Biro FBC-4800 Specifications
A 60 lb. meat block can be chipped
in less than 60 seconds.
Save approximately 2-1/2 lbs.
of meat from each chipped
meat block.
Bloom qualities are uniform
and excellent.
No measurable chipper
product loss.
Better utilization of other cutting
machinery for retail processing.
Better utilization of man power
for other productive duties.
Reduce saw blade usage.
Extra handling of meat sticks
is eliminated.
Planned productivity is assured.
Quality control is maintained.
Minimum product shrinkage occurs.
Minimum operational heat is generated.
Better bloom.
Extends case life.
Stands alone for quality
and value since 1921
SPECIFICATIONS
MODEL FBC-4800SS TEMPERED FROZEN BLOCK CHIPPER
CONSTRUCTION STAINLESS STEEL CONSTRUCTION
MOTOR
P KW TYPE VOLTS AMPS CYCLE PHASE STATUS
H
5 3.75 OP 208-230/460 16-15/7.5 60 3 STD
3.75 OP 220/380-415 15/8.7-7.9 50 3 STD
5
5 3.75 OP 575 6 60 3 EC
OP= OPEN STD=STANDARD EC=EXTRA COST
SWITCH
TRANSMISSION OIL BATH WITH HEAVY DUTY BRONZE GEAR FITTED DIRECTLY TO MOTOR.
STANDARD EQUIPMENT POLYETHYLENE PRODUCT RECEPTACLE, PRODUCT RECEPTACLE DOLLY,
OPTIONS (EC) STAINLESS STEEL DISCHARGE CHUTES, LONGER AND WIDER LEGS FOR PRODUCT
OPERATION MAXIMUM BLOCK SIZE 8” (203 MM) X 16-1/2” (419 MM) X 19-1/2” (495 MM).
CLEANING ENTIRE LID OPENS FOR EASY ACCESS, ENTIRE KNIFE SHUTTLE ASSEMBLY REMOVABLE AS A
CERTIFICATIONS N.S.F. -U.L. -C.S.A. -USDA
WEIGHT UNCRATED: 533 LBS. APPROXIMATE
DIMENSIONS CRATED L = 54” (137 CM), W = 45” (114 CM), H = 38” (96.5 CM)
MAGNETIC TYPE WITH LOW VOLTAGE AND OVERLOAD PROTECTION.
FLOOR BOLT DOWN LOCATOR CHOCKS, OPERATING AND SAFETY MANUAL.
DISCHARGE INTO BIRO CONVEYOR. CALL FACTORY
RECOMMENDED BLOCK TEMPERATURE 15° TO 25° F OR 10° TO 4° C. CAN REDUCE BLOCK INTO
CHIPS APPROXIMATE 3-1/2” (89 MM) X 3-1/2” (89 MM) X 1/4” (6.4 MM) IN LESS THAN 60 SECONDS.
UNIT FOR CLEANING.
CRATED: 610 LBS. (277 KG) APPROXIMATE
(LEGS ARE FOLDED UP FOR SHIPPING)
THIS INFORMATION REPRESENTS OUR BEST JUDGEMENT BASED ON WORK
DONE AND TEST PERFORMED. THE BIRO MANUFACTURING COMPANY
TSOEVER IN CONNECTION WITH THE USE OF THE
ASSUMES NO LIABILITY
INFORMATION OR FINDING CONTAINED HEREIN.
WHA
THE BIRO MANUFACTURING COMPANY
1114 WEST MAIN STREET
MARBLEHEAD, OH 43440-2099 U.S.A.
Phone: (419) 798-4451
Fax: (419) 798-9106
http://www.birosaw.com
sales@birosaw.com
ITEM NO.: LIT-FBC-137
FORM NO
Md FBC-4800-137-8-90-07-09-06-2-ENG-MARK
.:
Service is available from over 245 locations worldwide
Loading...