Biro B350A Specifications

The BIRO B350A is designed to provide trouble free service in a WET MEAT ROOM ENVIRONMENT. Features such as Water Resistant Motor, Electrical Components and Connections, plus Non-Corrosive Metals, all add to the water protection benefits of the slicer. With THREE AUTOMATIC SPEEDS, the Operator can select the position best suited for the products being sliced or can be used in the MANUAL POSITION for a minimal number of slices to be cut.

• BLADE - 13-7/8" (350mm) Hollow Ground Alloy Steel has a special (patented) design to relieve surface suction on wet products and will allow a slicing capacity of 9.5" on round products. The THICKNESS CONTROL allows cuts from 0 to 1" (25mm) with indicator positions shown on the Index Knob in one millimeter increments allowing precise slice consistency.

• DESIGN - Minimum number of removable parts allow for EASY CLEAN UP while the ergonomic and EASY-GLIDE CARRIAGE allows no resistance during the need for a manual operation. The Automatic operation provides an auto piece count selection from 0-99 pieces with automatic shut-off.

• BUILT-IN SAFETY FEATURES - Blade Protective ring guard prevents exposing the blades edge when the blade cover is removed for cleaning. Product table lockouts prevent the thickness gauge from being opened during cleaning. Emergency shut-off and thermal overload/no volt release prevents accidental turn on after power outages. Remote sharpener mounts easily when needed but is stored away from the slicer when not in use, providing added hygiene security to the slicing operation.

• BIRO - This trusted name has over 89 years experience in bringing quality products with value to your meat room operation.

Stands alone for quality

and value since 1921

Service is available from over 245 locations worldwide

ALL SPECIFICATIONS CONTAINED HEREIN ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION.

THE BIRO MANUFACTURING COMPANY

1114 WEST MAIN STREET

MARBLEHEAD, OH 43440-2099 U.S.A.

Phone: (419) 798-4451

Fax: (419) 798-9106

http://www.birosaw.com

sales@birosaw.com

ITEM NO.: LIT-B350A-355

FORM NO.: Md B350A-355-3-10-1-ENG-MARK

SPECIFICATIONS

MODEL

B350A GRAVITY FEED AUTOMATIC SLICER

CONSTRUCTION

BODY - ANODIZED POLISHED ALUMINUM CAST WITH NON-CORROSIVE METAL FRAME

MOTORS

IP 65 - 1/2 HP (.35 KW) 115V 60 HZ -1 INTERNALLY COOLED. (STANDARD U.S.A. VOLTAGE) IP 65 - 1/2 HP (.35 KW) 220V 60 HZ -1 INTERNALLY COOLED. IP 65 - 1/2 HP (.35 KW) 220V 50 HZ -1 INTERNALLY COOLED.

STANDARD FEATURES

BLADE - 13 7/8" (350MM) HOLLOW GROUND ALLOY STEEL - 200 RPM OVERSIZED PRODUCT TABLE 13-1/4" (337MM) WIDE BY 12-1/2" (318MM) LONG MAXIMUM PRODUCT CUT - ROUND 9-1/2" (241MM) MAXIMUM PRODUCT CUT - RECTANGULAR 11-3/4' X 6" (298 X 152MM) MAXIMUM PRODUCT CUT - SQUARE 7-1/4" X 7-1/4" (184 X 184MM) AUTOMATIC SPRING LOADED BELT TENSIONING BLADE PROTECTIVE RING GUARD PREVENTS EXPOSED BLADE EDGE DURING CLEANING TILT-AWAY PRODUCT TABLE LOCKOUT PREVENTS THICKNESS GAUGE FROM BEING OPENED DURING CLEANING THERMAL OVERLOAD/NO VOLT RELEASE PREVENTS ACCIDENTAL TURN ON AFTER POWER OUTAGES GREEN PUSHBUTTON ON/OFF CONTROL AND RED E-STOP BUTTON POLYGROOVE BELT DRIVE PROVIDING OPTIMUM PERFORMANCE WATER RESISTANT IP 65 MOTOR, WIRING HARNESS, ELECTRONIC CONTROLS, CONNECTORS PRODUCT FENCE - FOR USE ON NARROW PRODUCTS

AUTOMATIC SPEED #1

SHORT STROKE 48 PER. MIN., MEDIUM STROKE 40 PER. MIN., LONG STROKE 38 PER. MIN.

AUTOMATIC SPEED #2

SHORT STROKE 56 PER. MIN., MEDIUM STROKE 45 PER. MIN., LONG STROKE 45 PER. MIN.

AUTOMATIC SPEED #3

SHORT STROKE 60 PER. MIN., MEDIUM STROKE 50 PER. MIN., LONG STROKE 50 PER. MIN.

CERTIFICATIONS

NSF, ETL, CE

WEIGHT

UNCRATED - 106 LBS. / 48 KG. CRATED - 121 LBS. / 55 KG.

DIMENSIONS

UNCRATED - OVERALL DEPTH 30-1/2" (775MM) OVERALL WIDTH 24" (610MM) OVERALL HEIGHT 35-1/2" (901MM) FOOT TO FOOT DEPTH 23-1/4" (589MM) OUTSIDE WIDTH 17-3/4" (450MM) OUTSIDE CRATED - 28" (711MM) X 32-1/2" (826MM) X 33-1/2" (850MM)

OPTIONS

VEGETABLE CHUTE 8-1/4" (209MM) DIAMETER

BAGEL CHUTE 4-3/4" (120MM) DIAMETER