Bissell 47M6 User Manual

PowerForce

BAGLESS

USER’S GUIDE

47M6 SERIES 220-240V

Safety Instructions

Product View

Assembly

™

6-7

8-12

12-13

Operation

Maintenance and Care

Troubleshooting

Consumer Services

Replacement Parts

Warranty

ug110_4052_47M6_808.indd 1ug110_4052_47M6_808.indd 1 8/12/08 1:34:22 PM8/12/08 1:34:22 PM

Thank you for buying a BISSELL PowerForce

We’re glad you purchased a BISSELL PowerForce Bagless Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system.

Your BISSELL PowerForce Bagless is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL PowerForce Bagless.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman, President & CEO

™

Bagless Vacuum

www.bissell.com

ug110_4052_47M6_808.indd 2ug110_4052_47M6_808.indd 2 8/12/08 1:34:23 PM8/12/08 1:34:23 PM

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical basic precautions should be observed, including the following:

appliance,

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

WARNING: To reduce

the risk of fire, electric shock, or injury:

■

Use indoors only.

■

Do not leave machine when it is plugged in.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water, return it to a service agent.

■

Do not handle unit with wet hands.

■

Do not pull or carry by cord, use cord as a handle, close

door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.

■

Do not unplug by pulling on cord. Unplug by

grasping plug.

■

Do not run appliance over cord.

■

Do not handle plug or appliance with wet hands.

■

Do not expose hair, loose clothing, fingers or body

parts to openings or moving parts.

■

Do not pick up hot or burning objects such as

cigarettes, matches, or hot ashes.

■

Do not pick up flammable or combustible materials (lighter

fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapour.

■

Do not use appliance in an enclosed space filled with

vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours.

■

Not intended for use by young children or infirm

persons without supervision.

■

Young children should be supervised to ensure that they do

not play with the appliance.

■

Remove plug from electrical outlet before cleaning or

maintaining the appliance.

■

If the supply cord is damaged, it must be replaced by

the manufacturer or its service agent in order to avoid a hazard.

■

Do not pick up toxic material (chlorine bleach,

ammonia, drain cleaner, petrol, etc.).

■

Do not allow to be used as a toy.

■

Do not use for any purpose other than described in

this User’s Guide.

■

Use only manufacturer’s recommended attachments.

■

Do not use with any opening blocked; keep free of

dust, lint, hair, and anything that may reduce air flow.

■

Keep appliance on a level surface.

■

Turn off all controls before unplugging.

■

Be extra careful when cleaning stairs.

■

This appliance is provided with double

insulation. Use only identical replacement parts.

■

Do not use without debris tank and/or filters in place.

■

Pay close attention when working

around children.

SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.

IMPORTANT

FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz POWER SUPPLY ONLY.

FOR RESIDENTS OF THE UNITED KINGDOM ONLY

If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a mains socket.

www.bissell.com

ug110_4052_47M6_808.indd 3ug110_4052_47M6_808.indd 3 8/12/08 1:34:23 PM8/12/08 1:34:23 PM

Product view

Cord Clip

Hose Clip

Stretch Hose

Handle

Crevice Tool

Twist 'n

™

Hose

Snap Connector

Combination Dusting Brush/ Upholstery Tool

Power Switch

Handle Release Pedal

Foot Hose

CAUTION:

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

Carrying Handle

Extension Wand

Quick Reach Handle

Hose Wand

Hose Wand Base

Pre-Motor Filter

™

Powerfoot

Quick Release™ Cord Wrap

Power Cord

Primary Separator

Upper Tank

Dirt Container

Filter Cup Inner and Outer

Circular Filters

Lock ’n Seal Lever

Post-Motor Filter

Height Adjustment Knob

Furniture Protection Guard

™

www.bissell.com

ug110_4052_47M6_808.indd 4ug110_4052_47M6_808.indd 4 8/12/08 1:34:24 PM8/12/08 1:34:24 PM

How to use this guide

This User’s Guide has been designed to help you get the most satisfaction from your BISSELL PowerForce Bagless. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User's Guide thoroughly before assembling your vacuum cleaner.

Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL PowerForce Bagless for many years.

Assembly

The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.

Attach handle to vacuum

1. Locate the vacuum handle and remove the screw packet taped to the base of the handle.

2. Stand the vacuum upright and place the handle on the top of the vacuum body.

3. Insert the screws into the existing holes on each side. Tighten securely with a screwdriver.

WARNING:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

Attach vacuum hose and tools

1. Attach the Twist ‘n Snap™ hose by lining up the tabs on the base with the corresponding notches on the back of the vacuum as shown.

2. Turn the Twist ‘n Snap hose to the right to lock the hose into place.

3. Grasping the Quick Reach™ handle, slide the end of the hose wand onto the hose wand base. Snap the hose into the hose clip.

NOTE: The powerfoot will not operate effectively unless the hose wand is firmly attached.

4. Slide the extension wand and the crevice tool

together into the storage clip on the side of the vacuum.

5. Snap the combination tool into the storage clip on the back of the vacuum.

www.bissell.com

ug110_4052_47M6_808.indd 5ug110_4052_47M6_808.indd 5 8/12/08 1:34:25 PM8/12/08 1:34:25 PM

+ 11 hidden pages