BITSCOPE BITSCOPE MP01A Datasheet

BitScope

Mixed Signal Probe Adapter

Digital + Analog

Standard Oscilloscope Probes

Use industry standard attenuating
oscilloscope probes, 1:1 to 100:1.

Active Differential & Current

Use differential, current and any other
probe compatible with scope inputs.

2 x BNC + 2 x Twisted Pair Inputs

Optional twisted pair analog inputs,
configurable ground termination.

6 x Logic + 2 x Comparator Inputs

Connect logic inputs via twisted pairs,
two signals via adjustable comparators.

Waveform and Clock Generators

Analog waveform and clock generators
available via the mixed signal header.

Configurable Signal Routing

Signal routing is configurable via
included colour coded terminators.

BitScope Micro Port 01

New

New

Universal I/O Adapter for BitScope Micro

CHA

CLK

L5

L5 may be configured as

a 3.3V Digital Clock Output

Dual channel oscilloscope probe adapter for BitScope Micro. Use standard oscilloscope

probes connected via the pair of BNC sockets. Allows twisted pair connections via two
additional analog inputs, 6 logic inputs and 2 comparators. Connect BitScope's analog

waveform and programmable clock generators via pin configurable terminators.

L3

CHA

1M / 10pF

L2

GND

50V Max

L1

L0

CHB

CHB

AWG

L4

L4 may be reconfigured as a

3.3V Waverm Generator

bitscope.com/product/MP01

Specification

NOTE

MP01A

Analog Inputs

BNC

2 (Coaxial)

Analog Inputs (Auxilliary)

POD

2 (Twisted Pair)

Logic Inputs (3.3/5V)

6 (Twisted Pairs)

Comparator Channels

2 (via CH-A & CH-B)

Waveform Generator

1 (via L4)

Clock Generator

1 (via L5)

Input Impedance (Analog)

1 MΩ / 20 pF

Input Impedance (Digital)

100 kΩ / 5 pF

Voltage Range (Direct)

1:1

-7.5 V ~ +10.8 V

Voltage Range (Scaled)

10:1

-75 V ~ +108 V

Power Requirement

None

Operating Temperature

0 ºC to 40 ºC

Storage Requirements

-40 °C ~ +40 °C / 5 % ~ 95 % RH

Dimensions (WxDxH)

60 x 50 x 20 mm

Weight

NET

28 g

EL04A

BNC

Standard coaxial BNC connection for Belden 9907, RG58C, RG141A, URM43 or URM76

POD

Connection via two adjacent pairs of pins on the 16-pin right-angle header.

1:1

When direct connection or connection via a 1:1 oscilloscope probe is used.

10:1

When connection is made via a 10:1 passive attenuating oscilloscope probe.

MP01 Specifications