Bissell 2233F User Manual

®

POWERFRESH
SLIM STEAM MOP

_______________

USER GUIDE

2233F SERIES

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.

Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance,
basic precautions should be observed, including the following:

» Do not use appliance in an enclosed space filled with vapours

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY:

» This appliance is not intended for use by persons

(including children) with reduced physical, sensory,
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.

» Children should be supervised to ensure that they

do not play with the appliance.

» Keep hair, loose clothing, fingers, and all parts of

body away from openings and moving parts of
the appliance and its accessories.

» Unplug from electrical socket when not in use,

before cleaning, maintaining, or servicing the
appliance, and if your appliance has an accessory
tool with a moving brush, before connecting or
disconnecting the tool.

» If the supply cable is damaged, it must be replaced

by the manufacturer, its service agent, or similarly
qualified person in order to avoid a hazard.

» Do not run appliance over cable.

» Plastic film can be dangerous. To avoid danger of suffocation,

keep away from children.
» Use only as described in this user guide.
» Use only manufacturer’s recommended attachments.
» Do not immerse in water or liquid.
» If appliance is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water; do not attempt

to operate it and have it repaired at an authorised service center.
» Do not put any object into openings.
» Do not use with any opening blocked; keep free of dust, lint, hair,

and anything that may reduce air flow.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible liquids, such as

petroleum, or use in areas where they may be present.
» Do not pick up toxic material (chlorine bleach, ammonia, drain

cleaner, etc.).

given off by oil base paint, paint thinner, some moth-proofing
substances, flammable dust, or other explosive or toxic vapours.

» Do not pick up hard or sharp objects such as glass, nails, screws,

coins, etc.
» Keep appliance on a level surface.
» Do not pick up anything that is burning or smoking, such as

cigarettes, matches, or hot ashes.
» If your appliance has a motorized brush roll, do not leave

machine running in the same spot without the handle fully

upright.
» Do not leave appliance when plugged in.
» Do not use with damaged cable or plug.
» Do not pull or carry by cable, use cable as a handle, close door

on cable, or pull cable around sharp edges or corners.
» Keep cable away from heated surfaces.
» To unplug, grasp the plug, not the cable.
» Do not handle plug or appliance with wet hands.
» Turn off all controls before unplugging.
» Hold plug when rewinding onto cable reel. Do not allow plug to

whip when rewinding.
» Do not use outdoors or on wet surfaces.
» Always connect to a properly earthed electrical socket.
» The appliance is not to be used if it has been dropped, if there

are visible signs of damage or if it is leaking.
» Keep the appliance out of reach of children when it is energised

or cooling down.
» The foot surfaces are liable to get hot during use.
» Do not direct steam at people, animals, or equipment containing

electrical components.
» Do not use on leather, wax polished furniture or floors, synthetic

fabrics, velvet, or other delicate, steam-sensitive materials.
» Always turn OFF vacuum mode if you encounter liquid on the

floor.
» Do not leave the appliance unattended while it is connected to

the supply mains.
» Do not open the filling aperture during use.

WARNING

SURFACE MAY BE HOT. AVOID CONTACT.

THIS SYMBOL MEANS

WARNING: DANGER OF SCALDING

SAVE THESE INSTRUCTIONS

FOR OPERATION ON A 220-240 VOLT A.C. 50-60 HZ POWER SUPPLY ONLY.

This model is for household use only.

www.BISSELL.com

2

Thanks for buying a BISSELL
PowerFresh® Slim Steam Mop

Your steam mop needs a little assembly before you can put it to work,
so flip to page 5 and let’s get started!

Safety Instructions...........2

Product View ................4

Assembly ...................5

Operations ...............6-10

What’s In The Box?

Handheld

Pod

Tool Box with

Tools

Wall Mount &

Screws

Brass Bristle

Brush

(comes in toolbox)

Grout

Tool

(comes in toolbox)

Maintenance & Care ......11-13

Troubleshooting ............14

Guarantee..................15

Service .....................15

Mop Pad

Foot

Flat Scraper

Tool

(comes in toolbox)

Concentrator Tool

White Mop

Pad

Angle

(comes in toolbox)

Scrubby Mop

Pad

Water

Cup

Extension

Wand

www.BISSELL.com

3

Getting to Know Your Steam Mop

PAUSE

HI Steam

LOW Steam

1

2

3

4

5

8

7

6

11

12

9

10

1 SmartSet Steam Control

2 Easy Fill Water Tank

3 Handheld Pod Release Button

4 Power Cable with Wrap Strap

5 Extension Wand

6 Handheld Pod

NOTE: Tool Box stores Brass Bristle Brush, Angle Concentrator Tool, Grout Tool, and Flat
Scraper Tool.

4

www.BISSELL.com

7 Steam Trigger

8 Wall Mount Storage Clip Area

9 Extension Wand Release Pedal

10 Mop Pad Foot

11 Wall Mount

12 Tool Box

Assembly

WARNING

Do not plug in your PowerFresh® Slim Steam Mop until you are familiar with all instructions and
operating procedures.

Your BISSELL PowerFresh® Slim Steam
Mop assembles quickly and easily. It is
packaged with the following items:

1

Attach the Extension
Wand to the Mop Pad
Foot by snapping it
into place.

click

3

• Handheld Pod

• Extension Wand

• Mop Pad Foot

2

click

4

Then, insert the
Handheld Pod to the
Extension Wand until
it clicks into place.

Attach the tool box to the Handheld Pod by
aligning the clip on the back side of the Tool
Box to the opening on the bottom of the
Handheld Pod and slide down into place.

NOTE: For instructions on attaching the Wall Mount and Storage, please refer to page 12.

Wrap the cable around the palm of
your hand into a circle. Then, place
the wrap strap around the cable
and back onto itself to secure.

WARNING

Never put descaling aromatic, alcoholic, or detergent products into the steam cleaner, as this may
damage it or make it unsafe for use. Tinted plates on foot may get hot while steam mop is in use. Do not
touch while hot. Upright storage of the PowerFresh® Slim Steam Mop with a wet mop pad may result in
the formation of white marks on your floor. To remove the white marks, clean area with vinegar.

www.BISSELL.com

5

Filling Your Water Tank

1

The Water Tank
is located on
the top of the
Handheld Pod.

2

Pull the Water
Tank cap straight
up to open.

3

Use Water Cup provided and fill with distilled
or demineralized water, recommended in
place of tap water.

Close the Water Tank cap after filling.

A few notes about filling the Water Tank:

• The Water Tank’s capacity is 350 mL (12 oz).

DO NOT USE CHEMICALS IN THE WATER TANK OF YOUR POWERFRESH®
SLIM STEAM MOP.

• Other solutions may harm the machine and void the guarantee.

NOTE: Use of distilled water or demineralized water is recommended to prolong the life
of your steam mop. To add a fresh scent as you clean, try BISSELL demineralized waters
in various scents like Citrus, Eucalyptus Mint, and Spring Breeze.

NOTE: Never put descaling, alcoholic, eucalyptus oil, or detergent products into the
steam cleaner, as this may damage it or make it unsafe for use.

Attaching Microfibre Mop Pads

Your PowerFresh® Slim Steam

1

Mop may have come with two
different pads.

White

Mop Pad

The White Mop Pad is best for everyday
use on delicate flooring like sealed
hardwoods and laminate. The Scrubby
Mop Pad is recommended for durable
surfaces like tile.

www.BISSELL.com

6

Scrubby

Mop Pad

2

To attach Mop Pad, wrap Mop Pad
around the bottom of the foot, making
sure the gray stitching is located on
the front of the foot and the Quick Grip
Release™ Tab is located on the back.

Using SmartSet™ Steam Control

1

Plug machine into a
properly grounded outlet.

4

Now, select a desired steam level based on your
cleaning needs.

2

When the unit is plugged
in, the STEAM READY
light will start to blink.

3

After 30 seconds, the
STEAM READY light will
turn to a solid light. This
means the steam mop is
heated and ready to use.

5

Push the HI STEAM
button once to turn ON.
Use HI STEAM when
cleaning durable floors
or sticky messes.

NOTE: You must wait until the STEAM READY light is a solid colour before selecting your
desired steam level. Upon the first use of your steam mop or first use after refilling the
Water Tank, the pump may make a “knocking” sound. This is normal and will diminish
after a few seconds.

Push the LOW STEAM
button once to turn ON.
Use LOW STEAM for
delicate floors or for
light, everyday cleaning.

To turn steam OFF, press
the PAUSE button once.

www.BISSELL.com

7

Cleaning Your Hard Floors

NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning with the

PowerFresh® Slim Steam Mop.

YOUR STEAM MOP IS DESIGNED TO CLEAN HARD FLOORING SUCH AS CERAMIC
TILE, LAMINATE, MARBLE, STONE, AND SEALED HARDWOOD FLOORS. USE OF YOUR
STEAM MOP ON WAXED OR SOME UNWAXED FLOORS MAY RESULT IN A DIMINISHED
GLOSSINESS. THE STEAM MOP IS NOT FOR USE ON UNSEALED FLOORS. FOR BEST
RESULTS, TEST IN AN INCONSPICUOUS AREA AND CHECK THE CARE INSTRUCTIONS
FROM YOUR FLOORING MANUFACTURER. DON’T STAND STATIONARY AND KEEP THE
MOP MOVING WHEN DISPENSING STEAM.

1

Plug machine
into a properly
grounded outlet.

NOTE: Your Steam Mop may have already come assembled with a Mop Pad on the foot.
If not, refer to instructions on page 6 in the “Attaching Microfibre Mop Pads” section to
learn how to attach the Mop Pad.

4

Push the trigger
underneath the handle
of the Handheld Pod
to release steam.

2

Make sure the STEAM READY
light is solid before selecting the
appropriate steam level based on
your hard floor cleaning needs.

5

To easily manoeuvre and clean
tight spaces such as baseboards,
behind the toilet, and around
furniture, take advantage of the
swivel steering.

3

Step on the side of
the foot to recline the
body of the machine
to begin cleaning.

6

www.BISSELL.com

8

For best results to
sanitize an area of your
floor, use the microfibre
cloth pads and slowly
and evenly stroke your
steam mop back and
forth at least three
times over the area
using continuous steam.
Remove the pad after
use and wash.

7

When finished cleaning, turn
off the machine by pressing
the PAUSE button and
unplugging the unit.

Above Floor Cleaning

Your BISSELL PowerFresh® Slim Steam Mop has the ability to clean above floors
or in tight spaces when using the Extension Wand. It also has the convenience
of converting into a handheld steamer when removing the Extension Wand.

1

2

3

30

Wait 30 seconds before
changing from mopping
to the handheld feature
or disconnecting a tool
from the Handheld Pod or
Extension Wand, make sure
steam is no longer coming
from the nozzle by releasing
the trigger and pressing the
PAUSE button.

NOTE: Do not step on the back pedal to recline the unit. When removing the Extension
Wand from the foot, make sure to lift away from your body as the bottom of the wand
may release steam.

4

Align arrow on tool to arrow on end of
nozzle (on Extension Wand or handheld
steamer) and twist tool into place.

To clean above floors
using the Extension
Wand, step down on
the pedal located on the
back of the steam mop
and lift up to release the
Extension Wand.

5

Attach desired tool to end of Extension
Wand to clean above floors and hard to reach
areas such as ceilings, showers, baseboards,
and sliding door tracks.

Be sure the desired steam
setting is selected, then
push the trigger located
under the handle of the
Handheld Pod to release
steam.

6

To convert the
steam mop into a
handheld steamer,
push the release
button on top
of the Extension
Wand and lift
up to detach the
Handheld Pod
from the Extension
Wand.

7

Cleaning Without Tools:

Push the trigger located
under the handle of the
Handheld Pod to release
steam from the end of
the Handheld Pod.

8

Cleaning With Tools:

Make sure steam is no
longer coming from the
nozzle by releasing the
trigger and pressing the
PAUSE button. Then
connect the desired tool.

www.BISSELL.com

9

Above Floor Cleaning (continued)

Based on your cleaning needs, connect desired tool to the end of the Extension

8

Wand or the Handheld Pod. Select cleaning tools are included with this model.

Use the Flat
Scraping Tool to
steam and scrape
off those sticky
messes on floors,
countertops, etc.

Use the Grout
Too l to remove
dirt and grime
from grout.

Use the Mop Pad
Foot to steam
larger areas such
as shower walls,
countertops,
stairs, etc.

NOTE: Additional tools are available for purchase on BISSELL.com.au.

Use the Angle Concentrator Tool to
steam clean hard-to-reach corners and
crevices where dirt and grime build-up
in the home, like sinks and faucets.

Use the Green Bristle Brush to clean
around stove tops, sinks, showers, etc.

9

When finished
cleaning, turn OFF the
machine by pressing
the PAUSE button and
unplug the unit.

CAUTION: Let steam cool down before removing tools. The end of the Extension Wand
or Handheld Pod will be hot.

11

Insert foot back
into the end of the
Extension Wand until
it clicks into place.

10

Wait for the steam to stop, then remove tools
from the Extension Wand and/or Handheld
Pod before reassembling your machine.

12

Then, insert the
Handheld Pod back
into the Extension
Wand until it clicks
into place.

click

click

www.BISSELL.com

10

Cleaning Your Steam Mop

WARNING

To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.

1

2

3

Carefully remove Mop
Pad using the Quick

Turn machine OFF
and unplug from the
grounded outlet.

4

Wrap the cable around the palm of
your hand into a circle. Then, place the
wrap strap around the cable and back
onto itself to secure.

NOTE: Unit does not stand up on its own. If you are not using the Wall Mount, make sure
your Steam Mop is stored in a safe place, in the upright position against a firm surface to
prevent from falling over.

Grip Release Tab from
the mop head.

NOTE: Mop Pad and lower
assembly may be hot.

5

Store on the Wall Mount that is securely
mounted to a wall in a protected, dry
area. Store with dry Mop Pads as wet
Mop Pads may damage wood and other
delicate hard floors.

Mop Pads can be machine
washed in warm water.
Use only non-bleach
liquid detergents. Do not
use fabric softeners or
bleach. For best results,
air dry.

www.BISSELL.com

11

Setting Up The Wall Mount

WARNING

To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.

A Phillips-head screwdriver is needed to install the Wall Mount. If
installing onto drywall, use plastic anchors with provided screws.

1

Place the Wall Mount against the wall in the area where
you’ve determined you would like to store your machine.

2

Place each screw through the two holes
in the Wall Mount. Use a screwdriver or
drill to affix to the wall.

3

Find the clip on the
back of the Tool
Box and hook it into
the right side of the
Wall Mount.

www.BISSELL.com

12

Using The Wall Mount Storage

WARNING

To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.

Your BISSELL PowerFresh® Slim Steam Mop can be stored in 2 different ways
using the Wall Mount.

OPTION 1:

1

Find the opening on the
back of the Handheld Pod
and hook it onto the top
lip of the Wall Mount.

OPTION 2:

1

2

Bend the Mop Pad Foot
downward in a slanted
position.

2

3

Hang the power cable
and tool bag on the left­side hook.

3

Detach the Extension
Wand from Handheld Pod.

4

Clip the Extension
Wand into the holder.

Find the
opening on
the back of
the Handheld
Pod and hook
it onto the top
lip of the Wall
Mount.

Bend the Mop Pad Foot
downward in a slanted
position.

5

Hang the power
cable and tool
bag on the left­side hook.

www.BISSELL.com

13

Troubleshooting

WARNING

To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.

Problem Possible causes Remedies

Water Tank empty. Refill tank.

Reduced
steam OR
no steam

Streaking

Leaking

Knocking
noise

Steam level not selected. Select steam level by pushing steam

Wand not installed properly. Push the wand all the way into the

Foot not installed properly. Insert the Extension Wand into foot

PAUSE button is pressed. Once STEAM READY light is solid,

Dirty Mop Pad. Remove and wash Mop Pad per

Use on waxed or oiled floor. If you have used floor polishes or

Mop Pad is too wet. Remove and replace with dry Mop

Steam level is too high. Lower the steam level.

Crack in unit or Water Tank. Check to see if there are any cracks

First use or Water Tank is empty. Fill Water Tank and knocking will

Metal tube cannot reach water. Shake the pod to let the tube reach

level button.

handheld pod until you hear a click.

until you hear a click.

select desired steam level (HI or
LO) then push the trigger under
the handle of the Handheld Pod to
release steam.

instructions before further use.

wax on your floors, steam products
may decrease glossiness. Refer to
the wax or polish manufacturer. If
you don’t wax or polish your floors,
check the floor care instructions
from your flooring manufacturer.

Pad and intermittently press the
steam trigger for less steam.

on the unit or tank and check to
make sure the rubber gasket on
the tank is still attached and seated
properly in the unit.

diminish after a few seconds.

the water level.

www.BISSELL.com

14

Csumer Guare

This Guarantee gives you specific legal rights, in addition to rights
you may have under the Australian Consumer Law. If you need
additional instruction regarding this Guarantee or have questions
regarding what it may cover, please contact your local BISSELL
Consumer Services on the details set out below.

Limited 2 Year Guarantee
(from the date of purchase by
original purchaser)

Subject to the *CONDITIONS identified below, BISSELL will repair or
replace (with new, refurbished, lightly used, or remanufactured
components or products), at BISSELL’s option, free of charge, any
defective or malfunctioning part due to manufacturer defect. This
Guarantee applies to product used for personal purposes, and not
commercial or rental service. This Guarantee does not apply to
fans or routine maintenance or consumable components such as
filters, belts, brush rolls, etc., damage or malfunction caused by
negligence, abuse, neglect, unauthorised repair, or any other use
not in accordance with the user’s guide. BISSELL recommends that
the original packaging be kept for the duration of the Guarantee
period in case such need arises within the Guarantee period that
the item needs re-packing and transportation.

*CONDITIONS OF THE GUARANTEE

Subject to whether such loss is reasonably foreseeable, BISSELL and
its in-country distributors are not liable for incidental or consequential
damages of any nature associated with the use of this product.

FOR AUSTRALIAN CONSUMERS ONLY:

OUR GOODS COME WITH GUARANTEES THAT CANNOT BE EXCLUDED
UNDER THE AUSTRALIAN CONSUMER LAW. YOU ARE ENTITLED TO
A REPLACEMENT OR REFUND FOR A MAJOR FAILURE AND FOR
COMPENSATION FOR ANY OTHER REASONABLY FORESEEABLE LOSS OR
DAMAGE. YOU ARE ALSO ENTITLED TO HAVE THE GOODS REPAIRED OR
REPLACED IF THE GOODS FAIL TO BE OF ACCEPTABLE QUALITY AND THE
FAILURE DOES NOT AMOUNT TO A MAJOR FAILURE.

THIS GUARANTEE IS IN ADDITION TO OTHER RIGHTS OR REMEDIES
UNDER LAW. NOTHING IN THIS GUARANTEE EXCLUDES, LIMITS, OR
MODIFIES ANY LIABILITY OF BISSELL WHICH IS IMPOSED BY LAW, OR
LIMITS OR MODIFIES ANY REMEDY AVAILABLE TO THE CONSUMER
WHICH IS GRANTED BY LAW. TO MAKE A CLAIM UNDER THIS
GUARANTEE CONTACT BISSELL AUSTRALIA PTY LTD (DETAILS ABOVE).
CONTACT BISSELL PRIOR TO RETURNING ANY GOODS. WHERE AGREED,
BISSELL WILL REIMBUSE REASONABLE POSTAGE / HANDLING COSTS
(IF ANY) FOR RETURNING GOODS TO BISSELL. TO CLAIM EXPENSES
INCURRED IN MAKING A CLAIM UNDER THIS GUARANTEE PLEASE
PROVIDE BISSELL WITH A COPY OF THE RECEIPT OF THE EXPENSES BY
EMAIL OR POST.

Csumer Care

If your BISSELL product should
require service or to claim under our
limited guarantee, please contact us
as follows:

Website and Email:

www.bissell.com.au
www.bissell.co.nz

Telephone:

Australia: 1300-247-735
New Zealand: 0800-247-735

Write:

BISSELL AUSTRALIA PTY LIMITED
42 Rocco Dr.
Scoresby 3179
Victoria
Australia

Replacement parts and accessories are
available for purchase. To purchase visit
www.BISSELL.com.au.

Visit the BISSELL website: www.BISSELL.com.au

When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: _____________ Please record your Purchase Date: _____________

NOTE: Please keep your original sales receipt. It provides proof of the date
of purchase in the event of a Guarantee claim. See Guarantee for details.

www.BISSELL.com

15

16

©2018 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 161-4140 04/18 RevB
Visit our website at: www.BISSELL.com