Bittel HCD9888(67)TSD-S, HA9888(67)TSD-S, HCD9888(68)TSD-S, HA9888(67)TSD-T, HA9888(68)TSD-T User Manual

_______________________________________________________________________

_STH Europe Page 1 of 14 UNO 67 68 SERIES

User Manual

Covers Model

HCD9888(67)TSD-S
HA9888(67)TSD-S

HA9888(68)TSD-S

HCD9888(68)TSD-S
HA9888(67)TSD-T
HA9888(68)TSD-T
HCD9888(68)TSD-T

Followed description maybe different from the real device. Please
keep the real device as the criterion. The telephone is subject to
change without notice. In order to fully use this device please
read this manual carefully.

_______________________________________________________________________

_STH Europe Page 2 of 14 UNO 67 68 SERIES

MAIN FEATURES

UNO Media series telephones are specially designed to meet the need of hotel
guestroom. UNO is made of first class electrical materials, awarded several
patents, which give UNO a variety of functions and magnificent appearance. UNO
consists of two types of phones, the classical version has all the features of hotel
telephone needed, besides the classical version features, the multifunctional
version also has some special features, such like alarm radio, iPod port, USB
charge port .
Some features as below:

● 10 speed dial memory keys

● Program memory keys with R.P master cloner and handheld cloner

● Push-draw style individuation faceplate ,easy printing the hotel logo and user

guide

● Message waiting light compatible with main PBX, MWL indicator and

withdraw feature

● Hearing aid compatible handset

● Speaker and handset volume in three level control

● Ringer volume to high or low control, two line control intelligently

● Default 600ms hook switch flash, adjustable and store

● Busy tone disconnect automatically

● Redials the last number dialed and dialed number disappear within 5 minutes

● Hold current call in waiting mode

● Stop sending during calling

● SPEAKER

● LINE1, LINE2 and Conference

● DTMF/FSK CALLER ID

● Data port

● Data switch

● Alarm , Radio , audio , power charge in one device

● Easy port to connect iPod, MP3 audio device , premium stereo acoustics

● Power charge for portable type iPod and mobile device

● Adjust clock time with special wireless timing cloner

INSTALLATION

1. Install base, bottom, paper faceplate and faceplate holder

Please view the following figures to install the base, bottom base, paper
faceplate and the holder for the faceplate. Just according to the narrow
direction and push to the right position. Then fix the device with attached two
or four pieces screws.

_______________________________________________________________________

_STH Europe Page 3 of 14 UNO 67 68 SERIES

_______________________________________________________________________

_STH Europe Page 4 of 14 UNO 67 68 SERIES

Screw

F o u r S c r e w s

T w o S c r e w s

Base Unit 1 Base Unit 2

_______________________________________________________________________

_STH Europe Page 5 of 14 UNO 67 68 SERIES

Paper

Holder

Port for holder

2. Install handset cord

Insert the attached corded handset cord one end into the jack of handset,
then insert the other end into the jack which on the back of base (marked 2
and 12 in below figure)

3. Install telephone cord

Insert the one end of the straight line cord into the jack labeled “TO TEL”
(marked 14 in below figure), then insert the other end of the line cord into a
telephone wall jack.

4. Install telephone cord

Insert the one end of the attached adaptor into the power jack (marked 17
in below figure), then insert the other end of the adaptor into a wall power
socket.

5. Install Power and Telephone cord (only for model 68 Media)

First please connect the T-Cable’s power jack (Marked 1 in the below figure)
with the power adaptor. Then please connect the T-Cable’s RJ11 (4 pin.
Marked 2 in the below figure) with the telephone line jack in the room. Finally
please connect the T-Cable’s RJ11 port (6 pin. Marked 3 in the below figure) to
telephone set’s “TO TEL” port, which is on the back of the phone.

_______________________________________________________________________

_STH Europe Page 6 of 14 UNO 67 68 SERIES

6. Acoustics control and connection for signal wire (model 68 only)

Insert the signal ribbon cable which from the bottom side of upper case into
the jack labeled “AUDIO CONNECT”, pay more attention to the plug and
socket direction and make sure the connection is correct and firm.

7. Matters Need Attention

● Adopt magnetic switch instead of traditional mechanical switch, please far

away from magnetic field.

● Do not use it in extreme temperatures.

● Do not use aerosol polish, abrasive cleaners.

● Do not tamper with or attempt to modify the phone, it would make it unsafe to

use.

● Handle with care, avoiding hard knocks and shocks.

● If there is any fault please contact your distributor for repair and other service.

TU NIN G VO LU ME

TIM E S ET

1

2

3 4 6 7

8

10

HO LD

LIN E 1

SP KR

MU TE

FL AS H

RE DIA L

CO NF VO L - VOL +

LIN E 2

9

5

_______________________________________________________________________

_STH Europe Page 7 of 14 UNO 67 68 SERIES

1 2

1 1

1 31 41 51 6

19 2017 18

LOCATION AND CONTROL

1 & 2 & 12. Hearing aid compatible handset and handset jack.

3. Display window——Display the Time, Alarm, Sound and Caller ID

_______________________________________________________________________

_STH Europe Page 8 of 14 UNO 67 68 SERIES

4. Infrared Receiving Area ----- Receive the signal of the Infrared Time Control,

for adjusting time（68 series only）

5. Paper faceplate—— for printing hotel logo and user guide.

6. Paper faceplate holder——for installing and changing the paper faceplate.。

7. Memory key and MWL——Support one-touch memory key and message
indicator and withdraw message.

8. Dial keys——Digital key for dialing numbers.

9. Function keys of telephone—— for realizing the main features of the telephone.

10. Function keys of acoustics——for realizing the features of the acoustics.

11. Battery box——Support continue power to clock when no outside power.

13 & 15. Ringer switch——Adjust phone ringer volume Hi or Low

14. Straight line & Power jack ——Modular jack to connect the straight phone line

and power from Phone Port of T-Cable.

16. Data switch ——Modular jack to select the data line.

17. Data port——Provides access to telephone line for modem, fax or answering

machine.

18. LINE IN port——Port for iPod, MP3 and other audio signal connection

19. iPod USB port——Power charge port for iPod, iPhone and other devices.

20. USB Charge port ——Power charge for other portable electrical equipments.

21. Audio Cable ---- Used for connecting music player or mobile phone.

22. iPod Cable --- Used for connecting iPod, iPhone, etc

HOW TO USE

How to use the telephone

1. Adjust the call volume

During the call, press VOL+/- key to adjust the volume level of handset and
speaker. Handset volume resume to low level and speaker stored the current
level after the telephone on-hook.

2. Handset call and speaker call inter-converting

A．From handset to speaker

Just press SPKR key and put the handset on the cradle

B．From speaker to handset

Just lift handset

3. Receiving new call

a. When the phone rings, just off-hook to answer the call;
b. For two line mode, when one line has a call and another new call coming, just

press the accordance line key to answer the new call and another line hang up
automatically.

_______________________________________________________________________

_STH Europe Page 9 of 14 UNO 67 68 SERIES

Press the HOLD key if users like to hold the current call, and then press the
accordance line key to resume.

4. Three way conference

a. Press HOLD key to hold the current line then connect another line, after that

please press CONF key enter into three way conference mode. On-hook status
to finish the conference.

b. In conference mode, press the accordance LINE key to relieve the conference

mode and talk with one party. Or press HOLD key to hold the two lines and then
press the desired line key to talk with the selected line, then press CONF key to
resume the conference mode.

5. To redial the last number dialed

Press REDIAL key to dial the last number dialed but after five minutes the
number will disappear automatically.

6. Using the hold key

Off-hook mode, press HOLD key (the accordance LED indicator light) and put the
handset back, the current line in hold mode, off-hook again can relieve the hold
mode.
If paralleled telephone answer the call, the original phone will detect the current
status and relieve the hold mode and realize on-hook.

7. Mute

During the call, press MUTE key once to stop the sending for handset and
speaker, press it again to relieve the mute mode and resume the calling.

8. Adjust ringer volume

With the adjustment control which locate on the back of the telephone to adjust
the ringer to Low or Hi.

9. Busy tone disconnect automatically

If the handset not on cradle after a phone call, this device can on-hook
automatically after getting busy signal within a definite time. Then the line will
connect accordingly.

10. CALLER ID feature

With the phone set powered for the first time, when receiving caller ID information,
it can recognize the FSK & DTMF automatically and memory them. If user want to
change the format, must disconnect and re-power again. In order to defend secret,
the caller ID number will disappear within a definite time

_______________________________________________________________________

_STH Europe Page 10 of 14 UNO 67 68 SERIES

11. Using one touch memory keys

Off-hook mode, press each memory keys to dial the number directly.

Store the memory number:

On-hook mode, press HOLD key+ desired number+ HOLD key+ memory key

12. MWL

Off-hook mode, press this key can dial the stored number directly; withdraw the
message and other service.
On-hook mode press this key can realize off-hook and dial the stored number
directly, Press it again can realize on-hook mode.
(For USA market, withdraw message indirectly)

Store the message number:

On-hook mode, press HOLD key + desired number +HOLD +MWL key

13. Programming Memory Keys

For this part please kindly refer the manual of Bittel Handheld cloner and R.P
master cloner.

ACOUSTIC PART

1. Play AUDIO

Press AUDIO ON/OFF key to enter or exist audio play mode, then press
RADIO/LINE IN key to realized cyclical selection of LINE IN and FM-RADIO
mode.

●Play iPod/iPhone/MP3 input device

Connect the iPod/iPhone/MP3 to LINE IN port through the audio line, or
Connect the iPod/iPhone/MP3 with the fixed Audio Cable, or

Connect the iPod/iPhone/MP3 with the fixed iPod cable;
Then press the LINE IN key to select the LINE IN mode to realize the audio
playing.

● Play FM radio
Press RADIO/LINE IN key to select the FM-RADIO mode, then press TUNING+/-

select the needed frequency. With each press the frequency changed 0.1MHz,
press TUNING+/-for while to enter into searching frequency forward or backward,
it will stop automatically after searching FM signal.

●Press AUDIO ON/OFF to Pause or Play. Press VOUME+/- to adjust the volume,

total level 0-30, factory default is 15.

●AUDIO OFF mode, press TUNING+ for a while, LCD display ON or OFF (ON or

OFF the hotel mode), ON: volume 0—20, OFF: volume 0-30.

●AUDIO OFF mode, press RADIO/LINE IN not release, LCD display Time, Month,

Day , Year , DST Zone and easy to view the setting parameters.

●Detect the device mode intelligently

_______________________________________________________________________

_STH Europe Page 11 of 14 UNO 67 68 SERIES

If telephone ringing or off-hook under FM-RADIO or LINE IN mode, the
telephone can PAUSE audio playing , after the phone call finished or ringing
stopped it can resume to playing mode again.

2. Set Time

Under AUDIO OFF mode (not LINE IN or FM-RADIO working mode) to set the
time

● Press VOLUME- key 1S，hour digit flashing on the LCD , press TUNING+/- to
adjust hour.

● Press VOLUME- key, minute digit flashing, press TUNING+/- to adjust minute.

● Press VOLUME- key or no operation to finish the setting.

● Press VOLUME+ key to adjust 12 hour format and 24 hour format.

3. Set alarm

●Set Alarm Time
* Press ALARM SET key, the hour digit display on the LCD, press the

VOLUME+/- to adjust the hour.

* Then press the ALARM SET key, the minute display on the CLD, press

VOLUME+/- to adjust the minute.

* Then press the ALARM SET key or no operation to finish the setting.

* Unlock the Alarm
Press ALARM key to start and close alarm. In start mode the alarm and its mark
on the top right corner, when in close mode, the alarm and its mark disappear.

●Alarm snooze feature
When alarm ringing, press any key and the alarm stop ringing for 10 minutes.
After 10 minutes it will ring again. Except ALARM key press any other keys or
telephone off-hook can stop ringing.
Alarm ringing during playing mode, it exist playing mode automatically.

● In AUDIO OFF mode, press ALARM VOLUME key to adjust the alarm

indicator volume, each press increase 5, the top level is 20. The default is 10.

4 Adjust LCD brightness
Not alarm ringing mode, press SNOOZE to adjust the LCD brightness, there

are Mid. Hi .Close three levels for selecting.

5. Charge port

There are two USB port, charge for some devices with mini USB line.
* iPod USB port ---For charging iPod, iPhone apple devices .
*USB Charge port—— For charging mobile phone and other peripheral products.
* LINE IN audio input port --- With 3.5mm dual track audio lines connect

iPod/MP3 to acoustics.

6. Homing system

Press ALARM for 2 seconds the device enter into homing system. It’s easy
for housekeeping.

7. Adjust time with Remote Time Control

_______________________________________________________________________

_STH Europe Page 12 of 14 UNO 67 68 SERIES

First install two 7# 1.5V batteries into the before using it. Pay attention to the
polarity of the battery. Don’t mix the old and new batteries.

8. Change clock’s battery

First please take off the battery from the battery cabinet on the back of the

phone. Then please install new battery. The specification of the battery is 3V,
50Mah.

Note: The anode of the battery should be toward outside. The battery should be
changed every two years

Remote Time Control

Set time with the Remote Time Control

●Press TIME SET key, hour digits flashing, press UP/DOWN key to adjust,

●Press TIME SET key, press UP/DOWN key to adjust minute,

●Press TIME SET key, press UP/DOWN key to adjust month,

●Press TIME SET key, press UP/DOWN key to adjust day,

●Press TIME SET key, press UP/DOWN key to adjust year,

●Press TIME SET key, LCD display the time, setting finished.

Set DST area code with the Remote Time Control

●Press DST SET key, then press UP/DOWN key to set the area code:
00= DST OFF, 01=USA/Canada, 02=Europe/Russia/Swiss;

03= Mexico, 04=New Zealand

1. LCD Display

2. DST SET key——Set DST time.

3. TIME SET key——Set time and date.

4. TIME PROG key——Adjust time and

date .

5. DST PROG key ——Adjust DST time.

6. UP key —— Upward key.

7. DOWN key——Downward key.

_______________________________________________________________________

_STH Europe Page 13 of 14 UNO 67 68 SERIES

Adjust Time

●After above setting, press TIME PROG or DST PROG at the right upper

direction within 10cm near the base LCD to adjust the TIME or DST Time.

Conversion of 12- Hour Format and 24- Hour Format

●When LCD display time, press TIME SET over 2 seconds to realize the

conversion.

Note: If the attached Remote Time Control is different than above image, please

according to the attached object.

Maintenance and troubleshooting

1. No dialing tone of handset

Check the telephone network,
Check the connection of handset cord and straight line cord

2. No ringing or no continually ring

Check the telephone line
Check the quantity of parallel phone set

3. Noise during talk

Check the telephone line
Check the handset cord

4. No caller ID

Check if the caller ID feature open.
Check the power supply

5. Acoustics no sound

Check the device connect to power or not
Check the 10pins ribbon cable and AUDIO CONNECTION

6. No signal or nersy noise after radio selected the channel

Adjust the direction of the radio antenna
No the selected channel in local

FCC APPROVAL

Complies with Part 68 of the FCC rules. On the bottom of this telephone is a label
that contains, among other information, the FCC registration number and the
ringer equivalence number (REN) for this telephone. If requested, you must
provide this information to the Telephone Company.

CE APPROVAL

Complies with CE approval.

JACKS

Uses RJ11C USOC standard modular jacks.

_______________________________________________________________________

_STH Europe Page 14 of 14 UNO 67 68 SERIES

WARRANTY

This product is warranted for a period of 12 months from the date of purchase
against faulty materials or workmanship. If during this period a defect arises, we
may repair or replace the product, at our discretion, provided that:

1) The product has not been used for any purpose other than normal use,

2) Unauthorized product repair or modifications have not been attempted.

3) The product has never been used in a harsh or corrosive environment.

4) No damage in transit

THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS.
THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM
JURISDICTION TO JURISDICTION.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

CONTACTING STH Europe:

Tel. [phone]
Fax [phone]
Website: www.stheurope.com

Email: [e-mail]

Address: Siriusdreef 17-27

PO Box 394, 2130 AJ Hoofddorp
The Netherlands