Get organized now! Mount your equipment
in these preassembled cabinets.
Elite Series Data Cabinets and Accessories
© 2007. All rights reserved. Black Box Corporation.
FREE 24-hour Tech Support: 724-746-5500
blackbox.com
Get organized now! Mount your equipment
in these preassembled cabinets.
2 of 3
6/4/2007
#22017
724-746-5500 blackbox.com
FEATURES
• Preassembled—we do the work for you!
• Easily adapt to three different EIA rack
mounting standards: 19", 23", and 24".
• Pre-drilled bottom can accommodate
heavy-duty server shelf.
• Choose movable AC power strip with
6, 8, or 16 outlets.
• Order the optional exhaust fan panel to
get air circulation inside the cabinet.
• Available in blue, black, ivory, or gray.
OVERVIEW
Designed with all the features you want, the Elite Series
Data Cabinet from Black Box requires no assembly.
Removable side panels install flush—with no handles or
knobs to break. Vents on the top front and rear door aid air
circulation and help reduce excess heat and humidity.
The cabinet fits into most space-saving arrangements,
whether you want the cabinet’s door to swing left or right.
The spring-loaded hinges can be easily reversed for right or
left hanging.
The cabinet accommodates a wide range of equipment
sizes. Adjustable front-to-rear rails can be moved to EIA 19",
23", or 24" rackmounting and are marked every 3U for ease
of installation.
10-32 rails are standard; however, an M6 version of the
cabinet is also available and separate M6 Mounting Rails are
available for 78" and 84" cabinets. The rails, supported top
to bottom, don’t require side brackets. Because the sides and
corners of the cabinet are open, cable management is easier.
Cable management is easy. A cover plate below the rear
door can be removed to reveal a convenient opening for
cable entry (or additional air flow). Grommeted bottom edges
help prevent accidental damage to your cables.
All cabinet models include a movable AC power strip,
which can be mounted in any of the four corners and moved
up and down to suit your needs. Choose a cabinet with 6, 8,
or 16 outlets. If you need additional outlets, you can add extra
power strips at any of the cabinet’s corners.
You can also replace the standard louvered top panel
with an optional solid top, or you can order an optional top
panel containing three or six powerful exhaust fans. With the
help of six fans, you can direct air out the top of your cabinet
at a rate of 450 cubic feet per minute. That’s at least twice the
rate of most other cabinets. The fans refresh the cabinet’s
interior about every four seconds, giving you unparalleled
protection against heat buildup near your equipment.
Shelves.
Use the Fixed, Vented Server Shelf in a four-point pattern
anywhere in your cabinet. Available in three depths and for
either 19" or 23" rails, the shelf can hold up to 150 or 200
pounds of weight, depending on the model you order. This
shelf features mounting ears and adjustable side rails that
ensure a perfect cabinet fit.
The Heavy-Duty Solid Shelf, which has a weight capacity of
300 pounds, can be used to mount servers or other equipment
anywhere in your cabinet.
In addition to mounting ears and lips on its sides, this 3Uhigh shelf has 2" flanges on its front and back and 1" flanges
on its sides. You can mount the shelf with its flanges facing up
or down.
For the bottom of your Elite Series Data Cabinet, you can
order our Sliding Server Shelf, which can hold servers that
weigh up to 120 pounds.
If you’re looking for more organization from your cabinet,
then order the Sliding Server Shelf with Fins. Use it to
separate smaller components into two or three compartments. The shelf comes with four adjustable fins and a cable
management bar.
You can use a single center fin to create two 8.54" wide
compartments in the shelf. Or you can use two center fins to
create three compartments. The fins, along with the cable
management bar, can be removed if you want to use the shelf
to store even larger items.
The sliding shelf, which can be used anywhere in your Elite
Cabinet, mounts to all four upright rails. It supports up to
110 pounds of weight.
We also offer a Rackmount, Vented, 4-Point Shelf that’s
ideal for harsh environments where ventilation is required.
Available in both fixed and sliding models for 19" and 23"
rails, the 24" deep shelf supports up to 50 pounds of
equipment. The included brackets adjust from 20" to 29".
Vertical Cable Managers.
For maximum organization of cables leading to equipment
stored in your Elite Cabinet, order a Vertical Cable Manager.
Available in three heights, this rugged, steel unit features
a 2.35" wide by 3.5" deep swing-out cover for your cable
bundles as well as clip-on cable retainer rings and receptacles.
Designed to be attached to the outside of the Elite
Cabinet’s vertical mounting rail, the Vertical Cable Manager
can be used on the cabinet’s left or right side to route cables
neatly along the rail.
TECH SPECS
Frame — 16-gauge steel
Size —
525056–525059: 30"H x 29"W x 30"D (76.2 x 73.7 x 76.2 cm);
525060–525063: 48"H x 29"W x 30"D (121.9 x 73.7 x 76.2 cm);
525066–525069: 60"H x 29"W x 30"D (152.4 x 73.7 x 76.2 cm);
525070–525073: 72"H x 29"W x 30"D (182.9 x 73.7 x 76.2 cm);
525074–525077: 78"H x 29"W x 30"D (198.1 x 73.7 x 76.2 cm);
525078–525081: 84"H x 29"W x 30"D (213.4 x 73.7 x 76.2 cm);
536000–536003: 84"H x 29"W x 36"D (213.4 x 73.7 x 91.4 cm)
Weight —
525056–525059: 100 lb. (45.4 kg);
525060–525063: 125 lb. (56.7 kg);
525066–525069: 150 lb. (68 kg);
525070–525073: 200 lb. (90.7 kg);
525074–525077: 250 lb. (113.4 kg);
525078–525081: 350 lb. (158.8 kg);
536000–536003: 373 lb. (169.2 kg)
3 of 3
6/4/2007
#22017
724-746-5500 blackbox.com
Item Blue Black Ivory Gray
Elite Series Data Cabinets (10-32 Rails Unless Noted)
48" (121.9-cm) Cabinet with 8-Outlet Power Strip 525060 525061 525062 525063
60" (152.4-cm) Cabinet with 8-Outlet Power Strip 525066 525067 525068 525069
30" (76.2-cm) Cabinet with 6-Outlet Power Strip 525056 525057 525059 525058
72"H x 30"D (182.9 x 76.2 cm) Cabinet with 16-Outlet Power Strip
with Louvered Top Panel 525070 525071 525072 525073
with M6 Rails and 3-Fan Top Panel 525070-3F-M6 525071-3F-M6 525072-3F-M6 525073-3F-M6
with 3-Fan Top Panel 525070-3F 525071-3F 525072-3F 525073-3F
with 6-Fan Top Panel 525070-6F 515071-6F 525072-6F 525073-6F
with Solid Top Panel 525070-ST 525071-ST 525072-ST 525073-ST
78"H x 30"D (198.1 x 76.2 cm) Cabinet with 16-Outlet Power Strip
with Louvered Top Panel 525074 525075 525076 525077
with M6 Rails and 3-Fan Top Panel 525074-3F-M6 525075-3F-M6 525076-3F-M6 525077-3F-M6
with 3-Fan Top Panel 525074-3F 525075-3F 525076-3F 525077-3F
with 6-Fan Top Panel — 525075-6F 525076-6F 525077-6F
with Solid Top Panel 525074-ST 525075-ST 525076-ST 525077-ST
84"H x 30"D (213.4 x 76.2 cm) Cabinet with 16-Outlet Power Strip
with Louvered Top Panel 525078 525079 525080 525081
with M6 Rails and 3-Fan Top Panel 525078-3F-M6 525079-3F-M6 525080-3F-M6 525081-3F-M6
with 3-Fan Top Panel 525078-3F 525079-3F 525080-3F 525081-3F
with 6-Fan Top Panel 525078-6F 525079-6F 525080-6F 525081-6F
with Solid Top Panel 525078-ST 525079-ST 525080-ST 525081-ST
84"H x 36"D (213.4 x 91.4 cm) Cabinet with 16-Outlet Power Strip
with Louvered Top Panel 536000 536001 536002 536003
with M6 Rails and 3-Fan Top Panel 536000-3F-M6 536001-3F-M6 536002-3F-M6 536003-3F-M6
with 3-Fan Top Panel 536000-3F 536001-3F 536002-3F 536003-3F
with 6-Fan Top Panel 536000-6F 536001-6F 536002-6F 536003-6F
with Solid Top Panel 536000-ST 536001-ST 536002-ST —
Panel Accessories
Solid Top Panel 39964 39965 39966 39967
Top Panel with (3) Exhaust Fans 525094 525097 525096 525095
Top Panel with (6) Exhaust Fans 525098 525101 525100 525099
RM399
RM590
36049
Item Code
Other Accessories
Sliding Server Shelf 39970
Multicabinet Joining Kit (for Multiple Elite Units) 40169
Fixed, Vented Server Shelf,
for 19" (48.3-cm) Rails,
17.5"W x 221⁄4"D (44.5 x 56.5 cm), 200 lb. (90.7 kg)* RM399
17.5"W x 271⁄4"D (44.5 x 69.2 cm), 150 lb. (68 kg)* RM403
17.5"W x 30"D (44.5 x 76.2 cm), 150 lb. (68 kg)* RM410
for 23" (58.4-cm) Rails,
21.5"W x 221⁄4"D (54.6 x 56.5 cm), 200 lb. (90.7 kg)* RM589
Heavy-Duty Solid Shelf for 19" (48.3-cm) Rails,
17"W x 203⁄4"D (43.2 x 52.7 cm), 300 lb. (136.1 kg)* RM590
Heavy-Duty Solid Shelf for for 23" (58.4-cm) Rails,
21"W x 203⁄4"D (53.3 x 52.7 cm), 300 lb. (136.1 kg)* RM591
Sliding Server Shelf, 17.5"W x 22"D (44.5 x 55.9 cm),
120 lb. (54.4 kg)* 39970
Sliding Server Shelf with Fins for 19" (48.3-cm) Rails,
17"W x 26"D (43.2 x 66 cm), 110 lb. (49.9 kg)* RM400
Item Code
Other Accessories
Rackmount Sliding, Vented, 4-Point Shelf
for 19" (48.3-cm) Rails, 19"W x 24"D (48.3 x 61 cm),
50 lb. (22.7 kg)*, Sliding 36049
Fixed 36048
for 23" (58.4-cm) Rails, 23"W x 25"D (58.4 x 63.5 cm)
50 lb. (22.7 kg)*, Sliding 36051
Fixed 36050
Additional Set of 19" (48.3-cm) Mounting Rails RM404
M6 Mounting Rails (Set of 2)
for 78"H (198.1-cm) Cabinet RM406
for 84"H (213.4-cm) Cabinet RM407
Vertical Cable Managers
72"H (182.9 cm) RM035
78"H (198.1 cm) RM036
84"H (213.4 cm) RM037
* Maximum weight capacity.
Loading...