Bissell 2831 Owner's Manual

CLEANVIEW® PET SLIM CORDED VACUUM

Series 2831

What’s in the Box? ............................................................. 2

Assembly .............................................................................. 3

Installing the Wall Mount & Tool Storage Station ... 3

Installing the Optional Febreze Filter ......................... 3

Using the Vacuum .............................................................. 4

Attaching Tools for Hand Vac Use ............................... 4

Emptying the Dirt Tank .................................................... 5

Cleaning & Replacing the Filter ..................................... 6

Maintaining the Pet TurboEraser® Tool.......................6

Maintaining the Brush Roll .............................................. 7

Troubleshooting ................................................................. 8

Warranty ...............................................................................8

Product Overview

1. Hand Vacuum

2. Power Switch

3. Tank Release Button

4. Dirt Tank

5. Hand Vacuum Release Button

6. Extension Wand

7. Foot Release Button

8. Tangle-Free Brush Roll

9. Motorized Floor Cleaning Foot

10. Cord Wrap

11. Foot Hose

Go online for a comprehensive walkthrough of your new purchase!

This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.com.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM.

When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

» Do not leave vacuum clea ner when it is plugged in. Unplug from

outlet when not in use and before ser vicing. » Do not use outdoors or on wet surfaces. » Do not allow to be used as a toy. Close attention is necess ary when

used by or near children. » Do not use for any purpose other than described in this us er guide.

Use only manufacturer’s recommended attachments. » Do not use with damaged cord or plug . If appliance is not working

as it should, has been dropped , damaged, left outdoors , or dropped

into water, have it repaired at an authorized s ervice center. » Do not pull or carry by cord, use cord as a handle, close a door

on cord, or pull cord around sharp edges or corners. Do not run

appliance over cord. Keep cord away from heated sur faces. » Do not unplug by pulling on cord. To unplug, grasp the plug, n ot

the cord. » Do not handle plug or vacuum cleaner with wet hands. » Do not put any object into openings. Do not use with any opening

blocked; keep openings free of dust, lint, hair, and anything that may

reduce air flow. » Keep hair, loose clothing, fingers, and all parts of body away from

openings and moving parts . » Turn OFF all controls before plugging or unplugging vacuum cleaner.

» Use extra care when cleaning on stairs . » Do not use to pick up flammable or combustible materials (lighter

fluid, gasoline, kerosene, etc.) or use in areas where they may be present.

» Do not use vacuum cleaner in an enclosed space filled with vapor s

given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.

» Do not use to pick up toxic material (chlorine bleach, ammonia, drain

cleaner, etc.).

» Do not pick up anything that is burning or smoking, such as

cigarettes, matches or hot ashes. » Do not use without filters in place. » Do not pi ck up hard or sharp obj ects such as glas s, nails, screws , coins, etc. » Use only on dry, indoor surface s. » Keep appliance on a level surface. » Do not carry the vacuum cleaner while it is running. » Unplug before connecting or disconnecting the TurboBrush® Tool. » Always connect to a polarized outlet (one slot is wider than the

other). Unplug from outlet when not in use and before conduc ting

maintenance. Do not modify the p olarized plug to fit a non-polarized

outlet or ex tension cord. » Plastic film can be dangerous . To avoid danger of suffocation, keep

away from children. » Any servicing other than what is recommended in this ins truction

manual sh ould be performed by an authorized service facility.

THIS APPLIANCE HAS A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contac t a qualified electrician to install a prop er outlet. Do not change the plug in any way.

SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.

What’s in the Box?

Standard accessories may vary by model.To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the underside of the insert inside the carton.

Hand Vacuum Extension Wand Foot Pet TurboEraser® Tool Crevice Tool

Dusting Brush Wall Mount & Tool

Storage Station

Certain t rademarks us ed under licens e from The Proc ter & Gamble Compa ny or its affilia tes.

2 BISSELL.com

Optional Febreze

Filter

Assembly

Go to support.BISSELL.com for assembly videos.

1. Connect the Extension Wand

to Motorized Floor Cleaning Foot. You’ll hear a “click” when they’re connected.

2. Connect the Hand Vacuum

to the Extension Wand. You’ll hear a “click” when they’re connected.

3. Wrap cord on the side of

the product where the cord clips are located.

Installing the Wall Mount & Tool Storage Station

Go to support.BISSELL.com for more tips and video instructions.

1. Insert tool holder on the

side of the wall mount.

2. Screw the wall mount into

a wall (a wall stud will provide best support). Ensure the mount is high enough up off the ground for the vacuum to hang comfortably.

3. Hang the vacuum on the

center storage piece and insert tools on the tool holder provided.

Installing the Optional Febreze Filter

Go to support.BISSELL.com for tips on maintaining and replacing your vacuum filter.

1. To change the filter, turn

OFF machine and remove Dirt Tank from the hand vacuum by pressing the Tank Release Button and sliding the tank out.

Certain t rademarks us ed under licens e from The Proc ter & Gamble Compa ny or its affilia tes.

2. Twist top to remove filter

frame from the separator. Remove the filter from the filter frame housing.

3. Replace with the Febreze

filter and reinstall the filter frame.

BISSELL.com 3

+ 5 hidden pages