Bird B Gone 2000 User Manual

Installation and Applications

INC.

Features

Bird-B-Gone Spike 2000 is constructed of durable polycarbonate
plastic with U.V. Inhibitors. It is the most cost effective, permanent
protection against bird landings. It is non-conductive and provides the
widest coverage of any bird deterrent: 7”. Bird-B-Gone Spike 2000 is
easy to install on ledges, beams, parapets, sills, pipes, roof peaks,
chimneys, post piling, signs and any where birds are landing and
being a nuisance.

Spike 2000 will repel all species of birds.

Colors: Spike 2000 is available in White, Tan, Grey, Black, Brown,

Brick Red and Crystal Clear. Custom colors also available.

Packaging: Spike 2000 is packaged with twenty-five 2 ft. sections
per box. One box contains 50ft. of protection.

TM

Applications

Bird-B-Gone Spike 2000 is a versatile system that can be easily installed where any bird can roost.

Ledges:

Most often, Pest birds congregate on ledges
and roof tops. Install Spike 2000 to keep
birds from creating unsightly messes.

Conduit:

Spike 2000 can be attached to wires,

conduit, gutters, and pipes by using
common hose clamps, Nylon ties or
wire lashings.

Large Flat Surfaces:

Spike 2000 assemblies
can be installed in multiple
rows for wide area coverage.

Nesting Areas:

Many times pigeons nest in a specific area
for generations. Preventing nesting takes a
special installation using intertwining vertical
and horizontal rows.

Curved Surfaces:

Spike 2000 is flexible and can be
installed on curved surfaces (such
as lampposts or signs) by using
common hose clamps, nylon ties
or wire lashings.

IMPORTANT ! Observe all Cautions and Warnings listed in instructions prior to installation.

See reverse side.

Patent # 5,253,444 • Patent # 5,433,029 • Patent Pending

INS T AL LA T ION INS T R U C T IO NS F OR

B IR D• B • G ONE "S P IK E 2 0 0 0 " S Y S T E M

C AUT ION!

READ AND FOLLOW ALL INSTRUCTIONS PRIOR TO ATTEMPTING TO

INST ALL BIRD-B-GONE SPIKE 2000. SPIKES ARE SHARP ...
BE SURE TO WEAR GLOVES AND SAFETY EYE WEAR.

KEEP OUT OF REACH OF CHILDREN AND PETS.
DO NOT INSTALL WHERE HUMAN PHYSICAL CONTACT IS POSSIBLE.

Thoroughly c lean all surfaces where the product is to be

1.

installed. S uggestion: Us e a 10% bleach or ammonia s olution

to dis infect that ar

including overhanging branches , leaves , nests , etc . befor
dis infec ting.

DUE TO THE INFECTIOUS DISEASES ASSOCIATED WITH
BIRD FECES, BE SURE TO USE EXTREME CARE WHEN
REMOVING NESTS AND BIRD DROPPINGS.

ea. It is important that all debris is r

emoved

e

5.

that have been in an area for generations may take some extra

effort. S pike 2000 s hould be ins talled horizontally on the s urfac e

and vertica lly across the back wall. Intertwine spikes as s hown.
(Illus #4)

2. Determine method of attaching S pike 2000 to s urfac e.

• For Wood: Us e #8 Wood s crews . Y

wood s crews for every 2ft. section of s pikes .

• For Concrete, Brick, Steel: U s e Outdoor C ons truction

Adhes ive that is not s ilicon bas ed. C all

rec ommend ed a dhes ives . One c aulk ing tube of a dhes ive

should c over a t least 30 ft. of S pike.

ou will need 10 - #8

B ir

d- B-G one for

3. When using adhesives:

trough on the under s ide of the s pike strip.
Als o put a dollop of adhesive on eac h of the s crew
holes . this will a llow the glue to mus hroom up through
holes and adhere more effectively ( Illus # 1)

over hang strip 1/2” from edge of s urfac e.. .
And be s ur

e that no more than1/2” is left to ba ck of wa ll.

.

( Illus. # 2 )
c . When placing the next s trip of s pikes , be s ur

“ E nd A “ to “ E nd B ”
E nd-A S tarts with vertical center s pike.
E nd-B S tarts with two middle s pikes offs et at an angle.

( Illus # 3 )

( Illus # 1)

e to plac e

For heavy infestation/nes ting areas : G etting rid of pes t birds

GLUE TROUGH FOR

1.

EASY AND NEAT GLUING

OFFSET PRE DRILLED
HOLES FOR SCREW
ATTACHMENT

NOTCHES FOR EASY
CUTTING TO ROW SIZE

“

7

“

1

/

2

7

LEDGE

2.

Over hang spikes1/2”

No more than 1/2” to
back wall

3. Apply End-A to

End-B Only

“

1

/

2

End-A

Vertical

“

“

1

1

Center

Spike

B

A

End-B

2 Angled

Middle Spikes

“

Note: Whenever possible - Screw or bolt down the spikes in
conjunction with using an Outdoor Construction Adhesive.

4. Adapting to size:

S pike 2000’ s unique design has brea k away points
between eac h s et of s c r
twist the produc t at thes e points to break off sec tion as

needed. Tin s nips, Hac ksaw, etc . c an be us ed to c ut the
product to any des ired s ize. ( Illus # 1)

Any Questions Regarding

ew holes. Y

S P IK E 2 0 00

ou can bend and

Installation

call 1-800-392-6915

Fax: [phone] Web site www.birdbgone.com
Tel: [phone] E-Mail: [e-mail]

20” Ledge/Area

4. For Wide areas and Heavy infestations - Intertwine

spikes with 1” overlap on both vertical and horizontal
surfaces.

23918 Skyline • Mission Viejo, CA 92692

“

INC.