Bissell 10N6 User Manual
Pet Hair Eraser
M u l t i C y c l o n i c V a c u u m
U S E R ’ S G U I D E
1 0 N 6 S E R I E S 2 2 0 - 2 4 0 V
3
Safety Instructions
4
Product View
5-6
Assembly
6-10
Operations
11-16
Maintenance and Care
16-17
Troubleshooting
™
18
Consumer Services
19
Replacement Parts
19
Additional Accessories
20
Warranty
Thanks for buying a BISSELL Vacuum
We’re glad you purchased a BISSELL vacuum. Everything we know about
floor care went into the design and construction of this complete,
high-tech home cleaning system.
Your BISSELL vacuum is well made, and we back it with a limited one
year warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem, you’ll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your BISSELL vacuum .
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President & CEO
2
w w w . b i s s e l l . c o m
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical
basic precautions should be observed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
CANISTER VACUUM.
WARNING: To reduce
the risk of fire, electric shock,
or injury:
■
Use indoors only.
■
For dry pick up only.
■
Do not leave machine when it is plugged in.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water, return it to a service agent.
■
Do not handle unit with wet hands.
■
Do not pull or carry by cord, use cord as a handle,
close door on cord, pull cord around sharp corners
or edges, run appliance over cord, or expose cord to
heated surfaces.
■
Do not unplug by pulling on cord. Unplug by
grasping plug.
■
Do not run appliance over cord.
■
Do not handle plug or appliance with wet hands.
■
Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts.
■
Do not pick up hot or burning objects such as
cigarettes, matches, or hot ashes.
■
Do not pick up flammable or combustible materials
(lighter fluid, petrol, kerosene, etc.) or use in the
presence of explosive liquids or vapour.
■
Do not use appliance in an enclosed space filled with
vapours given off by oil base paint, paint
thinner, some moth proofing substances, flammable
dust, or other explosive or toxic vapours.
■
Not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety
■
Young children should be supervised to ensure that they
do not play with the appliance.
■
Unplug from outlet when not in use and before servicing.
■
Do not put any object into opening.
w w w . b i s s e l l . c o m
appliance,
■
Remove plug from electrical outlet before cleaning or
maintaining the appliance.
■
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent in order to
avoid a hazard.
■
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, petrol, etc.).
■
Do not use for any purpose other than described in
this User’s Guide.
■
Use only manufacturer’s recommended attachments.
■
Do not use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce air flow.
■
Keep appliance on a level surface.
■
Turn off all controls before unplugging.
■
Be extra careful when cleaning stairs.
■
This appliance is provided with double
insulation. Use only identical replacement parts.
■
Do not use without the dust bag and filters in
place.
■
Pay close attention when working
around children.
SAVE THESE
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
IMPORTANT
FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz
POWER SUPPLY ONLY.
If your appliance is fitted with a nonrewireable BS
1363 plug it must not be used unless a 13 amp (ASTA
approved to BS 1362) fuse is fitted in the carrier
contained in the plug. (Spares may be obtained from
your BISSELL supplier). If for any reason the plug is cut
off, it must be disposed of, as it is an electric shock
hazard should it be inserted into a mains socket.
3
Product view
Handle
TurboBrush
Pet
™
Carry Handle
Crevice Tool
Hose Clip
Stretch Hose
Dusting Brush/
Upholstery Tool
Quick Release™
Cord Wraps
Inner Cyclone
Upper Tank
Easy Empty
Dirt Container
Washable
Pre-Motor Filter
Headlight
Foot
Window
™
Wide Cleaning Foot
Twist ‘n Snap™
Hose
Power Switch
Extension Wand
Pet Contour
™
Tool
HEPA Media
Post Motor Filter
Lock ‘n Seal™ Lever
Handle Release
Pedal
Height Adjustment
Knob
Pet Hair
Lifter
Power
Cord
Hose
Wand
Quick
Release™
Cord Wraps
Hose Wand Base
w w w . b i s s e l l . c o m
4
Assembly
The only tool you’ll need to assemble your
vacuum cleaner is a Phillips screwdriver.
Attach handle to vacuum
1. Locate the handle and cord wrap. Remove
the screw packet taped to the handle.
2. Stand the vacuum upright and from the
rear of the unit, slide the base of the handle
firmly into the grooves at the top of the
vacuum body.
3. Ensure that the handle fits firmly to the
vacuum body. If there are any gaps, continue
to push firmly until the handle is secure.
4. Insert the provided screw into the existing
hole, attaching the handle to the body of the
vacuum. Tighten securely with a screwdriver.
CAUTION:
Do not plug in your
vacuum cleaner until
you are familiar with
all instructions and
operating procedures.
2.
4.
w w w . b i s s e l l . c o m
5
Assembly
Attach vacuum hose and tools
1. Attach the Twist ‘n Snap™ Hose by lining up
the tabs on the base with the corresponding
notches on the back of the vacuum as shown.
2. Turn the Twist ‘n Snap Hose to the right to
lock the hose into place.
3. Grasping the Quick Reach Handle, slide the
end of the Hose Wand onto the Hose Wand
Base. Snap the Hose into the Hose Clip.
NOTE: The vacuum will not operate effectively
unless the hose wand is firmly attached.
4. Slide the extension wand and crevice tool
into the storage clip on back of vacuum.
5. Slide the dusting brush/upholstery tool into
the storage clip on back of vacuum.
1.
Twist 'n
Snap Hose
8.
3.
7.
6. Attach the Pet Contour Tool to the back
7. Store TurboBrush Pet on the front of the
8. Flip the Pet Hair Lifter down until it clicks
Operations
Power switch
The Power Switch is located on the left side of
the vacuum. Push the rocker switch “ON” (I)
to vacuum, and “OFF” (O) when cleaning is
complete.
w w w . b i s s e l l . c o m
6
of the vacuum by inserting tool into
storage clip.
handle by lining up the TurboBrush base
with the base of the holder then push back
to snap into place.
into place on the front of the foot.
NOTE: Flip the Pet Hair Lifter down for carpeted
surfaces and up for non-carpeted surfaces (see
page 7 for more information).
Pet Hair Lifter
CAUTION:
Before using your vacuum,
make sure that the dirt
container is in the locked
position and that all filters
(pre-motor and HEPA postmotor) are in place. Do not
operate your vacuum
without these filters.
NOTICE:
For above floor cleaning, the floor
brush will continue to rotate but
is raised above floor. To prevent
carpet damage, do not lean on
the vacuum or let the powerfoot
tilt forward.
CAUTION:
To avoid personal injury
and to prevent the cleaner
from falling when cleaning
stairs, always place it at
the bottom of the stairs.
Loading...