Bissell 5207A Quick Start Manual

QUICK START GUIDE

SPOT

WARNING:

Refer to the enclosed user guide for complete instructions and important safety notices.

CLEAN

3” Tough Stain Tool

Power Button

Formula & Clean Water Tank

Flex Hose

PRODUCT PARTS

Carry Handle

Dirty

Water Tank

WE CAN’T WAIT TO HEAR FROM YOU!

Rate this product and let us (and millions of your closest friends) know what you think!

Visit your retailer’s website or www.bissell.com.

Power Cord

Quick Release™ Cord Wrap

ASSEMBLY

1. Slide ex hose clip into the opening on the front

of the machine until you hear a “snap.”

2. Snap the hose grip bracket into the back of machine on the clean tank side. Wrap ex hose around unit and snap hose grip into bracket.

3. Attach cord wrap by snapping it into place on the dirty water tank side of the machine. Wrap power cord around cord wrap.

QUICK PREP STEPS

1. Unwrap hose and select desired tool.

Tool easily snaps onto hose.

2. Remove tank from tool side of unit. Pull on the

black tab to remove rubber stopper and reveal tank opening.

3. Your tank is marked for a large stain or a small

stain. Based on your cleaning need, ll with hot tap water to the water ll line. Add OXYgen Boost to the OXYgen Boost ll line. Add BISSELL 2X formula to the formula ll line.

4. Replace rubber stopper, then replace the tank

on the machine.

5. Twist the quick release cord wrap to release the cord, plug in, and you’re ready to spot clean!

GUIDELINES TO SPOT CLEAN

1. Hold the tool 1 inch above soiled surface and spray

trigger to apply cleaning formula.

2. Gently scrub the area with brush on tool.

3. Apply downward pressure to the tool and pull it

toward you to suction up the dirt and cleaning formula. Continue until no more dirt can be removed.

CLEANING FORMULA

›› Always use genuine BISSELL portable deep cleaning

formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty.

BISSELL 2X Portable Machine Spot & Stain Formula and OxyGen Boost Formula

For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Care 1-800-237-7691

Monday – Friday 8 am - 10 pm ET Saturday 9 am - 8 pm ET Sunday 10 am - 7 pm ET

Or visit the BISSELL website www.bissell.com