Bird Technologies 91-00-114 User Manual

Bird®Technologies Group, consisting of Bird®Electronic Corporation and TXRX Systems®, is a global, innovative supplier of RF products, systems, services and educational solutions.

Bird®Technologies Group reserved the right to modify specifications or discontinue any product without notice.

www.bird-technologies.com 440.248.1200/866.695.4569 [e-mail]

Antenna Clamps

• Pipe-to-pipe clamps allow the parallel connection of two similar or dissimilar sized pipes.

• Typically used to attach stand-off mounts or pipes to tower legs.

• Utilize 3/16" thick clamp halves.

• Manufactured from hot dipped galvanized steel.

• Either 2 clamps per set or 3 per set depending on the length of the antenna

680 AntennaClamp-DS09072006

91-00-104 (2 per set)

or 91-00-114 (3 per set)

Antenna Mounting Clamps Selection Guide

Models Description Fits Antennas

91-00-101
91-00-111

Joins two 1.9" OD to 4.25" OD round members.

For straight or tapered legs.

Model numbers that start with "101" and "CC"
Use 91-00-111 for antennas longer than 15 ft.

91-00-104
91-00-114

Joins two 1.5" OD to 3.5" OD round members.

For straight or tapered legs.

Model numbers that start with "BA", "EA", "OA", and "COL"

Use 91-00-114 for antennas longer than 15 ft.

91-00-101 (2 per set)

or 91-00-111 (3 per set)