
PARTS IDENTIFICATION
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly
3. Please follow attached instructions in the same sequences as numbered to assure fast & easy assembly.
WARNING !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately
2. This product is for home use only and not intended for commercial establishment.
HARDWARE IDENTIFICATION
PAGE 2 OF 5
A.
1 PC
ASSEMBLY TIME 15 MINUTES
B1 (BOX 1) B2 (BOX 2)
HEADBOARD
A.
300501KE (B1)
FROM BOX 1
HEADBOARD
1 PC
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS.
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
B.
E.
1 PC
C.
FOOTBOARD
BED RAIL
BED SLAT
BED SLAT SUPPORT
WITH LEVELER
2 PCS
4 PCS
8 PCS
D.
1.
5.
LONG BOLT
ALLEN WRENCH
4 PCS
1 PC
3.
4.
LOCK WASHER 8 PCS
FLAT WASHER 8 PCS
6.
SCREW
8 PCS
2.
SHORT BOLT
4 PCS
Z - B2 (BOX 2) - Hardware pack is located in B2

BOLT
ALLEN WRENCH
6 PCS
1 PC
PARTS IDENTIFICATION
LOCK WASHER 6 PCS
FLAT WASHER 12 PCS
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly
3. Please follow attached instructions in the same sequences as numbered to assure fast & easy assembly.
WARNING !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately
2. This product is for home use only and not intended for commercial establishment.
HARDWARE IDENTIFICATION
PAGE 4 OF 5
ASSEMBLE HEADBOARD TO METAL FRAME
A.
1 PC
B1 (BOX 1)
HEADBOARD
HEX NUT 6 PCS
WRENCH 1 PC
7.
10.
8.
9.
11.
12.
Z - B1 (BOX 1) - Hardware pack is located in B1

PAGE 5 OF 5
ASSEMBLE HEADBOARD TO METAL FRAME
A
METAL FRAME
9
12
9
7
10
11
8