Bissell 2X 9200 User Manual

c>

ProHeat 2)C

8920, 9200,9300,9400 SERIES

3 1

Safety Instructions

i:

/

6-17

17-18

19-20

24

We're glad you purchased a BISSELL ProHeat 2X heated formula deep cleaner.
Everything we know about floor care went into the design and construction of
this complete, high-tech home cleaning system.

Your ProHeat 2X is well made, and we back it with a limited one-year warranty.
We also stand behind it with a knowledgeable, dedicated Consumer Services
department, so, should you ever have a problem, you’ll receive fast,
considerate assistance. v

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a
global leader in the design, manufacture, and service of high quality homecare
products tike your ProHeat 2X,

Thanks again, from all of us at BISSELL.

. President and Chief Executive Officer

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appjiance, basic precautions ■ Use onl

should be observed, Including the following: BISSELI

Read all instructions before using your PROHEAT 2X®. compor

AwARNING; To reduce the risk of fire, . Keeo oi

electric shock, or injury:

Do not immerse.

Use only on surfaces moistened by
cleaning process
Always connect to a properly grounded outlet.
See Grounding Instructions
Unplug from outlet when not in use and before
conducting maintenance or troubleshooting

Do not leave machine when it is plugged in
Do not service machine when it is plugged in
Do not use with damaged cord or plug
If appliance is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water,
have it repaired at an Authorized Service Center
Use indoors only

Do not pull or carry by cord, use cord as a hardle, close
door on cord, pull cord around sharp corners or edges, run
appliance over cord, or expose cord to heated surfaces

Unplug by grasping the plug, not the cord

Do not handle plug or appliance with wet hands
Do not put any object into appliance openings,
use with blocked opening, or restrict air flow
Do not expose hair, loose clothing, fingers

or body parts to openings or moving parts

Do not pick up hot or burning objects
Do not pick up flammable or combustible materials (lighter
fluid, gasoline, kerosene, etc.) or use in the presence of

explosive liquids or vapor

■ Do not use appliance in an enclosed space filled with
vapors given off by oil base paint, paint
thinner, some moth proofing sub stances, flammable dust,

or other explosive or toxic vapors

■ Do not pick up toxic material (chlorine bleach, ammonia,

drain cleaner, gasoline, etc.)

■ Do not modify the 3-prong grounded plug

■ Do not allow to be used as a toy

■ Do not use for any purpose other than

described in this User’s Guide

■ Do not operate the appliance unless the

nozzle is securely assembled in the
location provided

■ Do not unplug by pulling on the cord

■ Use only manufacturer’s recommended

attachments

■ Always install float before any wet pick up operation

■ Use only cleaning products formulated by
BISSELL for use in this appliance to prevent internal
component damage. See the cleaning fluid section
of this guide

■ Keep openings free of dust, lint, hair, etc.

■ Do not point attachment nozzle at people
or animals

■ Keep appliance on a level surface

■ Turn off all controls before unplugging

■ Unplug before attaching the Turbo Brush

■ Be extra careful when cleaning stairs

■ Close attention is necessary when used by

or near children

WARNING: The Power Cord on this product contains

lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.

WASH HANDS AFTER HANDLING

SAVE THBE INSTRUCTIONS.

THIS MODEL IS EOR HOUSEHOLD USE ONLY.

Commercial use of this unit voids the manufacturer’s

warranty.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring
system. If it should malfunction or break down,
grounding provides a safe path of least resistance for
electrical current, reducing the risk of electrical shock.
The cord for this appliance has an equipment-grounding
conductor and a grounding plug. It must only be plugged
into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.

A WARNING; Improper connection of the

equipment-grounding conductor can result In a
risk of electrical shock. Check with a qualified
electrician or service person If you aren’t sure If
the outlet Is properly grounded. DO NOT MODIFY
THE PLUG. If It will not fit the outlet, have a
proper outlet Installed by a qualified electrician.
This appliance Is designed for use on a nominal
120-volt circuit, and has a grounding
attachment plug that looks like the plug In the
drawing above. Make certain that the appliance
Is connected to an outlet having the same
configuration as the plug. No plug adapter
should be used with this appliance.

Optional Accessories:

These items are available for purchase with your model. To order replacement parts or additional tools or formulas, please refer to page 22-23.

3” Tough Stain Brush : 4”. Upholstery Tool 6” Wide Stair Tool TurboBrush™ Bare Floor Attachment

Spraying Crevice Too!

Scotchgard protector Tool Ba
appifoator

Optional Accessories:

These items are available for purchase with your model. To order replacement parts or additional.tools or formulas, please refer to page 22-23.

Keep plenty of genuine BISSELL

Advanced Cleaning Formulas on

hand so you can clean whenever

it fits your schedule. Always use
genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning
solutions may harm the machine
and void the warranty.

16 oz. BISSELL
Fiber Cleansing
Formula™ with

16 oz.

Tough Stain

PreCleaner"'
Scotchgard™
Protection

8 oz,
Hard Floor
Solutions™

8 oz, .
Scotchgard
protector
Cartridge

This User’s Guide has been designed to help you get
the utmost satisfaction from your BISSELL ProHeat 2X.
You’ll find assembly and operating Instructions, safety
precautions, as well as maintenance and troubleshooting
Instructions. Please read this Guide thoroughly before
assembling your Deep Cleaner.

Pay particular attention to the product diagram, assembly
Instructions, and part names. Locate and organize all
parts before assembly. Familiarize yourself with the
parts and where they go. Following this User’s Guide will
greatly enhance your ability to get the most performance

from your BISSELL ProHeat 2X for many years.

Your ProHeat 2X comes in four easy to
assemble components. . v .

Upper Handle

. LowerBase .

. Tool Caddy(2 pieces) .

The only thing you will need to assemble your cleaner is
a Phillips head ^ screwdriver.

Refer to Assembly Diagram on page 4

Slide Upper Handle onto Lower Handle. Screw in
with 3 screws.' ^ ■ ■

...

..........

.

A WARNING;

Do Not plug in your cleaner
until you have completely
assembled it per the toilowing
Instructions and are tamil
lar with all instructions and
operating procedures.

Place Upper Hose Rack onto back of Upper ■
Handle, and secure with 1 screw.

O

Place Lower Hose Rack onto back of Upper
Handle by pushing in and sliding down until it

o

snaps into place. ■ ; ■ '

Snap tools into the Tool Gaddy as shown in
figure 4.'

o

Wrap Power Cord and Flex Hose as shown in
figure 5. ■ ■ ■ ^ .

o

Keep Flex Hose snugly in place by using the
Hose Secure Latch. ■

e

ProHeat 2X assembly is now complete.

o

Your BISSELL ProHeat 2X Deep Cleaner is a home
cleaning system that uses the power of heat and
brushes to get the deep down dirt for a maximum
clean. Not only does it come with a lot of unique
features, it has been designed with you, the customer,
in mind.

BISSELL ProHeat models all feature a patented built-in
heater which will heat the hot tap water you put in up
to 25 degrees hotter to safely optimize cleaning
effectiveness. The heater will never allow the
temperature to exceed 190 degrees. The Heater switch
on the front of the machine controls the heater so you
have the option to turn off the heat if you are cleaning
delicate wool or oriental rugs.

The 2 Dirlifter PowerBrush rolls are designed to
enhance cleaning performance. The bristle pattern safely
lifts out the deep down dirt while gently grooming carpet
fibers. The floating suspension self-adjusts to all carpet
heights and protects your carpet if you leave the power
switch ON (I). Once the product is in the Upright
position, the brushes automatically stop spinning. Tlie

Detent Pedal will activate the brush when floor cleaning.

The Custom Clean feature automatically mixes hot tap
water with the BISSELL formula. Simply choose one
of the 4 settings (Heavy Traffic, Normal Clean, Light
Clean, or Rinse) and the ProHeat 2X will adjust the right
amount of cleaning solution to mix with the heated
water to fit your cleaning need.

Having a separate solution tank from the water tank
also allows no waste of formula. Because the water
and solution are stored separately, they are not mixed
until you are ready to clean. When your cleaning job is
finished, the formula can be stored ready to use in your
machine for the next time!

This feature is available on all ProHeat 2X models, either
on top of the Water Tank or on the Upper Handle.

Carpet protection applied at the mill typically wears
down with heavy foot traffic over time and with
everyday cleaning, inciuding deep cleaning. To help
restore this importent protection, BISSELL offers deep
cleaning formulas with Scotchgard protector and a
post-appiicator to apply Scotchgard protector with the
same materials used by carpet mills. This offers extra
protection against dirt and tough steins to keep your
carpets looking good longer.

Until now, to maintain your Scotchgard 5-year
limited stain warranty, you were required to hire
a professional. By using your BISSELL ProHeat 2X
machine with BISSELL formulas containing Scotchgard
protector every 12 months, your carpet warranty from
3M remains In effect No other home deep cleaning
system can do this for you. Refer to the Scotchgard
protector warranty for details.

Our 2-in-t full capacity tenk system is designed with
a heavy duty bladder inside for clean water. As you
clean, the clean water in the bladder will empty and
mix with the cleaning formula. Dirty water pulled out

of your carpets will collect around the outside of the
bladder so that clean and dirty water are always kept
separate. This allows the user to maximize tenk space,
yet only carry one tank to and from the sink for
emptying and filling.

O

Now, cleaning up your machine after the cleaning
process is easier ttian ever! Simply remove the 2-in-1
Tank and remove the screwto pop out the nozzle for
rinsing in the sink. Dirt, loose carpet fibers, and
remaining pet hair orfuzz gets washed away in a snap.

Tills provides either floor cleaning or above the floor
cleaning with the turn of a knob. If choosing above
floor cleaning for upholstery, stairs, or in those creases
close to the baseboards, choose the attachment
appropriate for the job, attach it to the flex hose, and
you are ready to go!