
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE
USING YOUR MULTI-SURFACE CLEANER.
When using an electrical appliance, basic precautions should be
observed, including the following.
WARNING
ALWAYS CONNECT TO A PROPERLY EARTHED
ELECTRICAL SOCKET.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY:
» Unplug from electrical socket when not in use
and before cleaning, maintaining or servicing the
appliance.
» This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
Cleaning and user maintenance shall not be made by
children without supervision.
» Children should be supervised to ensure that they do
not play with the appliance.
» If the supply cable is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
» Do not run appliance over cable.
» Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts of the
appliance and its accessories.
» Use only the type and amount of liquids specified
under the Operations section of this guide.
» Do not leave appliance when plugged in.
» Do not modify earthed plug.
» Brush may start unexpectedly. Unplug before
cleaning or servicing.
» Do not expose to rain. Store indoors.
» Do not allow to be used as a toy.
» Use only as described in the User Guide.
» Use only manufacturer’s recommended attachments.
» Do not use with damaged cable or plug.
» Do not immerse in water or liquid.
» If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water; do not attempt to operate it and have it
repaired at an authorised service center.
» Liquid must not be directed towards equipment
containing electrical components.
» Do not pull or carry by cable, use cable as a handle,
close door on cable, or pull cable around sharp edges
or corners.
» Keep cable away from heated surfaces.
» Do not unplug by pulling on cable.
» To unplug, grasp the plug, not the cable.
» Do not handle plug or appliance with wet hands.
» Do not put any object into openings.
» Do not use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce air flow.
» Turn off all controls before unplugging.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible
liquids, such as petrol, or use in areas where they may
be present.
» Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
» Do not use appliance in an enclosed space filled
with vapors given off by oil base paint, some moth-
proofing substances, flammable dust, or other
explosive or toxic vapors.
» Do not pick up hard or sharp objects such as glass,
nails, screws, coins, etc.
» Keep appliance on a level surface.
WARNING
TO REDUCE THE RISK OF INJURY FROM MOVING
PARTS, CORRECTLY ASSEMBLE THE BRUSH
WINDOW IN PLACE BEFORE OPERATION.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, USE INDOORS ONLY . DO NOT IMMERSE. USE
ONLY ON SURFACES MOISTENED BY THE CLEANING
PROCESS. USE ONLY BISSELL CLEANING PRODUCTS
INTENDED FOR USE WITH THIS MACHINE.
WARNING
TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, ALWAYS INSTALL FLOAT STACK
BEFORE ANY WET PICK-UP OPERATION.
CAUTION
THE MULTI-SURFACE CLEANER HANDLE
CONTAINS ELECTRICAL CONNECTIONS AND IS
NOT A SERVICEABLE PART.
SAVE THESE INSTRUCTIONS
FOR OPERATION ON A 220-240 VOLT A.C. 50-60 HZ POWER SUPPLY ONLY.
This model is for household use only.
www.BISSELL.com
2

Thanks for buying a BISSELL
CrossWave® Pet
We love to clean and we’re excited to share one of our innovative
products with you. We want to make sure your multi-surface cleaner
works as well in two years as it does today, so this guide has tips on
using (pages 6-8), maintaining (pages 9-13), and if there is a problem,
troubleshooting (page 14).
Your multi-surface cleaner needs a little assembly before you can put it
to work, so flip to page 5 and let’s get started!
What’s In The Box?
Brush Roll Drying
Handle Multi-Surface
Body
Safety Instructions...........2
Product View ................4
Assembly ...................5
Cleaning Formulas...........5
Operations ................6-8
Tray with Rinse
Funnel
Tangle-Free
Brush Roll
Maintenance & Care ......9-13
Troubleshooting ............14
Guarantee..................15
Service .....................15
Rinse and
Storage Tray
Vacuum Filter
Rinse Cup
Multi-Surface Pet
with Ambipur®
Formula
www.BISSELL.com
3

Getting to Know Your CrossWave® Pet
1
2
9
10
11
6
12
3
7
4
13
5
8
14
1 Upper Handle
2 SmartClean™ Fingertip Controls
3 Strainer
4 Float Stack
5 Easy Remove Brush Window
6 Integrated Carry Handle
7 Dirty Water Tank
Your BISSELL CrossWave® Pet machine comes
in three easy to assemble components and does
not require any tools to assemble. The unit also
comes with a three-piece Rinse and Storage Tray.
www.BISSELL.com
4
8 Foot
9 Solution Spray Trigger
10 Quick Release Cable Wrap
11 Clean Water Tank
12 Lower Cable Wrap
13 Rinse Cup
14 Rinse and Storage Tray
• Handle
• Body
• Clean Water Tank
• Rinse and Storage Tray
• Brush Roll Drying Tray with Rinse Cup

Assembly
WARNING
Do not plug in your CrossWave® Pet until you are familiar with all instructions
and operating procedures.
1
Insert Handle
into body of
unit until you
hear a click.
2
click
4
Then, on the back
of the machine,
align Clean Water
Tank with the
grooves and slide
tank into place
until you hear a
click.
The multi-functional Rinse and Storage Tray includes
a Machine Storage Tray, Brush Roll Drying Tray with
Rinse Funnel, and Rinse Cup. To assemble, slide the
over hang in the middle of the Brush Roll Drying
Tray with Rinse Funnel down into the opening on
the Storage Tray that is indicated with arrows. Then,
place the Rinse Cup into the Rinse Funnel.
3
Wrap the cable around
the Quick Release Cable
Wrap and the Lower
Cable Wrap.
NOTE: To easily unwrap the cable for use, just turn the Quick Release Cable Wrap
downward to remove the cable from the cable wrap.
Cleaning Formulas
WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only
BISSELL cleaning formula intended for use with the hard floor device.
Keep plenty of BISSELL
formulas on hand so you
can clean your hard floors
and area rugs whenever it
fits your schedule.
Always use CrossWave®
formulas in your machine.
Other solutions may harm
the machine and void the
guarantee.
Multi-Surface
Formula
Great for cleaning
ALL sealed floors
and area rugs
Ambipur a nd related tradem arks are owned by the Pro cter & Gamble Comp any, Cincinnati, Ohio a nd used
under license by BISSELL Homecare, Inc.
CROSSWAVE® FORMULAS
Wood Floor
Formula
Restore your wood
floors’ natural shine
Area Rug Formula
Removes stuck-on
and embedded dirt
from area rugs
www.BISSELL.com
Multi-Surface Pet
with Ambipur®
Formula
Removes pet odors
to clean and refresh
5