Birlea tetras Assembly Instructions Manual

Vendor: S000053

Page 1 of 5

ASSEMBLY INSTRUCTIONS

TETRAS 4’ BED

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR TETRAS 4’ BED
FRAME.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

HEALTH & SAFETY:

DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.

WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all legs to stop
the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame collapses.

CARE & MAINTENANCE:

Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.

www.birlea.com

Vendor: S000053

Page 2 of 5

Parts List Hardware List (found in box 1)
Part Description Box Qty Part Description Qty
1 Headpost (L/R) 2 2 A

M6 x 20 mm JCBC Screw

16

2 Footpost (L/R) 2 2 B

M6 x 50 mm JCBC Screw

4

3 Headend 1 1 C

M6 x 35 mm JCBC Screw

6

4 Footend 1 1 D

M6 Nut

10

5 Side Support 3 2 E

Double Slat Cap

11

6 Side Frame 3 2 F

Single Slat Cap

22

7 Mid Support 3 1 G

M8 x 50 mm JCBC Screw

2

8 Base Leg 1 3 H

M8 Nut

2

9 Slat 4 22 **M4 & M5 Allen Key Supplied.

Vendor: S000053

Page 3 of 5

Step 1: Fix the headposts (1) to the headend (3) then attach the footposts (2) to the footend (4) using
hardware part A.

DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Step 2: Fix the side support (5) to the headposts (1) and footposts (2) using hardware part A.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Step 3: Place the side frame (6) at the bottom of the side support (5) using hardware parts B and D
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000053

Page 4 of 5

Step 4: Place the mid support (7) on top of both side frames (6) and secure using hardware parts G and H
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Step 5: Fit the base legs (8) to the mid support (7) according to the holes at the side and tightly secure using

hardware parts C and D.

DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Step 6: Adjust both of the side supports (5) into inner direction until the screws reach the end of the hole as

shown. Tighten the screws for the side supports and the mid support.

DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000053

Page 5 of 5

Step 7: Press hardware part E into the mid support (7) then place hardware part F onto an end of every slat
(9).

DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Step 8: Place the slats (9) into hardware part E then press hardware part F firmly into the side supports (5).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Additional Information:

• For complete product information, images and dimension diagrams please visit the
website www.birlea.com

• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.

• Why don’t you send us photos of your assembled furniture to [e-mail] to be
shared in our #birleahome feature on Instagram.