Biro 44SS Specifications

Stands alone for quality

and value since 1921

SPECIFICATIONS

MODEL 44SS POWER CUTTER (18”). CONSTRUCTION STAINLESS STEEL HEAD AND BASE.

MOTORS

STANDARD FEATURES

SWITCH WATERTIGHT MAGNETIC WITH THERMAL OVERLOAD AND UNDER

HEAD AND DOOR STAINLESS STEEL, MOVABLE. BASE STRUCTURE STAINLESS STEEL. BLADE STANDARD HARD TOOTH, THREE TEETH PER INCH (8.5 MM BETWEEN TEETH),

BLADE SPEED 4000 FEET (1219 M) PER MINUTE. BLADE GUIDE UPPER AND LOWER BLADE BACKUP GUIDE ASSEMBLIES,

BLADE TENSION RATCHET ARM AND CAM AGAINST POUND TESTED SPRING AND

BLADE WHEELS 18” (45.7 CM) CAST IRON, CHROME NICKEL PLATING, UPPER WHEEL

BEARINGS HEAVY DUTY TAPERED ROLLER BEARINGS USED IN UPPER WHEEL

CATCH PAN POLY, EXTRA DEEP, ROUNDED CORNERS, PAN SEALED OFF FROM

CLEANING UNIT STAINLESS STEEL BODY, LONG LIFE CARBIDE GUIDES, STEEL SAW

DRIVE SYSTEM NON SLIP SILENT V-BELT, TENSION ADJUSTABLE. LEGS ST MEAT CARRIAGE STAINLESS STEEL EIGHT BEARING E-Z FLOW. MEAT GAUGE PLATE STAINLESS STEEL FACED, ADJUSTABLE FROM 1/16” (1.59 MM) TO 6-1/2” (165 MM) LOCKS IN POSITION, CAN BE

TMENT

OR COMP

MO PLATTER ALL STAINLESS STEEL, HELD IN PLACE WITH TWO PUSH PULL HOLD DOWN STAINLESS STEEL RODS.

SAFETY END CUT

PUSHER PLA OPTIONS (EC) POWER CORD AND PLUG, STATIONARY TABLE, LOW

OPTIONS (NC) HIGHER BLADE SPEED CERTIFICATION U.S.D.A., U.L., N.S.F., C.S.A., C.F.I.A. WEIGHT UNCRA

DIMENSIONS CRA

TED

HP TYPE VOLTS AMPS CYCLE PH STATUS

3 DP 208/220/440 10.5-9.6/4.8 50/60 3 STD

5 WP 575 5.9 60 3 EC

5 WP 208/220/440 17-16/8 50/60 3 EC

DP= DRIP PROOF EC=EXTRA COST WP= WATER PROOF NC=NO CHARGE STD-STANDARD

TWO SAW BLADES, OPERATION AND SAFETY MANUAL, SAFETY

ALL POSTER, END CUT SAFETY PUSHER PLATE.

VOLTAGE PROTECTION.

135” (3429 MM) LONG X 5/8” (16 MM) WIDE, .022” (.56 MM) THICK (TWO SUPPLIED WITH EACH SAW).

REMOVABLE, WITH LONG LIFE CARBIDE BACK-UP INSERTS.

TENSION SPRING GAUGE.

ASSEMBLY LIFTS OUT.

AND LOWER BEARING HOUSINGS.

OTHER PARTS OF BASE, ACCESSIBLE THROUGH BASE HINGED DOOR.

CLEANERS, REMOVABLE AS A UNIT FOR EASY CLEANING (ASSEMBLY ALSO ADJUSTABLE AS A UNIT).

AINLESS STEEL LEG BOL

OWN OUT OF GEAR, ENTIRE ASSEMBLY REMOVABLE FOR CLEANING.

THR SEALED OFF FR

ARD

AND

OM MEA

, REMOVABLE.

T LEVELERS

T CONT

CT AREAS

, EASIL

CCESSIBLE THROUGH REMOVABLE PANEL DOOR.

Y A

THE BIRO MANUFACTURING COMPANY

WIDE BLADE SYSTEM, LEFT HAND

OFILE HEAD

PR FEED, DOUBLE MOVING CARRIAGE, ROLLER TOPS, NARROW GUIDES FOR .018/.46 M THICK BLADE ,SPLIT (2 PC) REAR PLATTER, MICRO GAUGE ASSEMBLY, LONGER MEA

CRATED: 700 LBS (317 KG) APPROXIMATE.

(137.2 CM),

L=54”

, 1”

, ST

UGE PLA

T GA

600 LBS. (272 KG) APPROXIMATE.

TED:

W=45”

TES

, 5000 FEET (1524 M), 6000 FEET (1829 M) PER MINUTE.

(114.3 CM), H=38” (96.5 CM).

AINLESS STEEL

MARBLEHEAD, OH 43440-2099 U.S.A.

WHEELS.

1114 WEST MAIN STREET

Phone: (419) 798-4451

Fax: (419) 798-9106

http://www.birosaw.com

sales@birosaw.com

ITEM NO.: LIT 44-058

FORM NO.: Md 44SRS-058-7-06-30-ENG-MARK

Service is available from over 245 locations worldwide