PET HAIR ERASER
SLIM CORDED
Series 2897
Warranty ...............................................................................2
What’s in the Box? ............................................................. 3
Assembly .............................................................................. 3
Installing the Wall Mount & Tool Storage Station ... 3
Using the Vacuum .............................................................. 4
Attaching Tools for Hand Vac Use ............................... 4
Emptying the Dirt Tank ....................................................5
Cleaning & Replacing the Filter ..................................... 6
Maintaining the Pet TurboEraser® Tool.......................6
Maintaining the Brush Roll .............................................. 7
Troubleshooting ................................................................. 7
Product Overview
1. Hand Vacuum
2. Power Switch
3. Tank Release Button
4. Dirt Tank
5. Hand Vacuum
Release Button
6. Extension Wand
7. Foot Release Button
8. Tangle-Free Brush Roll
9. Motorized Floor Cleaning Foot
10. Cord Wrap
11. Foot Hose
1
2
3
5
7
8
®
4
10
6
9
11
Go online for a comprehensive walkthrough
of your new purchase!
This guide has everything you need to get ready for first use, including
setting up, using and maintaining your machine, but online you’ll find
additional resources like tips and troubleshooting, videos, product
registration, parts, and more. Go to support.BISSELL.com.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM.
When using an electrical appliance, basic precautions should be observed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
» Do not leave vacuum cleaner when it is plugged in.
Unplug from outlet when not in use and before servicing.
» Do not use outdoors or on wet surfaces.
» Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
» Do not use for any purpose other than described in this
user guide. Use only manufacturer’s recommended
attachments.
» Do not use with damaged cord or plug. If appliance is not
working as it should, has been dropped, damaged, left
outdoors, or dropped into water, have it repaired at an
authorized service center.
» Do not pull or carry by cord, use cord as a handle, close a
door on cord, or pull cord around sharp edges or corners.
Do not run appliance over cord. Keep cord away from
heated surfaces.
» Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
» Do not handle plug or vacuum cleaner with wet hands.
» Do not put any object into openings. Do not use with any
opening blocked; keep openings free of dust, lint, hair, and
anything that may reduce air flow.
» Keep hair, loose clothing, fingers, and all parts of body
away from openings and moving parts.
» Turn OFF all controls before plugging or unplugging
vacuum cleaner.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in areas
where they may be present.
» Do not use vacuum cleaner in an enclosed space filled
with vapors given off by oil-based paint, paint thinner,
some moth-proofing substances, flammable dust, or other
explosive or toxic vapors.
» Do not use to pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
» Do not pick up anything that is burning or smoking, such
as cigarettes, matches or hot ashes.
» Do not use without filters in place.
» Do not pick up hard or sharp objects such as glass, nails,
screws, coins, etc.
» Use only on dry, indoor surfaces.
» Keep appliance on a level surface.
» Do not carry the vacuum cleaner while it is running.
» Unplug before connecting or disconnecting the
TurboBrush® Tool.
» Always connect to a polarized outlet (one slot is wider
than the other). Unplug from outlet when not in use
and before conducting maintenance. Do not modify the
polarized plug to fit a non-polarized outlet or extension
cord.
» Plastic film can be dangerous. To avoid danger of
suffocation, keep away from children.
» Any servicing other than what is recommended in this
instruction manual should be performed by an authorized
service facility.
THIS APPLIANCE HAS A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install a proper outlet. Do not change the plug in any way.
SAVE THESE INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Warranty
2-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691
for complete warranty information.
2 BISSELL.com
What’s in the Box?
Standard accessories may vary by model.To identify what should be included with your purchase,
please refer to the “Carton Contents” list located on the underside of the insert inside the carton.
Hand Vacuum Extension Wand Foot Pet TurboEraser®
Tool
Crevice Tool Wall Mount &
Assembly
Go to support.BISSELL.com for assembly videos.
1. Connect the Extension Wand
to Motorized Floor Cleaning
Foot. You’ll hear a “click” when
they’re connected.
2. Connect the Hand Vacuum
to the Extension Wand. You’ll
hear a “click” when they’re
connected.
3. Wrap cord on the side of
the product where the cord
clips are located.
Installing the Wall Mount & Tool Storage Station
Go to support.BISSELL.com for more tips and video instructions.
Tool Storage
Station
1. Insert tool holder on the
side of the wall mount.
2. Screw the wall mount into
a wall. Ensure the mount is
high enough up off the ground
for the vacuum to hang
comfortably. Screwing into
a wall stud will provide best
support.
3. Hang the vacuum on the
center storage piece and
insert tools on the tool holder
provided.
BISSELL.com 3
Using the Vacuum
Looking for more guidance? Go to support.BISSELL.com for tips and 24-7 support while
cleaning.
Pet Hair Eraser® Slim Corded can be used as a stick vacuum, hand vacuum or for extended reach with
the Hand Vacuum and Extension Wand.
1. Slide the Power Switch
down to begin cleaning and
back up to turn the machine
OFF when finished cleaning.
2. Choose your cleaning mode:
Hard Floor Mode
Slide the Power Switch down
1 notch. This mode is great for
hard floors, low pile carpets
and area rugs and provides a
quieter sound. The Brush Roll
does not spin in Hard Floor
Mode.
Carpet Cleaning Mode
Slide the Power Switch
down 2notches. This is
recommended for maximum
suction and provides the most
powerful clean. This mode is
perfect for high, medium and
low pile carpet.
Attaching Tools for Hand Vac Use
Go to support.BISSELL.com for tips on above floor cleaning tools.
Clean stairs or furniture easily with the tools provided. Pair your desired tool with the Hand Vacuum
or Extension Wand. Note: Ensure the vacuum is OFF when connecting tools.
1. To use as a Hand Vacuum,
press the release button
to disconnect it from the
Extension Wand.
2. Attach your chosen tool. 3. Use the tool to clean
furniture, stairs or other
surfaces in your home.
WARNING Do not use your vacuum until you are familiar with all instructions and operating procedures.
4 BISSELL.com
Emptying the Dirt Tank
More of a video person? Go to support.BISSELL.com for additional how-to videos.
1. Turn OFF your machine.
Remove the Dirt Tank from the
Hand Vacuum by pressing the
Tank Release Button on the
front of the tank.
4. Dump dirt from the tank
into the trash bin.
2. Grab the middle grip from
the filter and pull up. This will
activate a wiping feature to
remove debris from the mesh
filter screen. Twisting the grip
will remove the filter only.
5. Slide the separator back
into the tank, ensuring the
notch is seated into the tank
correctly.
3. Fully remove the separator
from the tank and tap the
mesh screen on the side of the
trash bin.
2
1
6. Put the whole tank into the
Hand Vacuum by guiding the
notched out area on the bottom
of the tank onto the hook on the
Hand Vacuum. Push into place.
WARNING Before using your vacuum, make sure that the Dirt Tank is in locked position and that the filter is in
place. DO NOT operate your vacuum without the filter.
BISSELL.com 5