Bissell 92N0 Assembly
NATURAL SWEEP
™
92N0 SERIES
Emptying
Asmbly
Your sweeper requires very little assembly.
1. Lay handle sections out with the handle grip
at the top. Fit smaller threaded handle sections
into larger handle sections and tightly screw
together until secure.
2. Take the assembled handle and tightly screw
the threaded end onto the connector piece on
top of the sweeper pressing. While screwing the
handle to the body of the sweeper, press down
firmly, but carefully to ensure that the handle is
securely connected
To empty the dirt pans hold the sweeper over a
trash bin and pull down on the tabs on the sides
of the sweeper.
1
1 3
2
3
1
2
For best performance keep brushes and bearings clean of hair, threads and other debris.
The sweeper case will bow slightly to allow the center brush rolls to be removed for cleaning. To
replace brush rolls fit the bearing to the proper axle end.
Maintaining
©2017 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 161-1836 01/17 RevA
Visit our website at: www.BISSELL.com
2
Loading...