Page 1
Vendor: S000139
Page 1 of 7
ASSEMBLY INSTRUCTIONS
CRUZ 3 DOOR WARDROBE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR CRUZ 3 DOOR WARDROBE
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright
Assemble on a soft, clean surface to prevent damages
To remove the printed numbers on the pieces, use a moistened cloth
HEALTH & SAFETY:
DO NOT use this wardrobe if any parts are missing, damaged or worn
DO NOT use this wardrobe unless all fixings are secured
Always use on a level, even surface
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure
DO NOT push the wardrobe as this will damage the base
Always lift the wardrobe with two people to reposition
Keep any sharp objects away from the wardrobe
www.birlea.com
Page 2
Vendor: S000139
Page 2 of 7
Parts List Hardware List
Part Description Qty Part Description Qty
1 Top Panel 1 A
8 x 30 mm Wooden Dowel
20
2 Shelf Panel 1 B
Simple Minifix Screw
20
3 Base Panel 1 C
Cam Lock
20
4 Left Panel 1 D
Plastic Cap
16
5 Right Panel 1 E
3 x 14 mm Screw
4
6 Door 3 F
3.5 x 14 mm Screw
48
7 Shelf Panel 1 G
3.5 x 25 mm Screw
6
8 Frame 4 H
5 x 30 mm Screw
20
9 Back Panel 3 I
8 x 20 mm Wooden Dowel
8
10 Divider Panel 1 J
10 x 10 mm Tack
75
11 Handle 3 K
Metal Claw
8
12 Large Hanging Rail 1 L
Rail Support
4
13 Small Hanging Rail 1 M
Hinge
8
14 Spine 1 N
Hinge Bracket
8
** You will need a small mallet and a
screwdriver for assembly
O
Glue
1
P
Small Plastic Foot
4
Q
Curved Hinge
4
R
Hinge Bracket
4
S
5 x 40 mm Screw
2
T
Plastic Foot
2
Page 3
Vendor: S000139
Page 3 of 7
Step 1: Prepare these parts for assembly
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Page 4
Vendor: S000139
Page 4 of 7
Step 2: Attach the frames (8) to the left panel (4) and right panel (5) using hardware part H, a screwdriver (not
provided) and the glue provided. Attach the shelf panel (7) to the right panel (5) using hardware part C and a
screwdriver (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Step 3: Attach the side panels to the base panels (2) and top panel (1) using hardware parts C and D with a
screwdriver (not provided) then insert the hanging rail (9)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Page 5
Vendor: S000139
Page 5 of 7
Step 4: Attach the shelf panel (2), top panel (1) and left panel (4) using hardware parts C and D with a
screwdriver (not provided) then position the large hanging rail (12) and small hanging rail (13)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Page 6
Vendor: S000139
Page 6 of 7
Step 5: Join together two of the back panels (9) with the spine (14) then position and secure the back panels
using hardware parts J and K with a small mallet (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Page 7
Vendor: S000139
Page 7 of 7
Step 6: Attach the doors (6) then attach the handles (11) using hardware parts H, M and Q with a screwdriver
(not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
For complete product information, images and dimension
diagrams please visit www.birlea.com
Loading...