You have received a device with the additional Home Monitoring function by
BIOTRONIK.
How Home Monitoring works
Your device (1) is equipped with a special transmitter. It sends information on your
heart to the transmitter, your CardioMessenger (2), usually at night.
The transmission power from your device is low and does not impair your health in
any way. Its limited transmission range, however, requires the use of the CardioMessenger.
The CardioMessenger collects the information and transmits it to the BIOTRONIK
Service Center (4) as encoded messages via a mobile connection (3).
Here, the messages are decoded and can be viewed by your physician (5) on a
protected web site.
Based on the information received, your physician can decide if your device is optimally programmed or if the therapy needs adjustments. In this way, Home Monitoring serves as a practical diagnostic aid for your physician.
5First Steps
2First Steps
First Steps2399229_ATechnical ManualCardioMessenger® Smart
Check the completeness of the delivery
Your CardioMessenger is supplied ready for use, and you can operate it immediately
by inserting the power plug into the wall outlet.
However, prior to usage, check the CardioMessenger for any visible damage and
use only an undamaged CardioMessenger.
Return a damaged CardioMessenger to your physician.
Use only the provided original power supply brick (see the technical data).
Other equipment may impair proper functioning of the CardioMessenger and
increase the emitted interference or decrease the CardioMessenger's resistance to
interference.
The delivery includes the following:
The CardioMessenger Smart
The power supply brick with power cord and power plug
Technical manual with quick reference guide
6First Steps
Where Do I Put the CardioMessenger?
Your CardioMessenger has a battery so you can take it along as needed during the
day.
However, it should be placed close to your bed at night for the nightly data transfer
from the device to the CardioMessenger.
The bedside table is therefore the best location for your CardioMessenger, as it
usually meets the following conditions:
• The CardioMessenger is placed on a solid base and cannot fall.
• The distance to the device is less than 2 m (6 feet), so that regular data transmission from the device to the CardioMessenger at night is assured.
• On the bedside table, the icons on the CardioMessenger's display can be read
well so you can verify on a daily basis that it is ready for service.
However, if the bedside table is made of metal, you should not place the
CardioMessenger directly on the table. For example, place a stack of books to
establish a distance of approx. 5 cm between the two so that the metal does not
interfere with the device's data reception.
Please take the following also into consideration:
• Do not place the CardioMessenger next to a television set, microwave oven, or a
similar source of electromagnetic interference.
You may hear noises typical of cellular phones if you place the CardioMessenger
too close to a radio alarm or a television set, for example.
• Do not expose the CardioMessenger to temperatures exceeding 40°C (104°F).
Do not put it in places where it is subjected to direct sunlight and do not put it
directly under a halogen spotlight.
• Do not expose the CardioMessenger to temperatures below 0 C (32 F).
• Protect the CardioMessenger against water and high humidity.
Do not place it in the bathroom.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.