Bison Gear & Engineering Powerstar Accessories Catalog
Accessories
Output Shaft Covers
Series
720 171-720-1000
725 171-725-1020
730 171-730-1000
Part #
Mounting Footplate
Series
720 P125-720-1000
725 P125-725-1000
730 P125-730-1000
Part #
Torque Arm
Series
720 P125-720-1030
725 P125-725-1030
730 P125-730-1030
Part #
Output Shaft Inserts
Series
720 P108-720-5000
725 P108-725-5000
730 P108-730-5000
Part #
Output Shaft Cover
The PowerSTAR® output shaft cover
provides protection against corrosion and
contamination in dirty environments.
Mounting Footplate
The PowerSTAR mounting plate
accessory allows the gearmotor to be
easily specied into your application by
mounting to any at surface.
Torque Arm
The PowerSTAR torque arm is a
mounting bracket that provides easy
application t on equipment where
space is limited.
Output Shaft Inserts
For even greater mounting versatility,
Bison offers standard carbon steel keyed
output shaft inserts for the PowerSTAR
product line.
Designed to be easily eld mounted on Bison PMDC motors, the speed control
TightDrive is mounted within an aluminum extrusin for superior heat dissipation. Easy
on/off control and 3 potentiometers provide settings for min/max RPM and current limit.
Tight Drive Motor Mounted Speed Control
Part Number Input Voltage Output
170-113-0003 115V 1 PH,
60 Hz
Voltage
90V DC 2.5 Amps 1/6 HP,
Max Current Max Output
Power
124 W
Enclosure
Rating
IP 30 Non-Reversible 1.37
Bison Encoder & Armature Shaft Extension
Bison Shaft Mount Encoder
Part Number Voltage Pulses Channels
P208-010-0012 5 12 1
P208-010-0030 5 30 1
P208-010-0100 5 100 1
P208-010-2030 5 30 2
Bison Shaft Mount Encoder (Required for mounting)
Part Number Dia. Length
108-100-0316 .184” 0.88’
Shaft Mount Encoder Armature Shaft Extension
TightDrive
Reversible? Form Factor
16
Loading...