OPTIONAL FOOTPLATE
746 Series Right Angle DC
UP TO 68 IN-LBS CONTINUOUS
The 746 Series is our smallest right angle offering, with
up to 68 in-lbs continuous torque, and is available in
both right and left shaft orientations.
Specifications
Gearhead
Gearing: Hardened steel worm
bronze gear
Housing: Precision machined die cast
aluminum
Lubrication: Lifetime oil bath, sealed and
o-ringed
Bearings: Ball and needle
Shafts: Hardened steel
Mounting: Base, any angle
Additional Information
RIGHT ANGLE
GEARMOTORS
Motor
Motor Type: Permanent magnet
Speed: Variable with appropriate
control (1.37 form factor max)
Rotation: Reversible
Bearings: Ball
Insulation: Class F
Enclosure: TENV
Finish: Gloss black powder coat
Wiring diagram pages 88-91
746 Series PMDC 90V or 130V
Part Number
Right Shaft Ext.
021-746-9060 30 43 68 1/15 60.0 224 0.77 7.5 B
021-746-9040 45 65 52 1/15 40.0 224 0.77 7.5 B
021-746-9030 59 85 41 1/15 30.0 224 0.77 7.5 B
021-746-9020 87 126 30 1/15 20.5 224 0.77 7.5 B
021-746-9015 120 173 26 1/15 15.5 222 0.77 7.5 B
021-746-9010 180 260 15 1/15 10.3 197 0.77 7.5 B
021-746-9005 360 520 9 1/15 5.0 197 0.77 7.5 B
Left Shaft Ext.
021-746-9360 30 43 68 1/15 60.0 224 0.77 7.5 B
021-746-9340 45 65 52 1/15 40.0 224 0.77 7.5 B
021-746-9330 59 85 41 1/15 30.0 224 0.77 7.5 B
021-746-9320 87 126 30 1/15 20.0 224 0.77 7.5 B
021-746-9315 120 173 26 1/15 15.0 222 0.77 7.5 B
021-746-9310 180 260 15 1/15 10.0 197 0.77 7.5 B
021-746-9305 360 520 9 1/15 5.0 197 0.77 7.5 B
* Maximum overhung load on center of output shaft. *** Units rated for 90V 1.37 form factor drive. May be run with 1.05 form factor drive at 130V.
Speed
90V RPM
Speed
130V RPM***
Torque (in-lbs) Input HP Gear Ratio OHL* Amps Shipping Wt. Brush
Optional Features
Mounting base kit for 746 Series
Part number: P125-746-0500
Junction box kit - Part numbers:
P198-100-9111
Other Options
• Accessory shaft
• Shaft-mount encoder
• Footplate
See pages 86-87 for additional
accessories
48
746 DC
2.81
2.58
2.68
Gear & Engineering Corp.
#10-32
TAP
(4) .34 DIA
2.94
8.83
OPTIONAL J-BOX
3.12
1.32
2.63
2.36
2.31
1.06
1.10
1.31
0.25-20
(4) PLACES
0.47
FLAT
1.21
2.59
2.25
0.94
0.50
3.37
Right hand ext. shown
Loading...