BKI FH-28WM Installation Manual

Ventless Hood System
MODEL FH-28WM WALL-MOUNT Operation & Installation
Serial Numbers 120646 and Higher
WHAT IS
WHO IS
COVERED
COVERAGE PERIOD
WARRANTY
EXCEPTIONS
EXCLUSIONS
INSTALLATION
REPLACEMENT PARTS
COVERED
COVERAGE
BKI LIMITED
PO Box
963-3471 • Toll
(864)
This warranty covers defects in material and workmanship under normal use, and applies only to the original purchaser providing that:
The equipment has not been accidentally or intentionally damaged, altered or misused;
The equipment is properly installed, adjusted, operated and maintained in accordance with national and local
codes, and in accordance with the installation and operating instructions provided with this product.
The serial number rating plate affixed to the equipment has not been defaced or removed.
This
warranty
is
in the U.S.A.
extended
80400 • Simpsonville, SC
Free: (800)
to the original
purchaser
29680-0400 • USA
927-6887 • Fax: (864) 963-5316
and applies only to
equipment purchased
 Warranty claims must be received in writing by BKI within one (1) year from date of installation or
within one (1) year and three (3) months from data of shipment from the factory, whichever comes
first.
 COB Models: One (1) Year limited parts and labor.
COM Models: Two (2) Year limited parts and labor. COM convection ovens also have a two (2) year door
warranty.
 CO1 Models: Two (2) Year limited parts and labor. Five (5) Year limited door warranty.
BevLes Products: Two (2) Year limited parts and labor.
 Warranty period begins the date of dealer invoice to customer or ninety (90) days after shipment date
from BKI, whichever comes first.
This
warranty authorized performed during regular, weekday business hours.
Any exceptions must be pre-approved in advance and in writing by BKI. The extended door warranty on convection ovens years 3 through 5 is a parts only warranty and does not include labor, travel, mileage or any other charges.
covers on-site labor, parts and
service
representative
reasonable
up to (100) miles
round
travel
trip and (2)
time
and travel
hours
expenses
travel time and
 Negligence
 Thermostat calibrations
Air and gas
Light
Glass doors and
Fuses,
Adjustments
Tightening
Failures
Unauthorized
Damage
Alteration,
Thermostats
Freight
Ordinary
Failure to follow
Events
Leveling, as well as installation
BKI genuine installation
Warranty
is in lieu of all
manufacturer’s
on the damages,
or in any
replacement
warranty.
of this
or acts of
God,
after (30) days
adjustments,
bulbs,
to
of screws or
caused
repair by
in
shipment,
misuse or
and safety valves with
– other than normal UPS charges,
wear and
beyond control
proper installation
and use materials – is the responsibility of the
Factory OEM parts receive a (90) day
by a BKI F
actory Authorized
part. BKI shall in no
event
of
proven defective
door adjustments,
burner
flames and
fasteners,
by erratic
voltages
anyone other than
improper installation,
tear,
installation and/or operating instructions,
of the
other warranties, expressed
for
damages
parts shall
from equipment installation date,
cleaning of
or gas
suppliers,
a BKI F
broken
capillary tubes,
company.
and check out of all
Service
in excess of the
materials warranty
Center.
event
be liable for any
constitute a
or implied, and all
pilot
burners,
actory Authorized
new equipment -
dealer
or installer, not the
effective from the date of
other obligations
purchase
special, indirect
price of the unit. The repair or
fulfillment of all
Service Center,
per
appropriate
obligations under
of the
manufacturer.
or liabilities
or
consequential
the terms
for use
Asia  Europe  Latin America  North America
Ventless Hood System Table of Contents
Table of Contents
Table of Contents........................................................................................................................................1
Introduction .................................................................................................................................................2
Safety Precautions....................................................................................................................................2
Safety Signs and Messages.................................................................................................................2
Specific Precautions.............................................................................................................................3
Safe Work Practices.............................................................................................................................3
Approvals Information..............................................................................................................................5
Fusible Links.........................................................................................................................................5
Pressure/Open Fryers..........................................................................................................................5
Sandwich Grills.....................................................................................................................................5
Fryers Specifications............................................................................................................................6
Griddles Specifications.........................................................................................................................6
Safety Labels............................................................................................................................................7
Installation ...................................................................................................................................................8
Unpacking and Handling...........................................................................................................................8
Inspection for Shipping Damage..........................................................................................................8
Location and Clearance .......................................................................................................................8
Assembly and Mounting ...........................................................................................................................8
Air Deflector..........................................................................................................................................8
Fire Damper..........................................................................................................................................9
Particle/Odor Filter................................................................................................................................9
Restraining Device ...............................................................................................................................9
Fire Extinguishing System..................................................................................................................10
Wiring......................................................................................................................................................11
Standard Electrical Connection..........................................................................................................11
Appliance Electrical Connection.........................................................................................................12
Operation ...................................................................................................................................................13
Principle of Operation.............................................................................................................................13
Preparation .............................................................................................................................................13
Start-Up...................................................................................................................................................13
Shut-Down..............................................................................................................................................13
When to Replace the Filter.....................................................................................................................14
Cleaning..................................................................................................................................................14
Maintenance ..............................................................................................................................................15
Scheduled Maintenance.........................................................................................................................15
Cleaning the Grease Baffle................................................................................................................16
Replacing the Particle/Odor Filter ......................................................................................................16
Notes ..........................................................................................................................................................17
1
Ventless Hood System Introduction
Introduction
Congratulations! You have chosen BKI’s Ventless Hood system, a state-of-the-art unit that filters grease
laden air and returns it to the room.
The BKI name and trademark on this unit assures you of the finest in design and engineering -- that it has been built with care and dedication -- using the best materials available. Attention to the operating instructions regarding proper operation, installation and maintenance will result in long lasting dependability to insure the highest profitable return on your investment.
PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT. If you have any questions, please contact your BKI Distributor. If they do not answer your questions, contact the BKI Technical Service Department, toll free: 1-800- 927-6887. Outside the U.S., call 1-864-963-3471.
Safety Precautions
Always follow recommended safety precautions listed in this manual. Below is the safety alert symbol. When you see this symbol on your equipment, be alert to the potential for personal injury or property damage.
Safety Signs and Messages
The following Safety signs and messages are placed in this manual to provide instructions and identify specific areas where potential hazards exist and special precautions should be taken. Know a nd understand the meaning of these instructions, signs, and messages . Damage to the equipment, death or serious injury to you or other persons may result if these messages are not followed.
This message indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
This message indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
This message indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
This message is used when special information, instructions or identification are required relating to procedures, equipment, tools, capacities and other spe cial data.
2
Ventless Hood System Introduction
Specific Precautions
Carbon monoxide poisoning will result from using this hood with any appliance that utilizes combustible fuel. Use only electrical appliances with this hood.
In the event of an appliance fire, serious injury, property damage or death could occur if the appliance is not properly secured to the hood. A restraining device has been provided to assure that the appliance remains in the proper position under the hood during normal operation. DO NOT REMOVE THE
RESTRAINING DEVICE!
Hood failure could result if the hood is operated without the grease baffle and particle/odor filter installed. This is a special filter designed for this application only; other filters will not work properly. Use only a BKI particle/odor filter.
Safe Work Practices
Beware of High Voltage
This equipment uses high voltage. Serious injury can occur if you or any untrained or unauthorized person installs, services, or repairs this equipment. Always Use an Authorized Service agent to Service Your Equipment
Keep this manual with the Equipment
This manual is an important part of your equipment. Always keep it near for easy access. If you need to replace this manual, contact:
BKI
Technical Services Department P.O. Box 80400 Simpsonville, S.C. 29680-0400 Or call toll free: 1-800-927-6887 Outside the U.S., call 864-963-3471
Protect Children
Keep children away from this equipment. Children may not understand that this equipment is dangerous for them and others.
NEVER allow children to play near or operate your equipment.
3
Ventless Hood System Introduction
Keep Safety Labels Clean and in Good Condition
Do not remove or cover any safety labels on your equipment. Keep all safety labels clean and in good condition. Replace any damaged or missing safety labels.
If you need new safety labels, contact:
BKI
Technical Services Department P.O. Box 80400 Simpsonville, S.C. 29680-0400 Or call toll free: 1-800-927-6887 Outside the U.S., call 864-963-3471
Prepare for Emergencies
Be prepared for fires, injuries, or other emergencies.
911
Keep a first aid kit and a fire extinguisher near the equipment. You must use a 40-pound Type BC fire extinguisher and keep it within 25 feet of your equipment.
Keep emergency numbers for doctors, ambulance services, hospitals, and the fire departments near your telephone.
Know your responsibility as an Employer
Make certain your employees know how to operate the equipment. Make certain your employees are aware of the safety precautions
on the equipment and in this manual.
Make certain that you have thoroughly trained your employees
about operating the equipment safely.
Make certain the equipment is in proper working condition. If you
make unauthorized modifications to the equipment, you will reduce the safety and function of the equipment.
4
Loading...
+ 14 hidden pages