Transform your wired projector into a high-end
wireless projector.
Includes plug-and-show, 4-to-1 split screen, 1-to-4 screen projection,
and PDA wireless projection features.
AC 1132A
AC1132A
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: w ww.blackbox.com • E-mail : info@blackbox.com
724-746-5500 | blackbox.com
Trademarks Used in this Manual
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Mac and Macintosh are registered trademarks of Apple Computer, Inc.
Internet Explorer, PowerPoint, Windows, and Windows Vista are registered trademarks of Microsoft Corporation.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Page 2
We‘re here to help! If you have any questions about your application
or our products, contact Black Box Tech Support at 724-746-5500
or go to blackbox.com and click on “Talk to Black Box.”
You’ll be live with one of our technical experts in less than 30 seconds.
724-746-5500 | blackbox.com
AC1132A
FCC and IC RFI Statements
Federal Communications Commission and Industry Canada Radio Frequency Interference
Statements
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict
accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to
comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the Radio
Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de
la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.
AC1132A
724-746-5500 | blackbox.com
Page 3
724-746-5500 | blackbox.com
NOM Statement
Instrucciones de Seguridad
(Normas Oficiales Mexicanas Electrical Safety Statement)
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca
de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.
Todo otro servicio deberá ser referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico
sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes
que impidan el flujo de aire por los orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros
aparatos (incluyendo amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como
se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados
sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
2.2 Features ....................................................................................................................................................... 12
2.3 What’s Included .......................................................................................................................................... 13
3. Windows Client Utility ............................................................................................................................................... 15
3.1 Starting Program ......................................................................................................................................... 15
3.3 Main User Interface ..................................................................................................................................... 16
3.7 Menu Description ........................................................................................................................................ 20
3.7.1 Show Login Code ........................................................................................................................... 20
3.7.2 Open Admin Web Page ................................................................................................................. 21
3.7.3 Searching Server ............................................................................................................................. 21
3.7.11 R e pe a t ............................................................................................................................................28
3.7.12 Make Wireless Video Presentation System Token ...........................................................................28
3.7.13 Copy Application to Desktop.......................................................................................................... 30
3.7.14 About ............................................................................................................................................. 30
3.7.15 E xit .................................................................................................................................................31
4. Mac Client Utility .......................................................................................................................................................32
4.2 Main User Interface .....................................................................................................................................33
5. Web Management .....................................................................................................................................................37
5.1 Home Page .................................................................................................................................................. 37
5.3 Conference Control ..................................................................................................................................... 38
5.4 Login Web Admin .......................................................................................................................................40
5.4.1 System Status ......................................................................................................................... 40
5.4.8 Reboot System ............................................................................................................................................48
1. Connect the projector’s VGA cable to the AC1132A’s VGA connector and power up the projector.
Figure QS-1. Connect the AC1132A to the projector.
2. Power on the AC1132A box.
Quick Start Guide
When the projector shows the default menu on the screen as below, it indicates the AC1132A unit is ready.
Figure QS-2. Default menu.
3. Make sure your PC WLAN is enabled already, and connect your PC with the AC1132A unit.
4. Open your browser and it will redirect to the WPS home page automatically, or you can enter the IP address to access the
Wireless Video Presentation System’s Web home page.
AC1132A
724-746-5500 | blackbox.com
Page 7
724-746-5500 | blackbox.com
Quick Start Guide
The default IP address of the AC1132A is 192.168.100.10 or refer to the IP address shown on the left corner of projector screen.
Figure QS-3. Home page.
5. Download the client software (Figure QS-4). Then select the “Win7/Windows Vista/ XP/2000” or “Mac Utility“ and execute
the installation program (Figure QS-5).
After installing the program, you will see the Wireless Video Presentation System shortcut on the PC screen (Figure QS-5).
Page 8
Figure QS-4. Shortcut.
724-746-5500 | blackbox.com
AC1132A
Figure QS-5. Run or Save dialog box and WPS shortcut icon.
6. Make sure your personal firewall allows the AC1132A software to pass through.
7. Select projection devices (Figure QS-6).
Quick Start Guide
Figure QS-6. Selecting devices.
8. Enter the LOGIN CODE that is found on the projector screen (if required) (Figure QS-7).
Figure QS-7. Login code on projector screen.
AC1132A
724-746-5500 | blackbox.com
Page 9
724-746-5500 | blackbox.com
Quick Start Guide
9. Click the “Play” button to start projection (Figure QS-8).
Wireless Encryption — IEEE standard 64/128 bit WEP/WPA/WPA2-PSK
Wireless Frequency — 2.4 GHz
Wireless Range — Up to 328 ft.
Wireless Speed — 11 Mbps, 54 Mbps, 300 Mbps
Connectors — RJ-45 LAN, HD15 VGA, 3.5-mm Audio, (2) SMA
Power — Source: External;
Input Voltage: 100–240 V, 0.5 A, 50/60 Hz;
Secondary Power: 5 VDC, 2.6 A
Size — 4.6"H x 5.5"W x 1.06"D (11.7 x 14 x 2.7 cm)
Weight — 0.62 lb. (0.28 g)
AC1132A
724-746-5500 | blackbox.com
Page 11
724-746-5500 | blackbox.com
Chapter 2: Overview
2. Overview
2.1 Introduction
The Wireless Video Presentation System (AC1132A) turns your existing “wired” projector into a “high-end wireless” projector. The
unit’s plug-and-show wireless projection features provide efficient and successful presentation.
High-Performance Wireless Projection and Audio Projection
This high-performance wireless projection system with audio enables you to share a multimedia display with several users without
using cable.
Plug and Show
With the accompanying plug-and-show USB token, wireless presentation becomes easy. Just link your PC/laptop to the AC1132A
(through WLAN or Ethernet), plug the token into a USB port, and in seconds, your screen will project to the connected projector.
4-to-1 Split-Screen Projection
With this 4-to-1 split-screen feature, up to four PC screens can be projected to one projector in the same time. You can easily do
side-by-side comparison from four PC/PDAs.
1-to-4 Screen Projection
With 1-to-4 screen projection, you can project PC content out to up to four screens at the same time through AC1132A devices.
The 1-to-4 screen projection feature functions both under presentation mode and video mode.
Macintosh® (Mac) Wireless Projection
The Wireless Video Presentation System can connect to a Mac client. The Mac client software is stored in the accompanying USB
token. It enables wireless projection from a Mac.
HD Video Streaming
The AC1132A supports video streaming feature, so you can watch HD video on a big screen with original quality through wireless
streaming.
SNMP Manager
The AC1132A features SNMP management. Enable Simple Network Management Protocol (SNMP) protocol (Version 2c) to
manage and configure one or more devices through a network.
Changeable Splash Screen
You can use the application “Screen Image Background Maker” to change the Splash Screen. Design the image with the message
you would like to present, upload it through a Web control page, and you will have a customized starting page.
AP-Client Mode
You can enable the AP-Client Mode function to let the AC1132A join the existing access point through Wi-Fi. This feature
provides the flexibility of wireless network deployment in enterprise environment.
Remote Desktop
Plug a standard USB keyboard or mouse into the USB port on the front panel of the AC1132A device to control your PC remotely.
2.2 Features
• Supports Windows 7, Windows Vista, XP, 2000, and Mobile 5/6.
• Supports Macintosh® (Mac®) version 10.5 and above.
• Plug and Show. No installation required. Just plug the included token into a USB port, and start wireless projection in seconds.
• Features 4-to-1 split screen projection. One projector functions as four projectors.
Page 12
724-746-5500 | blackbox.com
AC1132A
Chapter 2: Overview
• Enables 1-to-4 screen projection. Project PC content to four screens for multicasting.
• Supports smartphone wireless projection.
• Provides session security login, wireless WEP/WPA key and gatekeeper function to protect presentation contents and keep them
secure.
• Supports music and video streaming via video playback.
• Includes audio.
• Supports H.264 HD video streaming.
• You can change the splash screen image.
• SNMP Manager enables you to manage the devices easily.
• AP-ClientMode enables you to easily deploy wireless in a network enterprise.
• Features remote desktop.
2.3 What’s Included
Your package should include the following items. If anything is missing or damaged, contact Black Box Technical Support at
724-746-5500 or info@blackbox.com.
• (1) Wireless Video Presentation System III unit
• (1) 5-VDC, 2.5-A wallmount power supply with U.S. adapter, UK adapter, EU adapter, and Australia adapter
• (2) antennas
• (1) mounting bracket for a wall
• (2) small mounting screws to mount the AC1132A to a bracket
• (4) large screws to mount the bracket to the wall
• (1) quick installation guide
• (1) USB flash drive/token containing software and this user’s manual
USB Token Contents
The USB token consists of the following software:
Client Folder:
• Software for Windows® and Mac® OS, MobiShow software for Windows Mobile 5/6
Applications Folder:
• VAC (for audio projection)
• VDD (for virtual extended screen)
• IB Maker (for changing startup screen)
• PtG Converter (for MobiShow PtG function)
• SNMP Manager (for Wireless Presentation System device management)
AC1132A
724-746-5500 | blackbox.com
Page 13
724-746-5500 | blackbox.com
Chapter 2: Overview
2.4 Hardware Description
Figures 2-1 and 2-2 show the front panel of the AC1132A. Table 2-1 describes its components.
1 2
Figure 2-1. Front panel.
3 4 5 6 7 8 3
Figure 2-2. Back panel.
Table 2-1. Wireless Presentation System III components.
NumberComponentDescription
1USB connectorConnects to mouse and/or keyboard
2Power LEDLights when power to the unit is on
3Antenna portConnects to antenna
45-VDC power connectorLinks to power
5VGA connectorConnects to projector input
6Audio connectorAttaches to audio
7RJ- 45 portLinks to L AN
8Reset buttonPress to reset the unit
Page 14
724-746-5500 | blackbox.com
AC1132A
Chapter 3: Windows Client Utility
3. Windows Client Utility
3.1 Starting Program
After you download the Wireless Video Presentation System Windows program via the Web page successfully, follow the steps
below.
1. Click on the Wireless Video Presentation System icon to execute the program (Figure 3-1).
Figure 3-1. Wireless Video Presentation System icon.
2. The program starts to search for AC1132A box automatically.
3. When it finds the Wireless Video Presentation System box, a “Login Code” dialog box pops up on the PC screen (Figure 3-3).
Figure 3-2. Searching for Wireless Video Presentation System box.
AC1132A
Figure 3-3. Enter login code screen.
724-746-5500 | blackbox.com
Page 15
724-746-5500 | blackbox.com
Chapter 3: Windows Client Utility
3.2 Login
When the “Login Code” dialog box appears, enter the login code to start your presentation (Figure 3-4). The login code appears
on the projector screen.
3.3 Main User Interface
Figures 3-5 and 3-6 show the main user interface.
Screen
Projection Tab
Streaming Tab
Select device
Figure 3-4. Login screen.
Menu Area
Control Area for
Screen Projection
Feature
Status Indicator
Figure 3-5. Start projection.
Page 16
724-746-5500 | blackbox.com
AC1132A
Chapter 3: Windows Client Utility
Control Area for
Streaming Feature
Figure 3-6. Control area for streaming feature.
3.4 Screen Projection
Click on the “Play” button for full or split screen to project the main screen on to the display immediately (Figure 3-7). Click on
the “Pause” button to freeze the projection screen. Click on the “Stop” button to stop projecting your screen.
NOTE: To enable audio projection, you must install the provided audio driver and set the projection quality to “Normal.”
Figure 3-7. Buttons on the unit.
AC1132A
724-746-5500 | blackbox.com
Page 17
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.