Bissell 1009 Owner's Manual

™

USER GUIDE

AEROSWIFT

1009 SERIES

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

To reduce The risk of fire, elecTric shock, or injury:

» Always connect to a polarized

outlet (one slot is wider than the other). Do not modify the polarized plug to fit a non-polarized outlet or extension cord.

» Do not leave vacuum cleaner

when it is plugged in. Unplug from outlet when not in use and before servicing.

» Do not use outdoors or on

wet surfaces.

» Do not allow to be used as a toy.

Close attention is necessary when used by or near children.

» Do not use for any purpose other

than described in this User’s Guide. Use only manufacturer’s recommended attachments.

» Do not use with damaged cord or

plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

» Do not pull or carry by cord, use

cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

» Do not unplug by pulling on

cord. To unplug, grasp the plug, not the cord.

» Do not handle plug or vacuum

cleaner with wet hands.

» Do not put any object into

openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

» Keep hair, loose clothing, fingers,

and all parts of body away from openings and moving parts.

» Turn off all controls before

plugging or unplugging vacuum cleaner.

» Use extra care when cleaning

on stairs.

» Do not use to pick up flammable

or combustible materials (lighter fluid, gasoline, kerosine, etc.) or use in areas where they may be present.

» Do not use vacuum cleaner in an

enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

» Do not use to pick up toxic

material (chlorine bleach, ammonia, drain cleaner, etc.).

» Do not pick up anything that is

burning or smoking, such as

cigarettes, matches, or hot ashes. » Do not use without filters in place. » Do not pick up hard or sharp

objects such as glass, nails, screws,

coins, etc. » Use only on dry, indoor surfaces. » Keep appliance on a level surface. » Do not carry the vacuum cleaner

while it is running. » Unplug before connecting

or disconnecting the

Turbobrush® Tool

SAVE THESE INSTRUCTIONS FOR FUTURE USE

This model is for household use only.

THIS APPLIANCE HAS A POLARIZED PLUG

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

www.BISSELL.com

800.237.7691

Th for buying a BISSELL vacuum

We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.

Your BISSELL vacuum is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL vacuum.

Thanks again, from all of us at BISSELL.

Safety Instructions...........2

Product View ................4

Assembly .................5-6

Operations ................6-7

Maintenance & Care ...... 8-12

Troubleshooting ............13

Replacement Parts .........14

Warranty ...................15

Consumer Care.............16

Product Registration ........16

Mark J. Bissell Chairman & CEO

www.BISSELL.com

800.237.7691

Product View

1 Quick Release Handle 2 TurboBrush® Tool 3 Crevice Tool 4 Tank Release Button 5 Stretch Hose 6 Carry Handle

WARNING

Plastic ﬁlm can be dangerous. To avoid danger of suocation, keep away from babies and children.

www.BISSELL.com

7 Extension Tool 8 Power Cord 9 Bottom Empty Dirt Bin 10 Filter Tray 11 Height Adjustment Knob 12 Quick Release Handle Lever

WARNING

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

800.237.7691

13 Combination Dusting/

Upholstery Tool 14 Hose Wand Base 15 Power Foot Pedal 16 Handle Release Lever

WARNING

To reduce the risk of electric shock, turn power switch o and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Asmbly

No tools required! Remove all protective plastic before assembly and operating.

Attach Quick Release Handle to Base

1. Locate vacuum handle and remove the

protective plastic overwrap.

NOTE: The plastic wrap will easily slide off the handle by removing the TurboBrush® Tool Clip.

2. With the Quick Release Lever in upright position – slide handle into base and push the lever down to lock handle into place.

Attach TurboBrush® Tool to Handle Clip

1. Locate the TurboBrush® Tool in the box and

remove the protective plastic wrap.

2. Snap the TurboBrush® Tool Clip to the handle.

3. Line up the back of the TurboBrush® to the

bottom of the clip - the top of the brush opening will rest over the bottom of the clip.

4. With the lower tool in position, push the top of the tool handle into the upper clip to secure.

Attach Vacuum Hose and Secure Tools

1. Insert the end of the hose into the hose

connector at the foot base inlet opening. Wrap the hose around the upper hose clip.

Note: Check that the tabbed end of the hose is connected and secured to the upper suction inlet. The vacuum will not operate properly unless the both hose ends are secure.

2. Check that the crevice tool is inserted into the

extension wand in the storage post on the side of the vacuum.

3. Place the combo dusting/upholstery brush on the storage post located on the back of the unit under the wand release lever.

4. Wrap power cord around the cord wraps for storage.

Crevice Tool

WARNING

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

TurboBrush® Tool

Combo Brush

Power Cord Wrap

www.BISSELL.com

800.237.7691

+ 11 hidden pages