Biro EMG-32 Specifications
Raise your meat grinding operations to new heights of productivity,
efficiency, and profit with the Biro EMG-32 Ergonomic Mixer Grinder.
The top of the hopper is lowered so that the average operator
no longer has to lift a full meat lug above their shoulders
to dump it in the hopper, and the grinding head is
raised to a height where you don't have to bend
over to fill trays prior to packaging. Just as important,
you get all of this without sacrificing the quality of your
grind. The auger is parallel to the floor, so the product
isn't compressed too much from being forced uphill, and
the typical temperature rise of the product is 0 to less
than 4° F (depending on product temperature).
This helps ensure maximum shelf life. The twin mixing
paddles give you a fast, even, thorough blend without
overworking your product; the auger is fed evenly and
smoothly. The EMG-32's compact size means it fits nicely
in today's smaller, more efficient meat rooms, so that you
can continue to maintain a high level of productivity in
minimum space. Of course, all of this comes with the
superior Biro design and reliability you've come to
depend on.
SHOWN WITH STANDARD
PNEUMATIC FOOTSWITCH
T NOT SHOWN
LUG CAR
Stands alone for quality
and value since 1921
SPECIFICATIONS
MODEL EMG-32 ERGONOMIC FEED MIXER GRINDER.
CONSTRUCTION HEAVY DUTY STAINLESS STEEL HOPPER, LID, PADDLE, FRAME AND AUGER.
CAST IRON HOT TIN DIPPED BOWL AND RING, SIZE 32.
MOTORS
MOTOR HP KW VOLTS AMPS CYCLE PH CODE
UGER7.5 5.5 208-220/440 24-22/11 60 3 STD
A
IXER3/4 1.3 208-220/440 5.7-5.2/2.6 60 3 STD
M
AUGER 7.5 5.5 575 9.2 60 3 EC
IXER3/4 1.3 575 2.4 60 3 EC
M
UGER7.5 5.5 220/380-415 22/12.7-12.4 50 3 STD
A
MIXER 3/4 1.3 220/380-415 5.9/3.4-3.1 50 3 STD
STD=STANDARD EC=EXTRA COST NC=NO CHARGE
SWITCH
POWER CORD 11’ 10-4 CORD WITH PLUG 208-220/440-60-3; NO PLUG 220/380-415-50-3
CAPACITY HOPPER: UP TO 150 LBS. (68 KG).
GRINDING CAPACITY UP TO 80 LBS. (36.3 KG) PER MINUTE, FIRST GRIND 1/8” HOLE PLATE.
DRIVE SYSTEM SINGLE REDUCTION ROLLER CHAIN.
SAFETY MAGNETIC SAFETY INTERLOCK ON HOPPER LID.
STANDARD FEATURES NO INLET (SOLID TUB) HOPPER, SPURT GUARD, RING WRENCH, PNEUMATIC FOOTSWITCH, 11’ CORD AND PLUG
OPTIONS (EC) ELECTRIC FOOTSWITCH, SIZE 32 PLATE AND KNIFE, 35° RIGHT AND LEFT SIDE HOPPER INLET WITH CONNECTIONS FOR
OPTIONS (NC) LEXAN LID.
CERTIFICATION U.L., N.S.F., U.L.-C.
WEIGHT UNCRATED: 700 LBS. (317.5 KG) APPROXIMATE.
DIMENSIONS CRA
TED
WATERTIGHT MAGNETIC WITH THERMAL OVERLOAD AND UNDER VOLTAGE PROTECTION,
24 VOLT CONTROL CIRCUIT.
NO PLUG 575-60-3.
UP TO 56 LBS. (25.4 KG) PER MINUTE, SECOND GRIND 1/8” HOLE PLATE.
(U.S.), REVERSIBLE PADDLES, MEAT CART LESS LUGS, LOCKING SWIVEL CASTERS WITH PREVENTZ ADDITIVE,
BOWL NUT WRENCH, OPERATING AND SAFETY MANUAL.
TANDEM OPERATIONS, STAINLESS STEEL BOWL AND RING (ENTERPRISE OR UNGER).
HEIGHT 52” (132 cm)
CRATED: 845 LBS. (383.3 KG) APPROXIMATE.
L = 61”
(155 CM),
W = 37”
(94 CM), H = 62”
(157.5 CM)
AD HEIGHT
LO
(137.2 cm)
54”
OUTPUT HEIGHT 32” (81.3 cm) to 38” (96.5 cm)
LENGTH 52” (132 cm)
WIDTH 29”
(73.7 cm)
LUG HEIGHT 30” (76.2 cm) to 36” (91.4 cm)
THE BIRO MANUFACTURING COMPANY
1114 WEST MAIN STREET
MARBLEHEAD, OH 43440-2099 U.S.A.
Phone: (419) 798-4451
Fax: (419) 798-9106
http://www.birosaw.com
ALL SPECIFICATIONS CONTAINED HEREIN ARE
SUBJECT
O CHANGE
T
WITHOUT NO
TIFICATION.
FORM NO
sales@birosaw.com
Md EMG32-296-10-06-5-ENG-MARK
.:
ITEM NO.: LIT-EMG-32-296
Service is available from over 245 locations worldwide
Loading...