Bissell 2505 User Manual

LITTLE GREEN®
PRO
_______________
USER GUIDE
2505
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR PORTABLE DEEP CLEANER.
When using an electrical appliance, basic precautions should be observed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
» Connect to a properly grounded
outlet only. See grounding instructions. Do not modify the 3-prong grounded plug.
» Do not leave appliance when
it is plugged in. Unplug from outlet when not in use and before servicing.
» Do not expose to rain.
Store indoors.
» Do not allow to be used as a toy.
Close attention is necessary when used by or near children.
» Do not use for any purpose
other than described in this user guide. Use only manufacturer’s recommended attachments.
» Do not use with damaged
cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
» Always install float before any
wet pick-up operation.
» Do not pull or carry by cord, use
cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
» Do not unplug by pulling on
cord. To unplug, grasp the plug, not the cord.
» Do not handle plug or appliance
with wet hands.
» Do not put any object into
openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
» Keep hair, loose clothing, fingers,
and all parts of body away from openings and moving parts.
» Turn off all controls before
plugging or unplugging appliance.
» Use extra care when cleaning
on stairs.
» Do not use to pick up flammable
or combustible materials (lighter fluid, gasoline, kerosine, etc.) or use in areas where they may be present.
» Do not use appliance in an
enclosed space filled with vapors given off by oil base paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
» Do not use to pick up toxic
material (chlorine bleach, ammonia, drain cleaner, etc.).
» Do not pick up anything that
is burning or smoking, such as cigarettes, matches, or hot ashes.
» Use only BISSELL cleaning
products intended for use with this appliance to prevent internal component damage. See the Cleaning Formula section of this
guide. » Keep appliance on a level surface. » Do not carry the appliance while
in use. » Do not immerse. Use only on
surfaces moistened by the
cleaning process
SAVE THESE INSTRUCTIONS FOR FUTURE USE
This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet with the same configuration as the plug. No plug adapter should be used with this appliance.
www.BISSELL.com
2
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Grounded Outlets
Grounding Pin
Thanks for buying a BISSELL portable deep cleaner!
We love to clean and we’re excited to share one of our innovative products with you. We want your portable deep cleaner to work like new for the years to come, so this guide has tips on using, maintaining, and if there is a problem, troubleshooting.
In just a few simple assembly steps, you’ll be ready to spot clean. Flip to the "Assembly" page and let’s get started!
Safety Instructions...........2
Product View ................4
Cleaning Formula............5
Operations ................7-8
Maintenance & Care .........9
Troubleshooting ............10
Warranty ....................11
Service ......................11
Product Registration ........ 12
Consumer Care.............12
www.BISSELL.com
3
Product View
Carry Handle
Power Button
Dirty Water Tank
Power Cord
Quick Release™ Cord Wrap
Cleaning Tool
Formula & Clean Water Tank
Flex Hose
www.BISSELL.com
4
Cleing Formula
Keep plenty of genuine BISSELL for portable deep cleaning machines on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL cleaning formulas.
WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine.
CARPET CLEANING FORMULA ENHANCER
Oxy Boost Pro Boost Prevent Boost
Removes old,
set-in stains
permanently
BOOST
Revives carpets
to look
its best
Repels stains from soaking
into carpet
fibers
Pet Oxy
Removes
pet stains
and odors
permanently
PROFESSIONAL
FORMULAS
Professional
Deep Cleaning
Outcleans all
other formulas
Includes
Scotchgard™
Protector
Professional
Pet Urine
Eliminator+Oxy
Our best formula
for pet urine
stains & odors
Includes
Scotchgard™
Protector
Pet Stain & Odor
Removes tough
Boost
pet stains
Includes
Scotchgard™
Protector
PRETREAT SPOTS AND STAINS TO IMPROVE
CARPET CLEANING PERFORMANCE
Oxy Stain Destroyer Pet Stain Pretreat
Permanent stain removal
in 30 seconds
PRETREAT
Pretreat to help remove
tough pet stains and odors
2X®* CLEANING FORMULA
Deep Clean
& Protect
Deep cleans
carpets
and protects from future stains with Scotchgard™
Protector
Deep Clean
+ Refresh
Powerful
cleaning with
a refreshing
scent
Deep Clean +
Removes deep
down dirt, pet
stains &
pet odor
Oxy
ONLY BISSELL Protects from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®. *2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non-concentrated formula.
www.BISSELL.com
5
Asmbly
Before you clean
1. Remove loose dirt and impediments
before deep cleaning.
2. Pretreating (optional): 2a. Pretreating is recommended to
improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways.
2b. BISSELL Stain Pretreat Spray any BISSELL Stain
Pretreat formula onto heavy traffic areas, soiled areas or stains.
Allow to penetrate for at least 3 minutes. Clean as normal, following the
instructions below.
Preparing the machine
1. Release Flex Hose by twisting the
Hose Secure Latch clockwise. Unwrap Flex Hose completely.
2. Attach the Large Stain Tool or Tough
Stain Tool to the Hose Grip until it snaps together. Make certain the tool is securely attached.
3. Twist the Quick Release™ Cord Wrap
clockwise to unwrap the power cord completely and plug into grounded outlet.
Filling the formula & water tank
1. Remove tank from the back of the
machine by lifting up Tank Carry Handle.
Note: This tank was designed with a flat bottom so it can be easily filled.
2. Unscrew the black cap and remove
bottle insert.
3. Fill tank with hot tap water (140° F/60° C
MAX) to the water fill line. Add 60 mL/2 oz of BISSELL 2X formula to the tank.
4. Replace the bottle insert in the tank and
tighten the black cap. Replace the tank on the machine.
WARNING
Do not plug in your cleaner until you have completely assembled it per the instructions and are familiar with all instructions and operating procedures.
NOTICE
Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area may aggravate this condition.
Make only one trip to the sink by bringing
Tip
the entire portable cleaner. Fill and empty in the same trip.
1.
2.
www.BISSELL.com
6
Operatis
Cleaning with your deep cleaner
1. Plug unit in and turn ON by pressing the
Power Button.
2.
Hold cleaning tool approximately 1 inch above soiled surface. Press Spray Trigger to apply cleaning solution to soiled area.
3.
Using the brush on the cleaning tool, gently scrub area to be cleaned.
4. For thorough cleaning, spray additional
solution while brush and suction are in contact with surface.
5.
Apply downward pressure on cleaning tool and pull it toward you. The suction will remove the dirt and cleaning solution. Continue until no more dirt can be removed.
6. As a final step, use “drying strokes” (by not
pressing the Spray Trigger) to remove as much liquid/moisture as possible. Repeat this step as often as necessary.
Cleaning with 3"/4"/6" Tool
1. Attach the 3”/4”/6” Tough Stain Tool to the
Flex Hose.
2. Press the Spray Trigger to mist solution over
and onto the soiled area.
3. Release Spray Trigger and gently scrub the
stain.
4. To lift the stain away, apply downward
pressure on the tool and slowly pull it toward you. Then use “drying strokes” (by not pressing down trigger) to remove remaining moisture. Repeat as needed.
WARNING
Keep spray away from face. Failure to do so may result in personal injury.
IMPORTANT
Check the manufacturer’s tag before cleaning upholstery. Test a small, hidden area for colorfastness. If color is aected, do not use. If manufacturer’s tag is missing or not coded, check with your furniture dealer.
Cleaning with Stain Trapper Tool*
*select models only
1.
Attach the Stain Trapper Tool to the end of the hose.
2. Slowly move the tool back and forth over the
stain. Be careful not to move the tool back and forth too quickly or soiled water will flow back into the hose.
3. To empty the tool, rotate the small tank on
the bottom of the tool to unlock it.
4. Dump dirty water into a sink or toilet and
rinse the tank out with clean water.
5. Replace the tank by lining up the locking
teeth with their mating slots (make sure the two teeth that are closest together are pointed toward the brush). Turn the tank to lock it into place.
www.BISSELL.com
7
Operatis
Cleaning with the Deep Stain/Reach Tool*
*select models only
1. Attach the Deep Stain/Reach Tool to the
Flex Hose.
2. Set the tool directly on top of the carpet
before pulling the Spray Trigger to inject formula deep into the carpet fibers.
Always keep the tool in direct contact with carpeting to avoid over-spraying.
www.BISSELL.com
8
Loading...
+ 16 hidden pages