Bison Gear & Engineering 100 Series, 175 Series Catalog Page
AC PARALLEL
Specifications
Gearhead
Gearing: 100 Series:
1st-stage helical steel, balance
powdered metal or steel
175 Series:
SHAFT
GEARMOTORS
Housing: Precision machined die cast aluminum
Lubrication: Lifetime oil bath, sealed and gasketed
Bearings: Needle output
Shafts: Hardened steel
Mounting: Face or optional footplate (any angle)
1st-stage helical steel, balance heat
treated steel or powdered metal
Additional Information
100 Series PSC 115V
Part Number Speed (RPM)*** Torque (in-lbs) Input HP Gear Ratio Stages OHL* Amps Hz Shipping Wt.
016-102-1369 1.2 100** 1/80 1369.3 5 115 .30/.32 60/50 6.5
016-102-0702 2.3 100** 1/80 702.1 5 115 .30/.32 60/50 6.5
016-102-0362 4.5 100** 1/80 361.7 4 115 .30/.32 60/50 6.5
016-102-0186 8.8 76 1/80 185.5 4 85 .30/.32 60/50 6.5
016-101-0100 17 100** 1/20 95.5 3 150 .60 60 7.5
016-101-0072 22 100** 1/20 71.7 3 150 .60 60 7.5
016-101-0050 33 96 1/20 49.0 3 130 .60 60 7.5
016-101-0037 43 62 1/20 36.7 3 160 .60 60 7.5
016-101-0026 63 49 1/20 25.2 2 230 .60 60 7.5
016-101-0017 95 30 1/20 16.8 2 225 .60 60 7.5
016-101-0013 124 25 1/20 12.9 2 220 .60 60 7.5
016-101-0010 154 20 1/20 10.5 2 218 .60 60 7.5
016-101-0007 240 13 1/20 6.7 1 200 .60 60 7.5
016-101-0005 320 10 1/20 5.0 1 200 .60 60 7.5
100 & 175 Series Parallel Shaft AC
UP TO 170 IN-LBS CONTINUOUS
The 100 and 175 Series offer a wide speed range and many voltage
options
in an ultra-compact package.
Motor
Motor Type: Permanent split capacitor
and 3 phase
Rotation: Reversible
Insulation: Class B minimum
Finish: Gloss black powder coat
175 3-phase unpainted
Enclosure: Open 1/80 & 1/10 HP
TENV 1/20 HP
TEFC 1/12 HP
Wiring diagram pages 88-91
Features
• Included junction box
• Included capacitor on PSC units
• Rear shaft on PSC units
• 175-3 Phase IP 54 enclosure
Optional Features
• Power-off brake for PSC motors
• Footplate kit
Part number: P125-100-9998
See pages 86-87 for additional
accessories
34
107 Series 3-Phase Inverter Duty 230V
For more specifications see page 62
175 Series PSC 115V and 115/230V
Part Number Speed (RPM)*** Torque (in-lbs) Input HP Gear Ratio Stages OHL* Volts AC Amps Hz Shipping Wt.
016-175-1369 1.3 160** 1/20 1369.3 5 115 115/230 .32/.18 60/50 8.25
016-175-0702 2.5 130** 1/20 702.1 5 115 115/230 .33/.19 60/50 8.25
016-175-0362 4.5 155** 1/20 361.7 4 115 115/230 .38/.21 60/50 8.25
016-175-0186 8.8 170** 1/20 185.5 4 85 115/230 .46/.26 60/50 8.25
016-175-0096 17 150** 1/20 95.5 3 150 115/230 .56/.29 60/50 8.25
016-175-0049 33 165 1/10 49.1 3 130 115 1.05 60 10
016-175-0025 63 90 1/10 25.2 2 230 115 1.05 60 10
016-175-0013 124 47 1/10 12.9 2 220 115 1.05 60 10
016-175-0007 240 25 1/10 6.7 1 200 115 1.05 60 10
175 Series 3-Phase 230/460V
Part Number Speed (RPM)*** Torque (in-lbs) Input HP Gear Ratio Stages OHL* Amps Hz Shipping Wt.
017-175-0096 17 150** 1/12 95.5 3 150 .60/.35 60/50 9
017-175-0050 32 138 1/12 49.0 3 130 .60/.35 60/50 9
017-175-0025 63 74 1/12 25.2 2 230 .60/.35 60/50 9
017-175-0013 122 38 1/12 12.9 2 220 .60/.35 60/50 9
* Maximum overhung load on center of output shaft. ** Output torque is gear limited.
*** All speeds given are at 60 HZ. For dual frequency units, speed will be 5/6 of rated speed.
Gear & Engineering Corp.
100 & 175 Series Parallel Shaft AC
100 & 175 AC
1.42
1/8 SQ. KEY
X 0.75 LONG
0.50 DIA.
0.58
A
0.42
3.60 SQ.
3.56
0.57
3.35
DIA.
ø0.31
WITH .26
FLAT
OPTIONAL MOUNTING BASE
100 PSC 115V
HP Stages A
1/20 1, 2, 3 6.44
1/80 4, 5 6.26
175 3-Phase
3.34
8.64
0.46
FLAT
1.501.88
3.04
#10-32 TAP (4) PLACES
2.65 SQ. MOUNT
175 PSC 115V and 115/230V
HP Stages A
1/10 1, 2, 3 7.40
1/20 3 6.78
1/20 4,5 7.48
1/8 SQ. KEY
X 0.75 LONG
#10-32 TAP (4) PLACES
ON A 2.65 SQ. MOUNT
3.94 SQ.
3.75
0.75
2.75
ø0.28
(4) HOLES
AC PARALLEL
SHAFT
GEARMOTORS
4.10
OPTIONAL MOUNTING BRACKET
1.88
0.42
1.50
0.50
DIA.
2.75
1.42
0.46
FLAT
3.74
0.57
0.75
3.60
SQ.
3.75
Gear & Engineering Corp.
35
Loading...