How it Works
Biontech
Loading...
BTM-303D
Operation Manual
32 pgs8.36 Mb0

Biontech BTM-303D Operation Manual

Download
OPERATION MANUAL
Model : BTM-303D
* There is a protection lm on the control panel of this product. * Please read each section thoroughly for proper unit usage. * Keep the manual in a safe place and refer to it whenever needed. * The manufacture and distribution company will not be held responsible for any malfunction or accidents resulting from incorrect installation or improper handling.
BIONTECH Co., Ltd.
Table of contents
Please have the Ionizer installed according to the directions in this manual. It is advisable that a competent plumber perform the installation.
Installation and operation should be carried out in conformance with building and construction codes, running water regulations and city ordinances.
During the nal inspection, be sure to check for leakage, ow rate and full operation of all functions.
After completing the installation, read the manual and take a pH measurement with supplied pH test
reagent drop (See Page 19).
Depending on local water quality, pH of the water may vary, particularly in areas where well water is supplied as tap water.
Table of contents
1. Parts ............................................................................................................................................................
2. Name and description of each part ........................................................................................................
3. Safety preparations ...................................................................................................................................
4. Installing Your Ionizer ...............................................................................................................................
•Precautions for Installation
•lnstallation Directions.
5. Prior to Use ............................................................................................................................................
•Precautions for using the product
•Using the product appropriately for each purpose
•Directions for Storage and Maintenance After Use
6. Producing Ionized Water ........................................................................................................................
•Selecting Alkaline Ionized Water
•Selecting Acidic Ionized Water
•Selecting Puried Water
•Self Cleaning
•pH(Ion Concentration) Measurement
...........................................................................................................................................
7. Filter Replacement ....................................................................................................................................
•Filter Replacement Period
•Filter Replacement Procedure
8. Using the Cleaning Filter ....................................................................................................................
9. Using Ionized Water..................................................................................................................................
10. Support ....................................................................................................................................................
•Questions and Answers (Q&A)
•About after service (A/S)
11. Product Specications ............................................................................................................................
..........................................................................................................................
.................................................................................................................................
.............................................................................................................
.....................................................................................
...................................................................................
..............................................................................................................
.................................................................................................................
..........................................................................................................................
......................................................................................................
.....................................................................................................................
................................................................................................................
.................................................................................................................
...........................................................................................................................
3 4 6 8 8 9 13 14 15 16 17
17 17 18 18 19 19
19 20 21
22 24
24 26
30
2
Parts
● The following components need to be checked before installation.
● The illustration shows basic components, their shapes may appear different from the actual components
Diverter Valve(Optional)
Adaptor(Small)
X1 X1
X2
Flexible Alkaline Faucet
Wall-mountion Nails and Fuse
2 Nails 2 Wall Plug
2 Screws
Hose
X1
Ø 7x9 PVC hose: 1m 1/4” standard hose: 2m (PE Reinforced hose)
Acidic
Water
Outlet
Installation Drawing
For Mounted Wall For Water Outlet
1 Fuse
X1
X1
X1
X1
X1
Hose Band Sagety Clip
X1
pH Test Solution
X1
Water outlet
pH Comparison Sheet
X2
Water Supply Valve Cover
x1
Owner’s Manual
X1
OPERATION MANUAL
Model : BTM-303D
* There is a protection lm on the control panel of this product. * Please read each section thoroughly for proper unit usage. * Keep the manual in a safe place and refer to it whenever needed. * The manufacture and distribution company will not be held responsible for any
(Optional Item)
malfunction or accidents resulting from incorrect installation or improper handling.
BIONTECH Co., Ltd.
● The supplied standard parts should be used, Installing parts that are not covered
in the warranty may be physically harmful and/or cause property damage.
3
Name and description
of each part
Front View
Bottom View
Number
.
1
2
3
4
5
6
7
8
9
10
11
12
Water Supply Control Valve
13
14
Safety pin
Tap Water
Hose
Name
Back Panel
Control Panel
Ionized Water Outlet
Fornt Panel
Filter Cover
Bottom Panel
Acidic Water Outlet
Water Inlet
Wall-mounting Groove
Fuse Holder
Audio Speaker
Audio Volume Control
Electric Cord
Rear View
For One-Touch Fitting(1/4” X M10)
Hose
Safety pin
Safety pin
Cover for circuit board and internal ionizer parts.
Function controls and display.
Outlet for either alkaline or acidic water (user-selected.)
Circuit apparatus and devices.
Filter protection cover.
Transformer,electric cord,and devices for xing parts.
Outow of acidic water(control of acidic water quantity).
Tap water supply.
For wall mounting using nails.
Fuse.
Voice and Melody.
Loudness control.
Ionizer operation and water ow adjustment(On/Off).
Electric cord for connecting with the electric wall socket.
Acidic Water Outlet
Function
4
Control Panel
Acidic Water Indication Lamp
- Lights up when Acidic water is selected.
Alkaline Water
Indication Lamp
- Lights up when alkaline water is selected.
Filter Life Indication
Error Indication
- Electrolyzer overheat
- Failure of cleaning
- Overow indication
[Alkaline Water]
Selection Buttons
-Selecting Alkaline Water (Alkaline 1,2,3,4)
Filtered Water Indication Lamp
- Lights up when ltered water is selected.
Cleaning Indication Lamp
- Lights up while cleaning and cuts off automatically when nished.
Drain
Indication Lamp
- Lights up after cleaning when water is draining.
Indication light for
ow volume.
High indication light. Indicating when the ow volume is higher than the appropriate level
Standard indication light Indicating when the ow volume is normal, and the indication level is varies depending on the ow volume
Low Indication Lamp Indicating when the ow volume is lower than the appropriate level
Phone No.
to order lters
- service center information
[Puried Water]
Selection Button
- Selecting Puried Water only.
[Acidic Water]
Selection Buttons
-Selecting Acidic water: [ Acidic ]
IMPORTANT: When seeing 3.5 on the display and the melody is playing please do Not drink the water until the melody stops playing or you select a different setting.
5
Safety Preparations
Description of the symbol marks
The following describes the precautionary items that can prevent the potential damage to the body or the property. The cases of misapplication and resultant risks are divided into Warning and Caution items. You are required to read thoroughly and comply with the descriptions considering they are related to your safety.
Caution
-
Warning
Caution
You should read the documents marked with the following symbols.
-
- Prohibition
Marks
●Indicates that deadly effect can be caused to the body if you use the product wrongly because of your disregard for the items.
●Indicates that injury to the body or damage to the property can be caused. if you use the product wrongly because of your disregard for the items.
Classication
General items to
be prohibited
Fire sources to be
prohibited
Showering to be
prohibited
Disassembly to
be prohibited
●Indicates the general items to be prohibited.
●Indicates the possibility of the product or components catching res due to external sources of re.
●Indicates the possibility of the product causing electric shocks due to electric leakage if it is submerged.
●Indicates the possibility of the product causing electric shocks if it is disassembled
Description
- Instruction
Marks
Classication
General
Disconnecting the plug
from the wall socket.
Description
●Items related to the general behaviors of users.
●The plug needs to be disconnected from the wall socket if there is a possibility of malfunctioning or lightening.
6
WEEE Directive
Warning - Should be followed for your safety.
-
● Do not apply any different power voltage other than the indicated power voltage. If not followed, res or electric shocks can be caused.
● Do not use any other fuse with different capacity.
● Stop using the product immediately when any malfunctioning is found.
● Do not handle the electric plug or operate the power button with wet hands. If not followed, electrical shocks can be caused.
● Should hold the electric plug when inserting it into the wall socket or removing it from the socket.
● Damage to the electric cord, res or electrical shocks can be caused when if the cord is pulled.
● Clean the wall socket after removing the electric plug.
-When there are lots of dusts settled on it, re can be caused.
● Do not connect multiple cords to one single wall socket. When a wall socket is shared, abnormal heat can be generated, possibly causing a re.
●
Electrical shocks, short-circuiting, ignition of res can be caused if a damaged electric cord or plug is used.
● Do not damage, process or forcibly wind or pull the electric cord.
-The cord can be damaged, possible leading to res or electric shocks.
● Do not x the electric cord by using a stapler.
-The cord can be damaged, possible leading to res or electric shocks.
● Electric shocks can be caused if the product is dropped into water by mistake. The following measures need to be taken.
Remove the electric plug from the wall socket. Recover the product from the water. Contact the sales shop or the main ofce for advice.
● Should not arbitrarily modify, disassemble or repair the product. If not followed, res and electric shocks can be caused. The company will not be held responsible for any accidents generated from such activities.
7
Installing Your lonizer
Caution - Malfunction or accidents can be occured
● Do not place any other objects on the product.
● Do not install the product in the areas described as the following.
■ Installation Precautions
Reguiring you to check the rated voltage before connecting the electric cord.
Do not install the product in a place where the sunlight comes in directly or the temperature goes below zero.
■If not followed, the case can be transformed or broken due to freezing.
Precautions for connecting the acidic water hose.
■Install the acidic water hose lower than the main case.
■If the hose is longer than necessary or higher than the main case, the ion generation can be affected, possibly leading to a change in the taste of water.
Should connect the product to the cool water pipe (If connected to the warm water pipe, the purication lter and the electrolytic bath can be damaged)
No warm water
■If not followed, the life span of the lter will be shortened.
Should hold the bottom plate of the main case
■It will be safe to move the product by holding the product at the bottom plate.
Caution
●If the product is dropped, electric shocks can be caused due to the internal malfunction following the impact from the dropping. The product needs to be taken to the sales shop or the main ofce in order for you to request an inspection.
●The purication lter can be broken due to freezing if the product is used in a place where it is freezing cold, requiring the product, if not used, to be stored in a place where the breaking due to freezing can be prevented, but after the purication lter is removed rst.
Avoid any place where heat of re can be directly contacted
■If not followed, the case can be transformed, possibly leading to water leakage
Do not use the product in a place full of moisture or dusts
■If not followed, damage to the product or risk to your safety can be caused.
8
Do not modify the product arbitrarily.
■If not followed, damage to the product or risk to your safety can be caused.
Caution
● Check whether the components to be installed at the water tap are appropriate.
● Should use the standard hose (1/4”), supplied by the company for the connection. Use the one- touch adapter to fasten the hose before xing the safety pin as illustrated in Page 3.
- If the standard hose is not used, damage due to water pressure can be caused, possibly leading to water leakage
● Do not connect the product to a warm water pipe.
- Degradation of purication capacity and malfunctioning can be caused.
■ How to install
1. Wall mounted water tap
Balance maintenance
water pressure control screw
reducer tting
water pressure control screw
safety pins
safety pins
1. Disconnect the water tap from the water pipe.
2. Rotating the angle stop adaptor into the water pipe. (Single-water tap)
3. Assemble the water tap back into the adaptor. (Single-water tap)
4. Install the standard compliant adaptor between the water pipe and the water branch pipe. Then install the which needs to be connected to the water ionizer to the cold water pipe, while connecting the balancing adaptor to the warm water pipe. (Water taps for cold and warm water)
5. Place the rubber gaskets between the water pipes, water tap, and adaptor, and should apply the Teon tape to the connection parts to assemble them.
Hot water side
Cold water side
6. Insert the inlet hose into the one-touch tting installed to the adaptor and then fasten the safety pin.
7. Adjust the water pressure control screw of the adaptor to a appropriate level (Alkaline water ow standard: 1.5 ± 0.5 ℓ/min)
Should use the standard inlet hose (1/4”) and x the valve cover in the direction of the hose to
prevent the hose from being bent or the fastening nut from being loosened.
9
2. Deck type sink mounted water tap
[Drawing 1]
Hole cutter
Electric drill
Size: Diameter1/4”
■ The following tools ate necessary for installation work
Pipe wrench
or spanner
General screwdriver
Teon tape
[Drawing 2]
Place of hole drilled
Cold water
[Drawing 3]
Water pressure control
screw (Spindle)
Running water line
connection Adaptor(small)
1. Prepare the tools for installation as drawing : Electric drill, Hole cutter, Pipe wrench or spanner, General screwdriver, Teon tape 1pc (Drawing 1.)
2. Turn off the water valves before installation under the sinkdeck.
Hot water
[Drawing 4]
Steel Hose
6. installed with one touch tting of union. (Drawing 3~4) Insert the inlet hose into the one touch tting and insert the safety pin as in drawing. ( Pls check if the hose has been securely tted to the end of one thouch tting. if not, it causes water leakage for water pressure )
Water valve of Cold water
Ring nut
Water pipe
Connect the standard connection hose (1/4”) to the adapter
Groover
[Optional]
Acidic Water Outlet
3. Disconnet the water tap from the cold water pipe.
4. Drill a hole for the 1/4” hose appropriate place somewhere in sinkdeck and make the connection to the inlet of the product
5. Find the cold water pipe inside the sink deck and connect the adapter to the cold water pipe (Drawing 2.)
7.
After the connection, adjust the
screw
of the adaptor
(Alkaline water ow standard : 1.5±0.5ℓ/min )
8. Check any possible water leakage at the connection parts after the installation
■Should use the standard inlet hose (1/4”) and x the valve cover in the direction of the hose to prevent the hose from being bent or fastening nut from being loosened.
to an appropriate level.
water pressure control
10
3. Diverter Valve
How to assemble the valve to the faucet
Assembly method of valve for Deck-sink water taps
* Water ows into ionizer when the lever is turned to side
Cold water inlet Nut
Screw
▲
The Adapter
▲Tighten the screws with screw driver, after inserting
Cold water inlet Nut Cold water inlet Nut
the rubber seal
* Water ows down ward when the lever is turned to down
4. Hose Connected Method
After nishing of connection, cover the water supply valve cover part with screws again.
▲Take the little screen out
▲Tighten the screws with screw driver, after inserting the rubber seal
Screw
▲
The Adapter
▲Tighten the screws with screw driver, after inserting the rubber seal
valve cover
Hose
Tap water
Diverter
valve
Nut
Hose
Safety pin
11
Caution
● Do not install the product in the following areas:
- If not followed, malfunctioning can be caused.
•If vibration and impact can be fel
•If direct sunlight comes in •If bathroom is installed or winds and rains can affect
•If there are lots of moisture or dust •If there is a risk of breaking due to freezing
•lf heat of re can be felt
● You are required to contact the sales shop or the specialized installer for queries when you attach the product to the wall.
● Improper mounting may result in the product falling of, accident or mal-function.
5. Steps for assembling the component before installing them
● First of all, assembling the flexible pipe to the half-moon shaped alkaline water outlet at the upper part by turning it clockwise.
1. Measure the distance between the place for installation and the adapter installed to the water tap and then cut the hose with an extra length.
2.Cut the PVC hose for the acidic water into the length of 50~70cm and place it lower than the product.
Should use the standard inlet hose (1/4”) and x the valve cover in the direction of the hose to prevent the hose from being bent or the fastening nut from being loosened. The safety pin needs to be inserted before using the water.
●The product can be used conveniently by placing it on any place by applying the wall mounting or stand type (Turn table) depending on the place of installation.
●After installation, connect the product to the power line.
●When the water ows through the product, the power will be turned on automatically. Then, select Puried Water menu to enable the water branch pipe to open and close repeatedly to allow the water to ow for 2~3 minutes freely. Then push the pH button to set the desired concentration and compare it with pH comparison sheet. The black water that will come out is the lter dusts owing with water, not dangerous to the body. (Refer to How to measure the pH value in Page 18)
6. How to install in different places
A) When installing the product onto the wall
● Apply water to the installation drawing and place it onto the wall while keeping the horizontality
● Of those nailing positions at the width (1~3) or the height (2 ~4), choose the convenient ones for driving 2 nails
● Place the hanging holes of the product onto the nails :Positions of nails B) When placing the product on the sink deck and its supports.
-Place the main case of the product on an appropriate position.
● When the above steps are nished, use the hose to connect the valve cock of the adapter to the inlet pipe at the bottom of the main case of the water ionizer
7. Audio volume control
1. Using Flat-head driver, adjust the loundness.
2. Screwing yellow nail to left, volume will be up. Screwing it to opposite, Volume will be down.
•If horizontality can not be acquired
•lf damage can be caused to the product
12
8. In case of power failures or suspension of water supply
■ In case of power failures.
• Turn off the water branch pipe in case of power failures. (When letting water ow through, puried water will come out)
• Use the product normally when the power is recovered.
■ In case of suspension of water supply.
• Do not use the product.
• Stop the water from owing through when the water supply is suspended in the middle of using the product When the water supplied is resumed, let the water ow sufciently for direct water supply or showering in
order to help the inside air and other materials come out. Without going through such steps, the water still can be used normally, but with the risk of drastic decrease of the life span of the lter when allowing air or other materials ow through the main body.
Prior to Use
Precautions for use
1.
the appliance is not to be used by children or persons with reduced with reduced physical, sensory or mental
capabilities,or lack of experience and knowledge, unless they have been given superviision or instruction
2. children being supervised not to play with the appliance
Important safeguards
When using electrical products, especially when children are present, basic safety precautions should always be followed, including the followung:
READ ALL INSTRUCTIONS BEFORE USING
Danger - To reduce the risk of electrocutions
1. Always unplug this product immendiately after using.
2. Do not use while bathing.
3. Do not place or store product where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for a product that has fallen into water. Unplug immediately.
Warning - To reduce the risk of burns, electrocution, re, or injury to persons
1. A product should never be left unattended when plugged in.
2. Close supervision is necessary when this product is used by, on, or near children or invalids.
3. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair
5. Keep the cord away from heated surfaces.
6. Never block the air openings of the product or place ot on a soft surface, such as a bed or couch, where the air openings may be blocked. keep the air openings free of lint, hair, and the like.
13
7. Never use while sleeping or drowsy
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Caution
Do not use the following water, as problems may arise:
- Turbid and contaminated water
- Water with high concentration of red rust
Do not use any substance other than the designated glycerate calcium (electrolysis-stimulating) calcium) or calcium sulte (chlorine-neutralized) in the calcium container unless obtained from ionizers. Turn off the water supply valve when replenishing the calcium otherwise, water leakage may result. Check for secure connetion of the calcium container cap, to avoid water leakage.
●Use tap water only.
- This machine is manufactured for drinking water based on standard tap water.
●Do not use the following water, as problems may arise:
•Turbid and contaminated water •Water with high hardness
•Very salty water •Water with high concentration of red rust
Precautions for using the product
•Do not hold up the main case while holding the outlet exible pipe. (Cause for breakage)
•Do not operate the strong alkaline ionized water (level 5) continuously for a long period of time. If you use the product in such manner, the system protective circuit (Temperature sensor) may be started, depending on the quality of water, and the electrolysis can be suspended.
When using the product in a place where the water hardness is high.
•Before using the water initially daily, push the acidic water button to allow the acidic water to ow through for about 1 minute.
•In case of tap water, in places where the water is used a lot. You need to push the acidic water button one time daily to allow the water to ow through for the manual rinsing. (By selecting the acidic water button).
In places where the water hardness is high or compounds of calcium are abundant, there can be white sedimentation inside the case, requiring additional purifying system to be used depending the level of the sedimentation.
Caution
●Do not ll the calcium container with no other substances than the designated.
- Glycerin acid calcium (Electrolysis facilitating calcium) or calcium sulte (Removal of chloride.)
●Should turn off the water pipe when ling the calcium.
- If not followed, water leakage can be caused.
●Check where the calcium container cap is surely fastened.
- If not fastened surely, water leaksge can be caused when the water ows through.
14
Use the product appropriately for each purpose
pH level selection Indicated
•When infusing vegetables to remove their bitter taste
Alkaline 4
Alkaline 3
Alkaline 2
Alkaline 1
Puried
Acidic
•When washing vegetables
•Use it for drinking after consulting the doctor
•Recommendable for medical and culinary usage
•Recommendable for drinking and cooking
•Recommendable for daily drinking
•Recommendable for initial drinking or dissolving powdered milk
•For washing dishes
•Strong acidic sanitary or rinsing water can come out when the water volume is adjusted
•Rinsing with Acidic water to eliminating Viruses Bacilli
pH value instructed
10.0 ±0.5
9.5 ±1.0
9.0±1.0
8.5±1.0
3.5+1.0
Alkalinity
Acidity
The pH value instructed is acquired by taking into consideration the source water based on Seoul, Korea
(Concentration of pH 7.0 ± 0.5, the water ow standard of 1.5ℓ/m (±0.5ℓ).
The pH values of the alkaline and acidic ionized water may not fall into the range of the pH value
instructed of the table above depending on the water quality and water ow volume.
Caution - Usage of the product
▲
High
| |
| |
Low
| |
| |
High
▼
● Do not use ammable materials like benzene or sprays for the product.
- Malfunctioning can be caused.
● Sufcient attention needs to be paid when a child of young age uses the product.
● Run tap water for 10 to 15 seconds prior to initial ionizer use each day.
● If ionizer is not used for several days, run water for at least 30 seconds prior to use.
● Contact the sales shop or the main ofce for advice when the generated water smells.
● Do not drop the product or apply strong impact to it.
- Dropping or impact can cause malfunctioning.
● Do not block the water outlet. If blocked, water leakage or malfunctioning can be caused.
● Should place the outlet hose (Acidic water outlet) below the main case.
● Do not use the water which is above 30°C (86°F) If not followed, malfunctioning can be caused.
15
Directions for Storage and Maintenance After Use
1. How to store and manage the product after using it.
Turn off the power before moving the product Do not let water come inside the main body. Do not block the outlet nozzle or the drainage hose arbitrarily. Do not bend or twist the hose arbitrarily. Turn off the source water supply valve when the system will not be used for a long period of time. Disconnect the electric cord from the wall socket when the system will not be used for a long period of time. Clean the surface of the main body with soft cloth soaked with soap water.
2. Precautions for using it. (1) Precautions to be taken when using the ionizer.
●Pay attention to the following items when drinking the alkaline ionized water generated through the electrolysis.
Consult a doctor before drinking the strong alkaline water of level 5. Those people with achlorhydria need to take the advice from a doctor for drinking the treated water Do not use any type of water that can not meet the water quality requirements for the drinking water The product is designed exclusively for the water of normal temperature, so warm water should not be used. Do not drink the alkaline ionized water together with medicine. Those people who just started using the water need to begin with small amount of nearly pH neutral water. They need
to consult a doctor for drinking the strong alkaline water. Stop drinking the water and consult a doctor if you feel abnormality after drinking the water, or if there is no alleviation of symptoms felt in the stomach even after continuously drinking the water.
Those people who currently go through medical treatment need to consult a doctor before drinking the water. Those people with problems with the kidney, such as renal failure, calcium excretion failure, should not drink the water. Those people who drink the alkaline ionized water need to check, once a month since after the initial drinking, whether the
pH value is still within the range for drinking, through utilizing a glass electrode type pH device or colorimetry before they continue to drink the water.
Drink after the initial alkaline water ows through. Avoid any metal container if possible and drink the water within a day while keeping it cold.
(2) Pay attention to the following items regarding the use environment and conditions.
Should keep the water ow volume at an appropriate level in order to prevent the alkaline ionized water from being generated with difference in the pH value compared with the set pH value due to the difference in the water ow volume. Do not use the product in a place, like a bathroom, where temperature or humidity is high.
Use the product in a place where there is no slope.
Cap
Non-woven fabric
UF Membrane Filter
General activated carbon
Water Outlet
Non-woven fabric
General activated carbon
Classication
UF Membrane Filter
Place of origin
Korea
Remarks
Calcium sulte
Special Fiber Pad
16
Producing lonized Water
Selecting Alkaline lonized Water
Operation indication panel Alkaline Level Buttons
■ Indication light for water inow. When the tap water ows in, the water inow indication light indicates 'L' when the water pressure is low and 'H' when it is high.You are required to adjust and keep the water pressure to make the indication light stay at the center of "NORMAL".
When the indication light stays at the standard level, about 1.5l + 0.5l /min.
of water will ow through.
1. Open the water supply control valve to let the water ow in.
2. Use the pH button to select a stage.
- The value of selected pH stage is indicated.
- In case of"alkaline", any value between stage 1~4 will be indicated.
- When normally started, the system provides the alkaine ionized water with previously set alkaline value.
3.The product is ready to used. Voice guidance:"Alkaline lonized Water on Process."
■ When the water supply control valve is turned off after selecting and using "Strong""alkaline",the setting will return to the previously set value of "Alkaline".
■ Do not use the product in the "Strong alkaline" state for a long period of time. The power can be turned off due to the operation of the system protective circuit depending on the quality of water.
_
Indication of operation
in progress
Selecting Acidic Ionized Water
Alkaline Level Buttons
When the acidity pH selection button for the operation is pushed, the acidic ionized water will ow through the alkaline ionized water outlet.
1. Open the water supply control valve to let the water ow in.
2. Use the acidity pH selection button for selecting (Melody comes out while the product is being used)
Voice guidance: "Acidic lonized Water on process."
Indication of operation
in progress
3. When the water supply control valve is turned off in the middle of the water being used, the setting will return to the previously set value of 'Alkaline'. In order to stop the operation in the middle of the use, other selection buttons need to be pushed to select other functions.
17
Caution
● Acidic ionized water is not for drinking, so do not drink it.
● Use the water after letting the water ow through for about 5 seconds right after the generation is initiated.
● Use the water initially daily after letting the water ow through for 10 ~ 15 seconds by opening the water tap completely
● Use the water after letting the water ow through for more than 30 seconds when using the product after not using it for a few days.
● Should not remove the purication lter when letting the water ow through the main case.
● Do not drink the acidic water.
Selecting Puried Water
Puried water indicating button
Indication of operation in progress
Self Cleaning
Automatic Self-Cleaning inside the main body will be performed in the following cases in order for the cleaning of the electrolysis bath and sustaining of water generation function.
When the water ow volume of the alkaline or acidic ionized water reaches about 10ℓ.
■Do not let the water ow through while the rinsing is progressed . (Err 7 will be indicated if the water is allowed to ow through)
■ When the rinsing is in progress, the indication light will be blinking and the melody will be heard.
The rinsing process will be repeated until the Self-Cleaning is completed if the water is allowed to ow through while the rinsing is progressed.
■ Even when there is more than 10ℓ of water owing through, the automatic rinsing will not be performed if an operation is in progress. The automatic rinsing will be performed when the water stops owing through.
Please take note
- There can be ‘water dripping’ from the outlet pipe in the middle of the rinsing process, which is not an abnormal situation.
- The operation will stop automatically when the indication light for the rinsing is turned off after the rinsing is nished.
Voice guidance:“ Self Cleaning.”
1. Open the water supply control valve to let the water ow in to generate the alkaline ionized water of the set value.
2. Push the puried water indicating button.
- Indication light for puried water selection Voice guidanc "Crystal clear water on precess"
3. Use the puried water.
4.When the water supply control valve is turned off in the middle of the water being used, the selection of the puried water is called off and the setting will return to the previously set value of Alkaline . In order to stop the operation in the middle of the use, other selection buttons need to be pushed to select other functions.
■ When the indication light for the puried water is turned off. When there is a change in the water pressure leading to the lowering of the water level, the indication light will be turned off and the setting will be returns to the previously set value of ‘Alkaline’. Use the product by setting the value again after adjusting the water pressure.
Rinsing will be performed for about 30 seconds after the water supply control valve is turned off.
When the water supply control valve is opened after the rinsing, about 0.2ℓ of water will be drained.
Indication of operation
in progress
18
Indication light for water draining
When the water supply is opened after the rinsing is nished, the indication light for water draining will blink automatically together with a voice guidance. After about 0.2ℓ of water is drained the indication light will be turned off, and the setting will return to the previously set value of ‘Alkaline’ for the operation. (Do not drink the drained water )
Voice guidance :“ Drain out, wait for a moment please.”And when the draining is nished, there will be a voice guidance will say“ Alkaline Ionized Water on process.”
Indication of operation in progress
pH (ion concentration) Measurement
The pH values (Ion concentration) of the generated alkaline or acidic ionized water can be measured.
■ Check the generated water after adjusting the water pressure to meet the standard water ow volume (1.5l + 0.5l /Min.) according to the ionized water generation method.
(The pH values can vary depending on the quality of water and the ow volume)
■ Materials to be prepared: The pH Reagent - parts
■ How to measure
1. Let the generated water (Alkaline or Acidic ionized water) ow through for about 10 seconds.
2. After lling a transparent glass with 1/3 of the water, put 2~3 drops of the pH reagent into the water and shake it.
3. Compare it with the pH colorimetry. Please take note
■ The color of the test solution will change as time goes by. (Compare the color of the test solution with the pH colorimetry before too much time passes by after dropping the test solution into the water)
■ When disposing of the undiluted test solution, you need mix it with water to make it light before letting it ow out.
■ When the pH concentration is measured, the color of the test solution can come out differently compared with the pH colorimetry due to the effect of various substances dissolved in the water such as carbonic acid gas.
■ The pH color of the alkaline or acidic ionized varies depending on the pH level.
Caution
● Do not let the pH regent contact the eyes and do not drink it.
- In case of drinking it by mistake, you need to drink lots of water. In case of the test solution contacting the eyes, you need to clean your eyes with sufcient water and then consult a doctor.
● Do not place it near any heat of re. If not followed, re can be caused.
● Do not store the regent in a place where it can be reached easily be children. Avoid any place where the temperature or moisture level is high
The pH test solution is an expendable item. It can be purchased at the sales shop or the main ofce.
Filter Replacement
Filter Replacement Period
■ When the water tastes changes or the water ow volume decreases dramatically, you need to check whether the life span is overdue.
■ When the lter usage status indicating number becomes "999" , it will blink. It is recommended to replace the lter even before the end of life span is
reached, if the water smells or the water ow volume decreases, considering the life span can be different depending on the quality of water in individual areas Service Call : 82-1644-3853
Caution
■ In the following cases, the replacement period can be shortened drastically:
● When there is rusty water due to aged pipes
● Lots of impurities in the water for a short period of time
● If the product is used in a place where the water pressure is low.
19
Indication for lter replacement
How to replace the lter
■ Do not disconnect the electric plug. (When the plug is disconnected, the system can be restored when the lter connector is inserted)
(Picutre 1)
(Picutre 4)
1.Open the cover and remove the lter. (Picutre1~3)
■ Be careful of the possible water coming out of the lter. (It is not leakage)
2.Replace with a new lter. (Picture 4)
■ Remove the sealing sticker of the lter.
■ Check whether the O-ring is attached well at the bottom of the new lter rst. Then, place the lter into the hole securely and turn it clockwise to insert it into the connection part. If a unbranded lter is installed, there will be a voice guidance saying “Filter rejected, mount correct one.”, and the power will be turned off after 20 seconds.
3.Let the water ow through after selecting the puried water function.
■ Let the water ow through for about 2~3 minutes. (Dusts of activated carbon which is the ltering medium may ow with water during the initial ow after the lter is replaced.)
■ Check whether there is any water leakage at the installation section of the lter.
4.Insert the lter connector into the corresponding port (Picture 5)
■ Check whether the lter usage status indicating number becomes [000].
5.Close the cover. (Picture 6) Please take note
■When you get the alkaline ionized water in a cup after the lter is replaced, there can be white bubbles. which are not abnormal.
■The ion concentration (pH value) can become slightly higher after the lter is replaced (For about 1 week). That is not abnormal.
Follow the steps mentioned above even when replacing the lter earlier than the time for the replacement.
The lter without our company logo is not a genuine product. When a genuine lter is not used, the quality cannot
be guaranteed and the normal after sales service(A/S) will not be available.
(Picutre 2)
(Picutre 5)
(Picutre 3)
(Picutre 6)
20
Using the Cleaning Filters
Cleaning Filter (Optional purchase)
Calcium scale in electrodes may cause…. The reason for the calcium scale on the alkaline side of the water ionizer is because the high pH of the water causes the minerals in the water to precipitate out of the water and become displaced. Calcium scale on the electrodes causes the pH data of Ionized water decrease because the source water is not coming in contact with the electrodes. once your water ionizer is cleaned using this metod, the pH of the ionized water will be resume higher because the water is now coming in direct contact with the cleaned electrodes
Symptom of calcium scale when whitish oating substances are found in the alkalized water when the water output declines signicantly when the pH of alkalized water drops signicantly
Use of Cleaning Filter Cleaning lter will eliminate most Calcium scale on the plates and inside the chamber of your ionizer allowing for longer life and better performance. Cleaning lter provides the way to keep your water ionizer. insures that the platinum/titanium plates remain clean and free of calcium.
How to use cleansing lter (Optional purchase)
21
Using lonized Water
1. How to use Alkaline Ionized Water
For the initial 7 days
When using it daily
Alkaline ionized
water
Children
level 1 level 1 level 1~2 level 2~3
Adults Remarks Children Adults Remarks
2~3 cups a
day
Caution - Should follow the items for your safety.
■ Do not use the following type of water
● Acidic water.
● Water drained after self cleaning.
● Water tested with the pH reagent.
● Water collected at the start of production. (About 1 ~ 2 cups of water)
■ Be careful about the following items when drinking the alkaline ionized water.
● Do not drink the alkaline ionized water together with medicine.
● Those people with achlorhydria should not drink the water
● Do not use the water for raising shes such as goldsh or tropical sh
● Do not use any aluminum made container vulnerable to the alkaline ionized water. Do not use any copper made container vulnerable to the acidic ionized water.
● Do not store the alkaline ionized water for a long period of time.
● Those people who just started using the water need to begin with small amount of nearly pH neutral water, and then adjust the pH level gradually for drinking the water. (Level 1 of the alkaline ionized water is for the initial stage drinking)
2. How to use Alkaline Ionized Water for the general purposes
■It will be good for your health if you drink it on an empty stomach in the morning or before going to bed.
■Set the alkaline water at the level 1~2 and try to drink 1~2 cups of water daily for a week (7 days). If you do not have any problems after the trials, it will be good for your health to set the level of ionized water at the level suitable for you body.
3. How to use Alkaline Ionized Water for the special purposes
■When cooking rice Try to cook rice after soaking the rice in the alkaline water for 30 ~ 60 minutes in advance. When cooking rice with the alkaline water, the rice will be glossy like glutinous rice, tasty, stored well and kept fresh for a long period of time.
■Coffee, black tea and others Help remove the bitter taste of coffee and the puckery taste of black tea as well as enriching the faint taste and fragrance peculiar to black tea.
■Heavy drinking and hangover It will be good for your health if you drink it before going to bed or drink it on the empty stomach in the morning.
22
■Various dishes
When cooking bamboo shoots, tree shoots, taro and seaweed with the alkaline water, the biting taste and the souring taste will be gone while the natural taste will enriched. When using it as the water for cooking sh, the shy smell will be eliminated, making the sh taste better.
■Liquors, cocktails
The liquors will be made highly mild and soft. When making an ice cocktail using the alkaline water, the taste will be better.
■Plants
If seeds are soaked in the alkaline water before being sowed, the germination rate will be enhanced. Even in case of stem cutting or grafting, plants will take root better. When the water is applied for ornamental plants, the growth of roots will be facilitated. The alkaline water will neutralize the acid soil and effectively facilitate the growth of plants.
■Vegetables, fruits
If vegetables or fruits which are to be stored are washed using the alkaline water, they can be kept fresh for a longer period of time.
■Vegetables with unpleasant odors
When cooked after being soaked in the alkaline water for about 20~30 minutes, oder will be reduced, making vegetables more soft and tastier
■Powdered milk for infants
When mixed with the alkaline water, the powdered milk will be healthier food for infants to eat.
4. How to use the Acidic Ionized Water for special purposes
■Bathing, washing of the face, washing of feet
When used for bathing, the acidic water can be a beauty solution good for your skin. The acidic water is astringent helpful in making the skin soft and elastic (Skin is mildly acidic). When the acidic water is used as rinse for the hair just shampooed, it will neutralize the alkalinity of the soap, helpful in keeping the hair glossy. When the acidic water is used as sanitary or astringent solution for the skin just shaved, it can replace the skin toner or skin lotion.
■Floral arrangement
When the acidic water diluted 1:2 is applied to the cut part of the owers, it will keep the owers fresh for a longer period of time.
■Water for parboiling noodles
When the acidic ionized water is used for parboiling noodles, it will keep them glutinous, chewy and tastier (Thicker noodles for spaghetti, for example, may not be well parboiled with the acidic ionized water, then the alkaline ionized water can be used).
■Washing or processing of fruits and vegetables which contains anthocyanin
When peaches, grapes, strawberries, red cabbages, beans and Asparagus are washed and processed with the acidic water, their natural colors can be kept without a change.
■When preparing fried dishes
When the acidic ionized water is used for preparing fried dishes, the foods will be crispy and tastier.
■When boiling eggs
When the acidic ionized water is used for boiling eggs, the eggs will peel off easily and taste better a lot.
■When cleaning
When the acidic ionized water is used for cleaning corridors, and tiled oors, the dusts of every nook and corner can be easily removed. The acidic ionized water is also fast in drying, so it is not sticky.
■When cleaning glass
When glass, mirrors and glasses are washed with the acidic ionized water, dusts or lth can be easily eliminated and the gloss will be made better. Try to clean household items such as washbowls and chairs and they will be made surprisingly clean.
■When deposits are formed at a kettle or a pot is incrusted due to burning
When deposits are formed at the kettles, or pots are incrusted due to burning, try to place them in the acidic ionized water for overnight, and then they will be made clean.
23
■As the bathing water or for the cleaning of the bathtub
When the acidic water is mixed and boiled together with the bathing water, the combined water can be easily boiling due to the high thermal conductivity of the acidic water. The bathtub can be kept clean because the slime in the water does not build up easily.
■When cleaning t he chopping board
When you use the chopping board continuously for a long time, it will be full of knife scars. Then lthy impurities can be stuck in those knife scars. Use the acidic ionized water to clean and sanitize the chopping board completely.
■When cleaning the tableware
Considering that the acidic ionized water has the cleaning as well as sterilizing power, it can be used for cleaning the tableware.
■When washing the oors
The oorcloth, which is constantly kept wet, is the hotbed for molds. When the acidic ionized water is used for washing the oorcloth, lthy odor can be removed and also the sterilizing effect can be enjoyed. The same goes for the dishcloth.
Caution - Should follow the items for your safety.
■Do not spray water onto the product for cleaning.
●If not followed, electric shocks can be caused.
■Do not use benzene, thinner or insecticidal sprays for cleaning the product.
●If not followed, the outer shape and main body can be transformed or cracks can be caused.
●Contact the sales shop or the main ofce for advice when you try to use the product which has not been used for a long period of time
Using lonized Water
Q (Questions)
Can we use the underground water ? ● Yes, the ground water can be used
For the use of the system
How to handle the product when we will not use for a long period time (More than 10 days) ?
What temperature the owing water is allowed to keep ?
● But, the designated pH concentration level may not achieve depending on areas and quality of water.
Before installing the system, you need to check whether the requirements for the drinking water can be met. [Contact the sales shop or the main ofce for more detailed information]
● The lter needs to be disconnected from the main
body, packed into a vinylpackage and stored in a refrigerator.
● Disconnect the electric plug.
●
When you start to use the system newly after the period
you need to replace the lter. Then you need to use water after letting the water ow through for about 3 minutes.
● Only the water temperatures that is below
30 C can be used within the water unit.
A (Answers)
24
Q (Questions) A (Answers)
The red lamp is turned on at‘Strong Alkaline level 5”. Is it OK when we use the water for soaking out the puckery or bitter tastes of vegetables or washing them?
When we get the alkaline ionized water in a cup, there are white bubbles. What are those bubbles?
About the alkaline ionized water
When we get the alkaline ionized water in a container, there are white substances forming, or depositing on the bottom. What are those?
● There should be no problems with using the water for soaking out the puckery or bitter tastes of vegetables
or washing them.
● Do not use the water for daily drinking.
● The bubbles are generated because,
while ions are generated, the molecules of alkaline ionized water are so tiny and the dissolved hydrogen is sufciently available.
● The bubbles can be generated highly right after t
he installation, or the replacement of the lter. There should be no problems using the product.
●The white substances are generated because
the alkaline ionized water contains lots of mineral calcium. Especially when the carboxyl group(CO ) is abundant, it isbonded with calcium,
3
leading to the precipitation of calcium carbonate (CaCO ). It shows that the
3
electrolysis is surely working.
Even though there should be no problems with drinking the water, you need to clean the container.
Fill the water container with the diluted household vinegar and leave it for one hour. Then shake the container for cleaning.
How about cooking rice using the alkaline ionized water ?
● Rice can be sticky depending on the volume
of water, kinds of rice and kinds of rice cooking appliance.
● Use the water after setting the appropriate level
of ionized water.
Which water would you recommend for the infants?
● It is recommended that the infants are fed
low alkaline ionized water. (Alkaline Ionized Water level 1.)
25
Q (Questions) A (Answers)
What is the pH of the acidic water coming out
About the alkaline ionized water
of the acidic water outlet in the middle of the alkaline ionized water being used
What kind of impact can the acidic water might have on the skin?
About After Sales Service
■You need to check the following items before requesting the repair work if you think the system is malfunctioning :
■You should not try to disassemble and repair the system. Contact the sales shop or the main ofce when the system is malfunctioning.
When there are abnormalities with the system because of your mishandling of the system, the electric plug needs
to be disconnected. Afterwards, restart the system. The system will be restored to normal operation.
■When the following lamps are indicated.
Symptoms Causes and actions
Selection level
Strong alkaline
pH10.0±0.5
Drinking, culinary
pH9.5±1.0
Alkaline
Drinking, Cook
pH9.0±1.0
Initial drinking
pH8.0±1.0
The pH value can be varied depending on the
quality of water and the water ow volume.
●The human skin is mildly alkaline to pH 5.5. The alkaline water not only help keep the acidity of the skin at an appropriate level, but also can help the contraction of skin pores to help keep the skin constantly elastic and moisturized.
Acidic water
pH value`
pH4.0±0.5
pH4.0±1.0
pH5.0±1.0
pH6.0±1.0
Purpose
Eliminate the
shy smell after
cooking ish
Clean the tableware
The power can not be turned on, or is turned off in the middle of the use.
The power is turned off inadvertently in the middle of the use (Periodically On/Off repeatedly)
Once after [Strong alkaline], [Acidic] and [Purified water] is used, the indication will change into [Alkaline
●Is the water ow volume insufcient?
(At least 0.5ℓ/Min. is required) => Open the water branch pipe and adjust the water flow volume.
●Is the electric cord appropriately inserted?
=> Insert the cord into the wall socket correctly.
●Is the fuse cut off? Check the fuse.
●After inserting the electric cord into the wall socket, you need
to check whether a‘beeping’ sound is generated when pushing the button lightly. => The beeping sound means that there are no problems with the fuse.
●It is because of the bimetallic safety system for the
overheating inside the system in case of long hours of operation. When the temperature goes down after the water supply control value is turned off, you can turn on the valve for the use.
●When the water supply control valve is turned off once after [Strong alkaline], [Acidic] and [Puried water] is used, the setting will be restored to the previously set value of [Alkaline] automatically. => Not malfunctioning.
26
Symptoms Causes and actions
1) ERROR MODE: Error indication by ERR 3 (For overheating of electrolysis cell)
2) ERROR MODE: Error indication by ERR 7 (For Self-Cleaning failure)
3) ERROR MODE: Error indication by ERR OF (For excessive water ow volume)
4) ERROR MODE: Error indication by ERR 8 (For a fake lter)
[000] is not displayed after lter replacement.
1) Indication for a fake lter
- Need to replace with a genuine lter designated by the company
2) Indication for the Self-Cleaning failure when letting water ow through in the middle of Cleaning.
3) Indication for water ow volume exceeding 3.3 /Min.
4) Indication for a fake lter
- Need to replace with a genuine lter designated
●Did you insert the lter connector into the corresponding port? => Insenrt the connector correctly.
●Check whether the lter is a genuine one made by the company. =>If a unbranded lter is installed, there will be a voice guidance saying “Filter rejected, mount correct one” and the power will be turned off after 20 seconds.
●Did you insert the lter connector while ionizer was unplugged. => Insert the power plug and put the lter connector into the port.
The lter use indicator is not visible.
All lamps of the main body are turned on. (Still turned on even after the water ow is stopped)
No melody plays, even during the Acidic function.
Filthy odors, weird tastes and murky substances are not eliminated.
●Is the water ow suspended? => When the water ows through, the indication will be turned on. When it stops, the indication will be turned off.
●Is the electric plug disconnected? => Reconnect the plug.
●The system is malfunctioning. => After disconnecting the electric plug, you need to contact the sales shop for advice. * The power will not be turned on when the water ow can not be detected due to the lower water pressure. (Pressure of the tap water is less than 0.6kgf/cm2 )
●The system is malfunctioning. => After disconnecting the electric plug, you need to contact the sales shop and request repair work.
●Check that the Acidic button has been selected. *Allow water to ow and press the Acidic button.
●The lter performance is degraded. => Replace the lter.
●Is the water pressure low? => Open the water branch pipe for adjusting (Contact the sales shop or the main office when the problem is not solved even after the widest opening of the water branch pipe)
●Is the water ow volume too high? => Adjust by the water supply control valve.
27
Symptoms Causes and actions
The outow water volume is low or there is no outow.
The life span of the lter can be shortened when it is blocked due to the sever pollution of the source water.
The water becomes warm when it ows through the main frame.
The pH of the acidic water is indicated as neutral.
Water leaks from the bottom of the main body.
●Is the life span of the lter overdue? (Need to check the lter usage status number) => Replace the lter.
●Is the lter wrongly xed? => Fix it right.
●Is the water supply suspended? => Wait until the water supply is resumed.
●Is the hose bent or crushed? => Set it right.
●When the water ows through initially, the water can become warm due to the room temperature or the heat inside the main body. => Not malfunctioning. Use the water after let the water ow through.
●For about one week after the new lter is installed, the pH value of the acidic water may not fall into the range of the colorimetry (Due to the effect of the activated carbon) => Not malfunctioning. Check again one week later.
●If the pH value of the acidic water is 6.5, the value may be not compatible with the samples of the pH measurement sheet.
●Is the acidic water drainage hose bent or crushed? (The water may not taste good) => Set it right
Water leaks from the bottom of the main body.
●Is the acidic water drainage hose bent or crushed? (The water may not taste good) => Set it right
28
Symptoms Causes and actions
Water keeps [dripping] from the outlets (Especially the acidic water outlet) even after the water supply control valve is turned off.
When tested with the pH test solution, it is yellow for the acidic water, but in case of the alkaline water, the color becomes neutral momentarily.
Water smells disinfectants * Various causes can lead to the symptom. If the problem is not solved by replacing the lter, the water purication process needs to be selected to check the problem. When there is still nothing found about the problem, the items on the right side need to be checked.
The power is not turned off when the water supply control valve is turned off.
Water leakage at the water purier. (Filter socket)
●The remaining water inside the outset can comes out => Not malfunctioning.
●The rinsing operation is in progress. => Not malfunctioning.
●It is due to the effect of the carbonic acid in the water. (Severe in case of the ground water) => Use the water after adjusting the stage of the alkaline ionized water to level 5. Considering that the alkaline reaction and the acidic reaction occur in an opposite way, so it is understood that the alkaline ionized water is generated also if there is acidic reaction taking place. We can simply say that the symptom is the result of the vaporization of the test solution due to the chemical reaction involving the carbonic acid in the water.
●Check whether the storage container is cleaned. => Wash the storage container cleanly.
●The life span of the lter can be shortened due to pollution depending on the condition of the water supply. => Replace the lter (Refer to Page 18~20).
●The ionized water has less crusts of water, meaning that the water is highly active for reaction. Extremely low volume of impurities, when spread throughout the water, can cause the water to be activated together and, possibly, the water to smell. => Use the water by adjusting the alkaline level by down by 1~2 level.
●Check whether the acidic water hose is higher than the main body. => Install the hose 50~70cm below the level of the main body.
●The system is malfunctioning. => After disconnecting the electric cord, you need to contact the sales shop or the main ofce for requesting the repair work.
●Check whether the lter is appropriately fastened into the lter socket. => After checking the lter packing, you need to fasten it to the lter base appropriately.
29
Product Specications
Water Ionizer
BTM-303D
Class 2, Type B Equipment
220V
125V / 3A
Tap Water
280×360×155 (W×H×D)mm
About 6Kg
70~500kPa
5~30 C (41~86 F)
Built-in Temp. Sensors: 2 Sensors (Automatic Restoration)
Continuous Electrolysis
0.6ℓ/min ~ 3.3ℓ/min MAX Standard 1.5ℓ±0.5ℓ/min
Alkaline: 4 Levels / Acid: 1 Level
Auto Cleaning (Time: Approx. 30sec., Drain: Approx. 0.2ℓ) and Manual Cleaning
Platinum-Titanium Electrodes, 5 / 7Plates
Cartridge Type (1 Stage)
230V 240V 120V 50Hz 60Hz
250V / 3A
3000liters : (Approx. 6 months/based on 20ℓor 5.3 gallons per day)
Lifespan Indication by LCD
Nonwoven fabric, Granular activated carbon, Calcium sulphite, UF membrane lter
Chronic Diarrhea / Intestinal Abnormal Fermentation / Indigestion / Gastric Hyperplasia
KFDA Manufacturing License No. 889
No. 09-387
30
Consimer Damage indemnication Guidelines
Indemnication
Type of consumer damage
Within warranty After warranty
If repair is necessary within a month after purchase due to manufacturing defect.
If a replaced product requires major repair
within a month of replacement.
If defect occurs.
Reparable
Defect or
malfunction in
performance and function
that occurred
during normal
operation
Defect or malfunction as a result of consumer’s negligence or error
Malfunction as a result of an act of God (re, salt
damage, gas, earthquake, wind or ood)
Normal consumption of a consumable Problem due to consumer not using a consumable
or optional item as designated
Any other problem as a result of external causes. Problem that occurred due to product serviced by
an unauthorized person
Not reparable
If repair is impossible due to lack of parts. (The company should carry parts for 5 years.)
If a product handed over for repair was lost by the company.
Damage during transit
Reparable
Not reparable
If the same defect reoccurs after repair (more than four times).
Replacement
Replacement
Free service
Replacement
Replacement Replacement
Replacement
Charged service
Replacement after totaling repair cost
Charged service
Charged
service
Charged
service
Charged
service
Replacement after amount
deduction
Charged
service
Charged
service
Separate criteria
Charged
service
31
The most advanced water purication and ionization system
Selected as KGMP
competent company
Acquired ISO 9001 Certicate Acquired ISO 14000
(international standard for nvironmental management system)
Korean Intellectual
Property ofce
Class Registered
U.S. Food and Drug
Administration
Bion-Tech Co.,Ltd.
315030200 201600825 R00
Manufacturer
Bion-tech Co., Ltd.
298-15 Gongdan-ro(Geumjeong-dong), Gunpo-si, Gyeonggi-do South Korea Tel : 82-31-459-3853 Fax 82-31-429-3859 E-mail : btm@biontech.biz
http://www.bion-tech.com (Korean) http://www.biontech.biz (International)
Distributor
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use