Page 1
Add multiple DVI displays to your PC.
USB–DVI/VGA Adapter Quick Start Guide
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
AC1039A-R3
1. Installing the Driver
CAUTION: DO NOT connect the adapter to your computer before installing
the provided driver.
Insert the provided CD into your disc drive and the installer program will run
automatically when the Driver CD is inserted. Then follow the on-screen
prompts to complete the installation.
Page 2
Page 2
724-746-5500 | blackbox.com
USB-DVI/VGA Adapter Quick Start Guide
For Windows Vista® users:
• Click on “Run Setup.exe” to execute the installer program.
• If you encounter a User Account Control dialog box when attempting
to install a program, enter an administrator password or click “Allow”
to start the installation.
• When prompted to restart your computer, click “Yes.”
NOTE: A reboot is always needed for a successful installation. If the reboot
prompt doesn’t appear, make sure to manually reboot your computer.
For Windows® 2000/XP users:
• If prompted for system patch after running the setup le, download and
install the required patch rst. After that, execute the setup le again to install
the driver.
2. Making the Connection
Connect the smaller end of the USB cable to the adapter. Then connect the
other end of the USB cable to a USB 2.0 port on your computer. If your monitor
is not yet connected to the adapter, make the connection and power on your
monitor. After the connection, Windows will automatically complete the
installation. On Windows Vista, if the add-on monitor is blank, reboot your
system again.
NOTE: Before the installation is complete, it’s normal that the screen flickers
black a couple of times.
Page 3
Page 3
724-746-5500 | blackbox.com
USB-DVI/VGA Adapter Quick Start Guide
3. Changing the Display Mode
There are several ways you can use the monitor attached on the adapter. The
add-on monitor can be congured to use either “mirror mode” or “extended
mode” (extend your Windows desktop to the add-on monitor).
Click on the “DisplayLink Device” icon to control the display adapter and select
to congure Display Properties as shown in Figure 1.
(The above string depends on each display adapter.)
Figure 1. Change the display mode.
This Quick Installation Guide describes only the basic installation instructions.
For more information, please refer to the User’s Manual on the provided
CD-ROM.
Page 4
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
© Copyright 2011. Black Box Corporation. All rights reserved. Black Box® and the Double Diamond
logo are registered trademarks of BB Technologies, Inc. Windows® and Windows Vista® are
registered trademarks of Microsoft Corporation. Any third-party trademarks appearing in this guide
are acknowledged to be the property of their respective owners.
4. Specifications
Color — 16- and 32-bit
Modes — Mirrored desktop, extended desktop, primary display
Operating Systems — Windows 2000, XP, 7; Windows Vista
Resolution — All resolutions up to 1920 x 1080
Video Modes — All VESA modes to 1080p excluding interlaced and reduced
blanking
CE Approval — Yes
RoHS — Yes
Connectors — (1) USB Mini B F, (1) DVI-I F, (1) DVI M to VGA HD15 F adapter
Power — Interface-powered from USB Type A port (5 V, 500 mA)
Size — 0.7"H x 2.2"W x 3.4"D (1.8 x 5.4 x 8.5 cm)
AC1039A-R3 Quick Start Guide, version 1
Loading...