Bissell 10N4 User Manual
2
Thank You
USER'S GUIDE
10N4 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Troubleshooting
Accessories
Consumer Care
3
4-5
6
7-12
13-15
16
17
20
Replacement Parts
Warranty
18
19
TM
www.bissell.com
Thanks for buying a BISSELL Lift-O™ Deep Cleaner
We’re glad you purchased a BISSELL Lift-Off deep cleaner. Everything we
know about floor care went into the innovative design and construction
of this complete, high-tech home cleaning system.
Your BISSELL Lift-Off deep cleaner is well made, and we back it with a
limited two year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL
is a global leader in the design, manufacture, and service of high quality
homecare products like your BISSELL Lift-Off deep cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman & CEO
2
www.bissell.com
IMPORTANT SAFETY INSTRUCTIONS
3
When using an electrical
appliance,
basic precautions should be observed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
DEEP CLEANER.
Always connect to a properly Earthed
outlet. Unplug from outlet when not in use
and before conducting maintenance or
troubleshooting.
WARNING: To
reduce the risk of fire,
electric shock, or injury:
■
Use indoors only
■
Do not immerse; use only on surfaces
moistened by cleaning process
■
Do not leave machine when it is plugged in
■
Do not service machine when it is plugged in
■
If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent in order to avoid a hazard
■
Do not use machine if it has been
dropped, damaged, left outdoors or
dropped into water
■
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces
■
Do not carry the appliance while in use
■
Do not unplug by pulling on cord; unplug
by grasping plug not the cord
■
Do not handle plug or appliance with
wet hands
■
Do not put any object into appliance openings,
use with blocked opening or restrict air flow
■
Do not expose hair, loose clothing, fingers
or body parts to openings or moving parts
■
Do not pick up hot or burning objects
■
Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene,
etc.) or use in the presence of explosive
liquids or vapours
■
Do not use appliance in an enclosed space
filled with vapours given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapours
■
Remove plug from electrical outlet before
cleaning or maintaining the appliance
■
Not intended for use by persons (including
children) with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person responsible for their safety
■
Young children should be supervised to ensure
that they do not play with the appliance
■
Do not pick up toxic material (chlorine
bleach, ammonia, drain cleaner, petrol, etc.)
■
Do not modify the Earthed plug
■
Do not use for any purpose other than
described in this User’s Guide
■
Use only manufacturer’s recommended
attachments
■
Use only cleaning products formulated
by BISSELL for use in this appliance to
prevent internal component damage
■
Keep openings free of dust, lint, hair, etc.
■
Keep appliance on a level surface
■
Turn off all controls before unplugging
■
Be extra careful when cleaning stairs
■
Pay close attention when working
around children
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE
This model is for household use only.
WARNING:
This appliance must be Earthed
.
IMPORTANT
FOR OPERATION ON A 220-240 VOLT
A.C. 50/60 Hz POWER SUPPLY ONLY.
If your appliance is fitted with a
nonrewireable BS 1363 plug it must not be
used unless a 13 amp (ASTA approved to BS
1362) fuse is fitted in the carrier contained
in the plug. (Spares may be obtained from
your BISSELL supplier). If for any reason the
plug is cut off, it must be disposed of, as it is
an electric shock hazard should it be inserted
into a 13 amp socket.
Dirty Tank
www.bissell.com
4
Power Cord
Heat
Indicator Light
Carry Handle
Upper Handle
Portable Spot
Cleaning Release
Pedal
Quick Release™
Cord Wrap
Formula &
Water Tank
Flex Hose
Removeable
Nozzle Assembly
EdgeSweep
™
Brushes
Product view
Power Button
www.bissell.com
Support Handle
Tool Storage
(select models)
Hose Secure
Latch
Tool Storage
Cord Clip
Recline Pedal
Product view
5
Cleaning formula
WARNING:
To reduce the risk of fire
and electric shock due
to internal component
damage, use only
BISSELL cleaning formulas
intended for use with the
deep cleaner.
Spray Trigger
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect
whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
Non-BISSELL cleaning formulas may harm the machine and will void the warranty.
709 mL BISSELL
2X Fibre
Cleansing
Advanced
Formula with
Scotchgard™
protector
#62E5-E
709 mL BISSELL
2X Multi-Allergen
Advanced
Formula with
Scotchgard™
protector
#89Q5-E
709 mL BISSELL
2X Pet Stain &
Odor Advanced
Formula with
Scotchgard™
protector
#99K5-E
709 mL BISSELL
2X Natural
Orange
Advanced
Formula with
Scotchgard™
protector
#83P3-E
709 mL BISSELL
2X Lavendar
Essence
Advanced
Formula with
Scotchgard™
protector
#34B5-E
651 mL
Tough Stain
Precleaner
#0400-E
www.bissell.com
Assembly
6
Your Lift-Off deep cleaner comes in
two easy to assemble components:
1. Upper handle
2. Portable spot cleaner/Base
The only tool you will need to
assemble your cleaner is a long
Phillips screwdriver.
1. Slide the upper handle onto the body
of the machine by guiding the 2 posts
on the body into the opening on the
upper handle.
2. Firmly holding the upper handle in
place, screw 2 screws into the marked
holes at an upward angle above the
support handle.
3. At an upward angle, screw the remaining
2 screws into the marked outermost holes
under the support handle.
4. Wrap power cord around Quick
Release Cord Wrap.
5. Wrap flex hose around the hose wrap
and secure with hose secure latch.
6. Align the product as image 4 shows
and firmly push down the portable spot
cleaner until it is secured on both sides.
7. Check latches on both sides to confirm
it is secured (5).
8. Snap attachment(s) into the back of unit.
NOTE: Portable spot cleaner must
be fully secure to operate in the
upright mode.
To further check if the portable
spot cleaner is secure, plug in
and turn on to verify that the
heat indicator light is illuminated.
If the heat indicator light does
not illuminate, release the pod
and re-secure by pushing firmly
until both sides snap into place.
WARNING:
Do not plug in your
cleaner until you have
completely assembled it
per the above instructions
and are familiar with
all instructions and
operating procedures.
1. 2.
1.
3.
5.
4.
2.
IMPORTANT
ASSEMBLY INSTRUCTIONS
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for assembly.
CORD
SIDE
HOSE
SIDE
Loading...