)
Shipping Box 7.7 lb. (3.5 kg)
TABLE 1-25. DEVICES IN THE 21-SLOT CHASSIS (ACXMODH21R)
ITEM SHIPPING WEIGHT
CPU Unit/CON Unit 22.1 lb. (10.0 kg)
Shipping Box 32.0 lb. (14.5 kg)
10
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
CHAPTER 2: DESCRIPTION
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
2.1 APPLICATION
The (Cross) Repeater is used to double the maximum cabling distance between a KVM extender CON or CPU Unit or even a KVM
matrix. The device can also be used for media conversion from CATx to fiber or vice versa.
The device is available as a pure CATx or fiber version (repeater) and as a hybrid version of CATx and fiber (cross repeater) for an
additional electrical/optical signal conversion.
2.2 SYSTEM OVERVIEW
The (Cross) Repeater consists of at least one module depending on the application.
The device is connected between a KVM extender CON and CPU Unit via the interconnect cable or can be alternatively connected
between a KVM extender unit and a KVM matrix.
The (Cross) Repeater communicates with both the KVM extenders and a KVM-Matrix via the interconnect cables.
TABLE 2-1. SYSTEM COMPONENTS
NUMBER IN FIGURE 2-1 COMPONENT
1 Source (computer, CPU)
2 KVM Extender CPU Unit
3 Interconnect cable (CATx or fiber)
4 (Cross) Repeater
5 Interconnect cable (CATx or fiber)
6 KVM Extender CON Unit
7 Console (monitor, keyboard, mouse)
NOTE: See Chapter 3 for installation examples.
FIGURE 2-1. SYSTEM OVERVIEW
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
11
NEED HELP?
LEAV E THE TEC H TO US
LIVE 24/7
CHAPTER 2: DESCRIPTION
2.3 PRODUCT RANGE
TECHNICAL
SUPPORT
1. 8 7 7. 87 7. 2 269
2.3 .1 C H A S SI S
TABLE 2-2. AVAILABLE CHASSIS
PART NUMBER DESCRIPTION
ACXMODH2-R2 Empty chassis for up to 2 boards, 1 external power supply unit
ACXMODH2R-R2
ACXMODH2R-P-R2
ACXMODH4-R2 Empty chassis for up to 4 boards, 1 external power supply unit
ACXMODH4R-R2
ACXMODH6R-R2
ACXMODH6BPAC-R2 Empty chassis for up to 6 boards, active backplane, 2 internal power supplies (redundancy)
ACXMODH6FPAC-R2 Empty chassis for up to 6 boards, active backplane, 2 internal power supplies (redundancy) with connectors on rear side
ACXMODH21R
Empty chassis for up to 2 boards, 1 external power supply unit, preparation for redundancy for a second power supply
unit (external)
Empty chassis for up to 2 boards, 1 internal power supply unit, preparation for redundancy for a second power supply
unit (external)
Empty chassis for up to 4 boards, 1 external power supply unit, preparation for redundancy for a second power supply
unit (external)
Empty chassis for up to 6 boards, 1 internal power supply, preparation for redundancy for a second power supply unit
(external)
Empty chassis for up to 21 boards, 1 internal power supply unit, preparation for redundancy for a second power supply
unit (internal)
2.3.2 (CROSS) REPEATER MODULES
TABLE 2-3. AVAILABLE REPEATER MODULES
PART NUMBER DESCRIPTION
ACX1M-CC Repeater module CATx for range extension up to 896 ft. (280 m)
ACX1M-SS Repeater module fiber (Single-Mode) for range extension up to 12.4 mi. (20 km)
ACX1M-CS
ACX1M-2C2C Dual Repeater module CATx for range extension up to 896 ft. (280 m)
ACX1M-2S2S Dual Repeater module fiber (Single-Mode) for range extension up to 12.4 mi. (20 km)
ACX1M -2C2S
Cross Repeater module CATx/fiber (Single-Mode) for an electrical/optical media conversion, maximum extension
up to 6.3 mi. (10.14 km)
Dual Cross Repeater module CATx/fiber (Single-Mode) for an electrical/optical media conversion, maximum extension
up to 6.3 mi. (10.14 km)
12
1. 8 7 7. 8 7 7. 2 2 6 9 BL ACK BOX .COM
Loading...