6
KVM EXTENDER/SHARERS
2.1 General Overview
The Keyboard/Video/Mouse (KVM) Extender/Sharers let you either
control a computer from a remote keyboard, monitor, and mouse, or share
a computer between two users (not at the same time). In Shared Mode, local
or remote user control is exercised through a switch on the Host Module of
the Extender/Sharer, which is connected directly to the computer.
The KVM Extender/Sharers work with IBM®PC/XT™, AT®, or PS/2
®
computers and 100% compatibles. They support Video Graphics Array
(VGA) monitors and graphics, and are compatible with both powered and
nonpowered serial mice or any serial-interface device such as a trackball or
digitizer pad. They are transparent to application software, so remote displays
are updated immediately.
Your remote setup can be located up to 150 feet (45.7 m) away from the
computer. Of course, in order to share the computer between a local and
remote setup, an additional keyboard, monitor, and mouse (if the application
software requires one) must be purchased separately.
With the regular KVM Extender/Sharer, remote video is disabled when the
unit is switched to local operation and vice versa. With the KVM Extender/
Sharer Plus, video can be active at both sites, regardless of where the input is
coming from. And with the KVM Extender/Sharer Pro, not only can video
can be active at both sites, but you can switch control from site to site by
pressing any key on an inactive keyboard.
2.2 Important Features
• Can be used in Extension or Shared Mode—either operate your
computer solely from a Remote monitor, keyboard, and mouse, or
switch control back and forth between a Remote and a Local setup.
• Shared operation—your two sets of keyboard, monitor, and mouse can
be in different rooms, in different areas, or even on different floors, up
to 150 ft. (45.7 m) away.
• Remote lockout ability—prevents two users who are sharing a computer
from different locations from entering information at the same time.
• Transparent to all software and graphics—what you see on the local
monitor is what appears on the remote monitor.
2. Introduction