SANIMotor
5.33in
135.4mm
5.33in
135.4mm
4.33in
110.0mm
4.33in
110.0mm
Ø
.44in
FOR 10mm BOLT
11.1mm
.79in
20.0mm
8.10in
205.8mm
.65in
16.6mm
1.61in
40.8mm
Ø
5.00in
127.00mm
Ø
.79in
20.0mm
.22in
5.5mm
6mm X 6mm KEY
2 ROUNDED ENDS
1.50in
38.1mm
4-PIN M12-TYPE
MALE RECEPTACLE
™
IP69K RATED INVERTER DUTY STAINLESS STEEL GEARMOTORS
For use in harsh environments and high pressure, high temperature
washdown environments.
AC PARALLEL
SHAFT
GEARMOTORS
34 Frame 230V VFD 3-Phase Inverter Duty
** Output torque is gear limited.
Rated Speed (RPM) Rated Torque (in-lbs) Amps
Part Number 6hz 60hz 90hz 6hz 60hz 90hz Input HP Gear Ratio Stages 6hz 60hz 90hz Shipping Wt.
017-160-0005 33.5 335 500 7 7 5 1/20 5 1 .27 .24 .19 10.5
017-160-0010 17.3 173 258 14 14 9 1/20 10 2 .27 .24 .19 10.5
017-160-0019 8.9 89 132 27 27 17 1/20 19 2 .27 .24 .19 10.5
017-160-0037 4.6 46 68 50 50 33 1/20 37 3 .27 .24 .19 10.5
017-160-0072 2.3 23 35 96 96 63 1/20 72 3 .27 .24 .19 10.5
017-160-0139 1.2 14 18 160** 160** 106** 1/20 139 4 .27 .24 .19 10.5
017-160-0271 0.6 7 10 160** 160** 160** 1/20 271 4 .24 .21 .17 10.5
49 Frame 230V VFD 3-Phase Inverter Duty
Rated Speed (RPM) Rated Torque (in-lbs) Amps
Part Number 6hz 60hz 90hz 6hz 60hz 90hz Input HP Gear Ratio Stages 6hz 60hz 90hz Shipping Wt.
017-260-0005 34.5 345 518 16 16 11 1/8 5 2 .55 .50 .44 19.5
017-260-0010 17.3 173 260 34 34 23 1/8 10 2 .55 .50 .44 19.5
017-260-0019 9.1 91 137 70 70 46 1/8 19 2 .55 .50 .44 19.5
017-260-0037 4.7 47 71 128 128 85 1/8 37 2 .55 .50 .44 19.5
017-260-0072 2.4 24 36 256 256 170 1/8 72 3 .55 .50 .44 19.5
017-260-0140 1.2 12 19 500** 500** 320** 1/8 140 3 .60 .50 .44 19.5
017-260-0221 0.8 8 12 500** 500** 500** 1/8 221 3 .60 .44 .40 19.5
SANIMotor™ 34 Frame
5mm X 5mm KEY
2 ROUNDED ENDS
Ø
.36in
9.1m m
FOR 8mm BOLT
Ø
3.50in
.65in
16.6mm
1.50in
38.1mm
88.4mm
16.6mm
127.00mm
.65in
1.00in
25.4mm
4-PIN M12-TYPE
MALE RECEPTACLE
SANIMotor™ 49 Frame
4-PIN M12-TYPE
MALE RECEPTACLE
Ø
5.00in
8.40in
213.3mm
8.10in
205.8mm
.22in
5.5mm
.22in
5.5mm
1.61in
40.8mm
6mm X 6mm KEY
2 ROUNDED ENDS
1.61in
40.8mm
.79in
Ø
20.0mm
.63in
Ø
16.0mm
19.1mm
.79in
20.0mm
.75in
Ø
11.1mm
FOR 10mm BOLT
.44in
4.33in
110.0mm
5.33in
135.4mm
3.15in
80.0mm
3.92in
99.6mm
80.0mm
4.33in
110.0mm
3.15in
5.33in
135.4mm
3.92in
99.6mm
28
Gear & Engineering Corp.
Product Features & Benefits
Motor Encapsulation
• Stator is encapsulated with a thermally conductive 2-part
epoxy. Heat dissipates better than a motor without
encapsulation, allowing use of TENV construction.
• Gearmotor is suited for use with variable frequency drives
in constant torque configuration from 6-60 Hz and constant
horsepower configuration from 60-90 Hz. Inverter Duty
wire is standard.
Gearmotor Encased in 304 Stainless Steel
• All exterior components are manufactured from 304
stainless steel to provide an exterior shell protecting
all interior components.
• Output shaft, supported by sealed ball bearings, is
made from 304 stainless steel.
• Laser marked permanent nameplate meets extreme
washdown rating.
Removable IP69K ABS Cordset
• Removable cordset has a stainless steel modular, multi-pin,
power connector.
Additional Information
Wiring diagram pages 88-91
UL Recognized Component
• Construction features meet UL 1004 and C22.2 #100 described
in E89715.
• Class Ft insultation system evaluated to UL 1449 described in
E199928.
• Class B temperature rise at 40°C rated ambient temperature
allows for use in elevated ambient conditions
Bison Geartrain
• Gear centers are precision machined on automated CNC mills.
• All rotating components supported with sealed ball bearings
from the motor to the output shaft.
• Gear pinions are the strongest in the industry, capable of
200% shock loading. Pinions are carburized creating a hard
outer surface for wear resistance and a durable inner base
to handle high torque loads.
• Geartrain lubricated with NSF H1 registered, DIN
51825 certified, high performance grease for food
processing applications.
AC PARALLEL
SHAFT
GEARMOTORS
Two part, spring loaded,
stainless steel and EPDM
triple lip shaft seal
Stainless steel cover
Gear cartridge: Modular geartrain incorporates sealed
ball bearings and is capable of high load conditions.
Food grade H1 grease is specified for maintenance
free lifetime lubrication.
EPDM O-rings
Stainless steel output shaft
with captured keyway
Stainless steel, o-ring sealed
hex bolts hold cover in place.
Laser marked
motor nameplate
Motor is encased within 304 stainless steel,
and encapsulated with a thermally conductive
2-part epoxy providing unequaled protection
against moisture and chemicals.
Removable IP69K
ABS cordset connects
to stainless steel
multipin connector.
230 V, 60/50 HZ,
inverter duty motor
Gear & Engineering Corp.
29
Loading...