Bittel 32, HA9888(32)TSD-A-S User Manual

BITTEL ELECTRONICS CO., LTD.

SERIES

VENUS SERIES PHONE

USERS MANUAL

FOR MODEL :

HA9888(32)TSD-A-S

Table of Contents

1. Introduction to Bittel UNO Media Guestroom Phone

1.1 Classical Features

1.2 Specifications

2. Installation

2.1 Installation

2.2 Controls, Connections and Function keys

3. Operation

3.1 Placing a Call

3.2 Receiving New Call

3.3 Adjusting Handset and Speaker Volume

3.4 Redial Function

3.5 Using The [Hold] Key

3.6 Adjust Ring Volume

3.7 Programming Memory Keys

3.8 Speakerphone Tips

3.9 Message Waiting LightT

3.10 Data Port

4. How To Use The Telephone

4.1 Off-Hook

4.2 On-Hook

5. Approval

5.1 FCC Approval

5.2 CE Approval

5.3 Jacks

5.4 Hearing Aid Compatibility

6.Service

6.1 Warranty

6.2 FCC Warranty

6.3 Customer Service Center

---- Page 1----

2 2

3 3 4 4 4 4 4 4 4 4

4 4

4 4 5 5

5 5 5

Bittel ’ s 32 series is available in single line configuration, with optional speakerphone and up to 10 programmable guest service keys.

Built to the industry ’ s highest quality control standards in our own ISO9001 certified factories, Bittel phones deliver outstanding value and quality, and are engineered for the demanding hospitality environment.

1. Introduction to the Bittel 32 series

1. Introduction to the Bittel 32 series Phone

Phone

1.1 Classical Features

◆ SmartTray ™ , keep the cord in right place tidily and easy to clean

◆ Support 10/5 Guest Service keys ™

◆ Message Waiting Light and Ringer Indicator

◆

PrivacyGuard ™ , Last dialed number disappearing after

a definite time

◆

Faceplate Plus ™ , full length faceplate and placard

faceplate optional

◆ Flexible Data Port

◆ Indicators for Hold and SPKR

◆ Hold, Flash and Redial

◆

Ringer Volume HI/LOW adjustable

◆ Handset with HAC

◆

SPKR and Handset volume three-step adjustable

◆ Desk and Wall Mountable

1.2 Specifications

◆

Dimensions

： 220(L) * 150(W) * 95(H)

◆

Handset cord

： 2.7m (Length)

◆ Line cord

Line cord

Line cord ：

2.0m(Length)

◆

Color

： Ivory 、 Black optional

◆ Handset

Handset

Handset ：

Hearing Aid Compatible Handset

◆

Dial Character

： Standard 12 group （ DTMF ）

◆

Flash time

： 80ms,100ms,300ms,600ms optional ，

standard 600ms

◆

Message Waiting Light Voltage

： Standard

90~150V DC Customizedd various MWL card compatible with PBX

◆

Operating Voltage

： 24V ～ 60V DC

◆

One-Touch Memory Key Programming

：

Manually Store(√) Hand-held Cloner R.P.(×) Master Cloner on line( × )

◆ Box Dimension

Box Dimension

Box Dimension ：

467(L) * 340(W) * 225(H)

◆

Package

Package (set/carton)

(set/carton)

： 10set/Carton

◆

Quality Control

： ISO9001, ISO 14001 System

◆

Quality Approval, CCC, FCC, CE, RoHS

◆

FCC rules

： The unit complies with part 15 and part

68 of the FCC rules and regulations

2. Installation

The Venus Series is designed for hotel applications and behind a registered PBX system in hotel. Determine you have the correct modular jack for connecting the telephone. If you do not have a modular jack, one may be obtained at minimal cost at a local hardware store, discount store or home center.

1) Located on the left side of the Venus phone is a modular jack. Insert one end of the coiled handset cord into this jack (you will hear the coil cord click when properly inserted.)

2) Insert the other end of the coiled handset cord into the modular jack on the handset.

3) Turn the telephone so the back panel is facing you. Insert either end of the line cord into the jack on the back of the telephone labeled “ TO TEL ” .

4) Insert the other end of the line cord into a telephone wall jack.

5) Once your telephone is connected, place the paper faceplate over the keys. The plastic overlay slips into place by hooking the tabs on the overlay into the recessed slots located on both sides. The overlay is easiest to insert when the left or right side tabs are inserted first, and the middle of the overlay is slightly bowed to allow for insertion of the other tabs.

2.2 Controls, Connections and Function keys

2.1 Installation

The Venus Series is designed for hotel applications and behind a registered PBX system in hotel. The Venus Series is designed for hotel applications and behind a registered PBX system in hotel.

---- Page 2----

1. Handset Cord Jack --- Modular jack to connect coiled handset cord from handset to telephone.

2. Handset Wall Mount Clip – Clip to hold handset on hook in wall mount application

3. Hook Plunger.

4. Data Port – Provides access to the telephone line for connection of modem, fax, or answering machine

5. Memory Keys – Programmable to add special features or one touch dial frequently dialed numbers.

6. Dial Keys – Oversized keypad for ease of dialing.

7. Volume key – Key steps through the three available handset /speaker volume levels [Normal – Medium – High – Normal]

8. Redial Key – Redials the last number dialed.

9. Flash Key - Enters a 600ms hook switch flash for accessing special telephone system features.

10. SPKR Key – Activates speakerphone function.

11. [Pause] key -- Hidden key inserts a 3.6 second pause in stored numbers.

12. MIC. of Speaker .

13. Message Waiting Light – Indicates the phone is ringing or a message is waiting. Responds to Neon/90V message waiting signal.

14. Store Key – Hidden key for storing numbers to Memory.

15. Hold Key – Places a calling on hold.

16. Tel. Jack – Modular jack to connect telephone line cord.

17. Ring Volume – Adjusts ringer volume to LOW or HI.

+ 3 hidden pages

Bittel 32, HA9888(32)TSD-A-S User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual