Biro 722 Specifications
The BIRO 722 / 822SS / 922SS Series of
Manual Feed Grinders is a group of
reliable, durable, and inexpensive service
grinders designed for restaurants, meat
departments, and hunters. All of these
grinders have a 1hp motor, which gives
you all of the power and output you need
in a grinder. All models are equipped with
a single reduction HTD (high torque drive)
belt driven system that provides maximum
power without slippage for maximum
productivity. The bowl assembly and feed
tray on each of the models can be
removed without tools, so they’re easy to
clean, and their simple, rugged
construction gives you a grinder that is
virtually maintenance free for years to
come. With a 22 head size and straight
or flared throat, you can choose the
grinder that’s right for you. Reliability,
durability, and low maintenance - BIRO
Service Grinders.
722
822SS
922SS
Manual Feed
Grinders
THE BIRO MANUFACTURING COMPANY
1114 WEST MAIN STREET
MARBLEHEAD, OH 43440-2099 U.S.A.
Phone: (419) 798-4451
Fax: (419) 798-9106
http://www.birosaw.com
sales@birosaw.com
ITEM NO.: LIT-22-22-22-218
FORM NO.: Md 722/822/922-218-11-08-16-ENG-MARK
Service is available from over 245 locations worldwide
MODELS 722 822SS 922SS
MOTORS: STD. OPT. STD. OPT. OPT. OPT. STD. OPT. OPT. OPT.
HP (KW) 1 (.75 KW) TE 1 (.75 KW) TE 1 (.75 KW) OP 1 (.75 KW) OP 1 (.75 KW) OP 1 (.75 KW) OP 1 (.75 KW) OP 1 (.75 KW) OP 1 (.75 KW) OP 1 (.75 KW) OP
VOLTAGE 115/208-230 110/220 115/230 240 220/380 220/440 115/230 240 220/380 220/440
CYCLE 60 50 60 50 50 60 60 50 50 60
PHASE 1 1 1 1 3 3 1 1 3 3
AMPS 9/5.4-5 9/4.9 13.2/6.6 6.2 3.8/2.2 3.8/1.9 13.2/6.6 6.2 3.8/2.2 3.8/1.9
6’ POWER CORD & PLUG YES NO YES NO NO NO YES / NO NO NO NO
6’ POWER CORD NO PLUG NO YES NO YES YES YES NO / YES YES YES YES
MOTORS:
CALL FACTORY AS ABOVE
CONSTRUCTION: CAST ALUMINUM BASE CASE: MIRROR FINISH STAINLESS STEEL
FEED PAN: REMOVABLE STAINLESS STEEL FEED PANS STANDARD, BOWL GUARD ON 922SS
FEED PAN CAPACITY: HOLDS APPROXIMATELY 20 LBS. HOLDS APPROXIMATELY 25 LBS.
(9.1 KG) (11.3 KG)
BOWL, CAST IRON TINNED, STRAIGHT SIDES, TINNED, STRAIGHT SIDES, TINNED, FLARED SIDES
SIZE 22 KNIVES & PLATES (EC) SIZE 22 KNIVES & PLATES (EC) SIZE 22 KNIVES & PLATES (EC)
BEARINGS ON DRIVE SHAFT: HEAVY DUTY THRUST AND RADIAL - PRELUBRICATED
DRIVE SYSTEM: HTD (HIGH-TORQUE DRIVE) STEEL WIRE POWER GRIP BELT, 95% EFFICIENCY RATED,
NON CORROSIVE, NO LUBRICATION REQUIRED
GRIND CAPACITY OUTPUT: ALL CAPACITIES ARE APPROXIMATE THROUGH 1/8” HOLE PLATE AND DEPEND ON
PRODUCT TYPE, TEMPERATURE, SIZE, PLATE HOLE SIZE, AND FEED RATE.
LBS/KGS PER MINUTE 10-16 LBS. (4.5-7.3 KGS) 10-16 LBS. (4.5-7.3 KGS) 12-20 LBS. (5.5-9 KGS)
STANDARD FEATURES STOMPER, OPERATING AND SAFETY MANUAL, CORD AND/OR PLUG SEE MOTOR SPEC ABOVE
OPERATING SPACE 13” (330MM) X 24” (610MM) APPROX. 18” (455MM) X 28”
REQ’D (710MM)
KNIFE/PLATE REQUIRED, EXTRA COST. VARIOUS PLATE HOLE SIZES AVAILABLE TO FIT YOUR SPECIFIC APPLICATION. CALL AGENCY OR FACTORY.
CERTIFICATIONS UL NSF NSF USDA UL NSF USDA
WEIGHTS: NET 93 LBS. (42.2 KG) 89 LBS. (40.3 KG) 93 LBS. (42.2 KG)
GROSS 133 LBS. (60.4 KG) 121 LBS. (54.8 KG) 148 LBS. (67.1 KG)
DIMENSIONS CRATED: L = 21” x W = 34” x H = 23” L = 16” x W = 28
1
⁄2” x H = 24” L = 18” x W = 31” x H = 27”
533 MM x 864 MM x 584 MM 406 MM x 724 MM x 609 MM 457 MM x 787 MM x 686 MM
ALL SPECIFICATIONS
ARE SUBJECT TO
CHANGE WITHOUT
NOTIFICATION.
MODEL 922SS
MODEL 722
TE=TOTALLY ENCLOSED OP=OPEN EC=EXTRA COST STD=STANDARD OPT=OPTIONAL
1HP, 104/208-60-1
1-1/2HP, 208-230-60-1 922SS ONLY (EC)
1HP, 208-230/460-60-3
1HP, 220/380-50-3
MODEL 822SS
Loading...