How it Works
Bion-Tech
Loading...
B
Loading...
Loading...
BTM-3000
Operation Manual
20 pgs1.74 Mb0

Bion-Tech BTM-3000 Operation Manual

Download
Page 1
Before using this device, read instruction booklet carefully so that you will enjoy healthy water in the best condition. Please keep this instruction booklet well and if you have any question or you are inconvenient in use, contact us any time.
OPERATION MANUAL
Model : BTM-3000
Bion-Tech Co., Ltd.
Page 2
2
We thank you for purchasing our product.This user manual contains useful and essential information on the product. Please read all the instructions carefully before operating the device.
※
There are two levels of cautions,「 Warning
」
and
「
Caution
」
.
Especially, the items, with
「
Warning
」
mark may cause a serious physical injury or even death. However, those with
「
Caution
」
mark could also cause a serious injury.
Hence, please follow all these instructions for your safety reason.
※
After reading this instruction booklet, keep it where the users always can see.
You should carefully read the wordings with the following symbols.
[ Level of Danger ] If you ignore this symbol and misuse the device, It may cause a serious injury or death.
Warning
Caution
[ Level of Danger ] If you disregard this symbol and misuse the device. It may cause a serious injury or death or damage of property.
Explanations of Each Symbol
Symbol Classication Contents
General
General
General
No Fire
Plug-Out
No Disassemble
Not specied general
cautions or warnings.
Not specied general
prohibition.
Not specied general
prohibition.
Under the specic condition,
there is a possibility that the
device will get a re.
There is a possibility that it may bring an electric shock when opening the device.
When thunderbolt or machine s troubles are expected, plug-out the power cable.
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.  Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Page 3
3
■
Before using
■
How to use Ionized Water
■
How to produce Ionized water
■
How to take care of the device
■
Specication of the product
19
■
Assembly and Installation
●
Warning
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
2
●
Caution
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
2
●
Name of the parts
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
5
●
Four kinds of different water
●●●●●●●●●●●●●●●●●●●●●●●
11
●
How to use the superoxidized water
●●●●●●●●●●●
11
●
How to produce and use alkaline water
●●●●●●●
12
●
How to produce
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
13
●
How to test
●●●●●●●●●●● ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
15
●
Producing and preserving the ionized water
●●●
15
●
Determine of setting time
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
16
●
Precautions of handling separator
●●●●●●●●●●●●●●●●●
16
●
In case of not using the device for a long period
●●
16
●
How to clean the electrods
●●●●●●●●●●●●●●●●●●●●●●●●●
16
●
How to clean electrolytic cell
●●●●●●●●●●●●●●●●●●●●●●●
16
●
In case of getting dirty
●●●
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
17
●
Exchange of fuse
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
17
●
Check list
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
17
●
Troble shooting guide
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
18
●
How to assemble the body
●●●●●●●●●●●●●●●●●●●●●●●●
8
●
Installation of the device
●●●●●●●●●●●●●●●●●●●●●●●●●●●
10
C O N T E N T S
Item
Page 4
4
Before Using
This product is a batch water ionizer which produces not only superoxide acidic water with excellent power of sterilizing becteria and viruse but also alkaline water for drinking.
Warning -
Please keep the following instructions for your safely.
Caution -
Cautions in use
●
Please do not use the device at the wrong voltage. It causes a re or an electric
shock.
●
Do not use the fuse of different capacity.
It may cause a damage of the device or an accident.
●
If you get any trouble with your skin after using acidic or superoxide water, stop
using it.
●
Do not reform, disassemble or repair the device by yourself.
It may cause a re or an electric shock.
●
We do not take any responsibility for the accidents resulted by your mistake.
●
Do not plug-in/out with wet hands and do not operate on/off buttons with wet
hands. You may get an electric shock.
●
Do not shower the machine with water. It may cause an electric shock.
●
Do not drop the machine or give a strong impact on it. It may be broken down.
●
Do not ionize warm water. (above30 ).
It makes the machine out of order or deformed by heat.
●
Do not wash the electrolytic cell, electrodes, membrane(separator)and gasket
with detergent. If ionized water began to smell, the device may not make ionized water properly.
●
Do not ionize the water out of the civil tap water standards. It would be harmful
for the body and the machine.
●
Do not breed shes with the ionized water. They could die by the sudden change
of the environment.
●
Please do not use copper or aluminum containers for preserving alkaline water.
Those containers would be damage.
●
If the outlet gets dirty. clean the power plug out from the outlet. A lot of dusts may
break a re.
●
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoide a hazard.
●
When you plug-in or plug-out, please hold the plug body with hand.
Pulling out the power cable itself may bring a damage of the cable, a re or an
electric shock.
Page 5
5
●
Names of the Parts
●
Cover
Separator
Handle
Cock Lever
Membrane Insert Slit
Connection Plug
Electrode
Electrode
Membrane Gasket
Water Level
Electrolytic cell
Socket
Main Body
Control Panel
Fuse
Power cord
Cup Saucer
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
17
14
15
16
Page 6
6
●
Names of the Parts
Top cover
Connection Plug
Electrode
Membrane Gasket
Membrane
Water Level
Membrane Insert Slit
Handle
Main Body
Cock Lever
Fuse
Power cord
The place where to take the ionized alkaline water or ionized acidic water. (Push the cock lever and ionized water will come out. Hand off the handle of cock lever and ionized water will not come out.) When you want to take ionized waters continuously, push up the cock lever into the lock position, then ionized water will continuously.
Prevents over voltage and over current ow through the Top cover, and protects the circuit.
Electrolytic cell
Socket
Groove where the membrane is xed.
To be used for moving the Electrolytic tub from one place to another.
Where ionized alkaline water and ionized acidic water are generated and kept. (Capacity of a water cistern : Acidic water cistern 2
l
, alkaline water cistern 2 l )
Connected to the Connection Plug at the Top cover and connects the power.
Indicates where the water to be put.
Installed at Membrane. Prevents ionized alkaline water from being mixed with ionized acidic water.
only and ions, created by electricity, can pass through it so that the water can be divided into ionized alkaline water and ionized acidic water.
Connected to Socket, supplies the power to the Electrodes.
Anode Electrode pulls ions for the ionized acidic water.
Cathode Electrode pulls ions for ionized alkaline water.
Electrode
14
15
Page 7
7
Control Panel
Set time Indicate
Time setting up / down
Selection indicate lamp
Electrolytic (ion) selection Button
Power ON/OFF Button
Stop Button
Cup Saucer
The place where to put the cup to get ionized water.
16
17
■
Electrolytic dissociation cell
Page 8
8
Assembly and Installation
Warning -
please follow the instructions below for safety.
●
Do not hurt or fold excessively or pull out or bundle power plug cord.
Don't re-wire, cut or put heavy stuff on the power cable.
If the power cord hurt, it may cause a re or an electric shock.
●
Do not put too many plug in an outlet at once which may cause a re.
●
Do not use a damaged power cord or plug which may cause an electric shock or a re.
●
Be careful when you x the power cord with staple. It may cause an electric shock or a
re by damage of the power cord.
1.Wash the Electrolytic cell, membrane and membrane gasket with warm water before assembling the parts of the body.
● Membrane is made of PE and Electrolytic cell,
of ABS resin.
● Do not electrolyze with boiled water and don't
boil the above parts. It would make the machine deformed.
2. The electrodes consist of coating titanium
● Make sure not to splash water on the
connecting Plug when you wash to electrodes.
● Use warm water for electrodes cleaning..
3. Put the membrane and membrane gasket in the Electrolytic cell.
● Fix the cleaned membrane at the membrane
gasket and put it in the groove of Electrolytic cell.
If it is not completely tted, two sides of water will
be mixed up each other.
New product has membrane already xed up.
● How to assemble the body
Page 9
9
4. Membrane install method.
● How to put the Membrane in
1. Use Authenticity of Biontech membrane.
※
Make sure to check, the separator
Gasket should be around the membrane.
2. Press it equally it to both hands, and please
let a oor adhere.
3.Check whether or not it was adhered certainly
to a oor.
※
Check whether or not it was adhered certainly
to a oor.
※ Sprinkle water to separator Gasket, then it would be easier to put in the water tank,
● How to put the Membrane in
1. Get on top of Membrane with both hands.
2. Pull the membrane to an arrow direction like picture.
3. If a space came into being to a base, made it hold water tank, and push up with another hand.
※
Keep it being dried naturally after washing
Page 10
10
● Installation of the device
Please install this device on the lane place.
● This device has a safety switch so as to
shut off the power automatically when this device inclines to more than 10
Caution
● Do not install this device on the unstable or inclined place.
It may cause a physical injury.
● Do not put anything on the top of the device.
It may create a trouble with the machine or may bring an accident.
● Do not install this device where children reach.
● In case that you drop this device into the water,
(1) Plug it out from the outlet. (2) Separate the Top cover from the machine. (3) Ask your agency or our service team for the safety inspection
※
Do not install the device at the places below.
● High temperature(above 60 C ).
● Under the direct sun light.
● Humid and dirty place.
● Bathroom or watery place.
※
Only use the drinkable water which satisfy WHO standard when ltering water.
Do not ionize waters as below. It causes physical problems or troubles with the device.
● polluted water ●water of high hardness ● salty water
● water with a lot of rusts
O
O
Fuse
SAFTY Switch
Page 11
11
● Four kinds of different water.
● How to use the superoxide water
This new Bion-Tech produces superoxidized water, which kills viruses and bacteria, and strong alkaline water, which has very strong washing power like detergent, just by adding a tiny amount of salt to regular water, and also produces very healthy drinking alkaline water which enhances human immune system. You can enjoy a health life by ionized drinking alkaline water.
You can make each 2
l
of strong alkaline water and acidic water with regular water plus 2.0g amount of salt.
[1] Superoxide water Pour water into two water tanks and then stir one measure spoon of salt into the water. Capacity = about 2
l
pH2.7 Acidic water is produced in the left side tank. It is Not drinkable water but it kills and sterilizes bacteria and viruses.
※
Sterilization Power of Superoxide water
※
Analysis charts : 30 seconds after injecting test organism to each in accordance
with manutacture’s instructions.
The pH of alkaline ionized water and acidic water may not be in the range of the indicated pH levels in the table in accordance with place where customer use..
You can make each 2
l
of regular alkaline water and acidic water with regular water only.
How to use Ionized Water
Additive
Staphy lococcus aureus CFU/ml 1.5X10 0 0 0
0 0 0 0 0 0 0 0 0
0 0 0
0 40 90
1.3X10
1.3X10
1.2X10
1.2X10
1.6X10
3
3
3
3
3
3
CFU/ml CFU/ml CFU/ml
CFU/ml
CFU/ml
SALT
Super oxide Ionized water
Units
Inuent
Superoxide water Hexamedine Sol Ethanol
Item
Regular Ionized water
NON-Additive
Approx. 30min Approx. 20min
Super oxide water Slight Acidic water
Approx. 2.7 Approx. 5.5
Not suitable Not suitable Sterilization & Deodorization
Skin care (Astringent)
Neutralization Solution of oil Deoxidization Cleaning
Drinking, Cooking
Not suitable Suitable
Approx. 11.3 Approx. 9.2
2
l
2
l
2
l
2
l
Restoration Water Slight Alkaline water
Producing time
E.coli
Property
Shigella
Capacity
Salmonella
pH
Streptococcus Pneumophylla
Drinking Usage
Pseudomonas spp.
Page 12
12
[2] Restoration water Capacity : about 2l pH11.3 It is produced in the right side cell. It is used for neutralizing superoxide water and resolving protein.
[1] Alkaline water for drinking produce it without adding salt. Capacity : about 2
l
pH9.2 or so It is produced at right side cell. Suitable pH level for drinking is 9.2 ~ 9.6.
※
Chemical constituent of the dissolved water
Although Water temperature goes up according to producing Superoxide water, it does not matter. But continuously producing superoxide water must have intervals of 30 minutes.
MEMO
● How to produce and use alkaline water
※
Test sample analyzed after operating water-ionizing for 30 minutes on the tap water container
of this device
Calcium mg/L 18 27 9.3
4.0 4.8 2.0
6.9 11 3.5
1.8 3.4 0.83
mg/L mg/L mg/L
Unit
Tap water Alkaline water Acidic water
Item
Magnesium
Sodium
Potassium
Caution
● At the rst stage, start to drink neutral water and then make the pH
level higher as your physical constitution goes with the strong alkaline water.
● 200cc of alkaline water per weight of 10kg a day is recommended.
● 1000cc of alkaline water a day is proper for an adult with 50kg.
● If you make milk for baby, a quarter of equal amount of milk powder
you are generally putting is proper quantity.
● Drink alkaline water within 3 days and keep it in a bottle tightly sealed
at the refrigerator
● Do not drink the following waters.
●
Acidic water(Astringent).
● Water with reagent chemical.
● Water which pH level is over 11.
Page 13
13
How to produce lonized water
[2] Regular acidic water Capacity : about 2l pH5.5 It is produced at left side cell. Do not drink it. Use it for skin care as astringent.
producing super oxide water and alkaline water has difference at producing
● How to produce
Show to make super oxide water How to make alkaline water for drinking
1. Water supply
● same as left
<- Push
2. Cock Lever Location
● same as left
1. Water supply
●
t the membrane in Elsctrolytic
chamber and then pour water by water level mark.
2. Cock Lever Location
●
Please check if the cock lever is
locked or not
●
If locked, release the cock lever.
※ If locked, Do not power on.
Page 14
14
Show to make super oxide water How to make alkaline water for drinking
3. Nothing added
3. Adding salt
●
put each one measure spoon of salt into the both water tanks of the Electrolytic cell and melt it completely. The table salt 99% is available.
4. Putting Top cover
●
x the Top cover at the main body
in order for the Connecting Plug to be matched correctly with the socket.
5. Power supply
●
Plug-in the electric power cord into the outlet. And turn on the Power button. Indicator Lamp will be red-lighted.
6. Selection of ionization time
●
Set the time at 30 minutes.
※
Set the Ion Button light in green.
7. Completion of Ionization
●
When the timer switch arrives at OFF, it sounds for 20 seconds.
6. Selection of ionization time
●
Set the time at 20 minutes.
※
Set the Ion Button light in green.
※
Before using the product, the micro-porous paper of Ion Exchange
Membranes has been dried. In the rst operation, Ions in water may not ow smoothly through the Membranes because of this.
If you want to test product performance, please use Ionized Water created from the secondary use.
※
We recommend that you use after stirring a few times Ionized Water in Water Tank of the Electrolytic Cell with a measurement spoon due to the concentration of Ions may be unequally.
MEMO
Page 15
15
pH level varies from 0 to 14. It indicates concentration of acdic and alkaline water. pH 7 is neutral, below 7 is acidic and above 7 is alkaline.
MEMO
With chemical pH reagent packed together, you can judge if the water is super oxide water or drinking alkaline water
※ .
As added some salts to produce superoxide water, Cl is created. . Superoxide water turns to Red when you test them with the reagent to measure pH concentration, but it showed to Yellow color since contained Chlorine ingredient decolorize the Red color.
Put the plastic container included on the cup saucer and take the ionized water by pushing the cock lever. Locking the cock lever by pushing it down and up, you can get the ionized water continuously. Wash the plastic container with the warm water before using. If you want to preserve the ionized water, do it in a cold and dark place like in a refrigerator. Use it up as soon as possible. Use the Alkaline water at least within 2 or 3 days, Acidic water 3 or 4 weeks. Do not keep drinking alkaline water and super oxide water together.
● How to test
● Producing and Preserving the ionized water
Super oxide water
●
The concentration of produced water is various according to the regional water quality, water temperature, input salt amount, etc.
●
The concentration of prooduced water is various according to the regional water quality and water temperature, etc.
●
Throw away 1/3 of a rst cup from cock
lever. Drop 1/3 cup of reagent and then compare them with a colorimeter.
●
Test them by additional reagent and it turns to be light violet or burgundy. The water is suitable for drink.
Alkaline water for drinking
Caution
● After producing super oxide water, take the water from the tub and wash it
clean to prevent gasket from being oxidized.
Page 16
16
How to take care of the device
● Determine of setting time
● Precautions of handling separator
● In case of not using the device for a long period
● How to clean the electrodes
This device is designed to produce drinking alkaline water and regular acidic water by 20 minute operation, and adding some salt to the water, to produce super oxide water and strong alkaline water by 30 minute operation. However, determine the setting time by testing the pH value with pH reagent because the input water pH value is various according to the region's s tap water quality.
●
The membrane has a lot of invisible holes, which will become narrower and will
get blocked as it is being used.
●
If it bets blocked completely, the water can not be ionized anymore as the
electricity current can not ow through it.
●
The membrane and the gasket are to be exchanged every 800~1200 hours operation.
●
If you do not use the device for a long period of time, dry up the membrane well
keep the unit in a dry place.
●
Especially in summer, if you do not use the device for over three days, it is required
to keep the Electrolytic cell completely dry.
●
When you use it again do it in order as the manual says.
The coating Titanium of acidic tub is sanitary and semi-permanent. The exchange of electrode is not required but wash it with water if necessary. Coating Titanium electrode of alkaline tub is also semi-permanent. But you need to remove white matters, minerals like calcium, stuck on it.
●
Do not leave ionized waters in the Electrolytic cell. It may cause some troubles.
Page 17
17
● How to clean Electrolytic cell
● In case of getting dirty
● Exchange of fuse
●
Minus Electrode or Electrolytic cell of alkaline water where alkaline water preserved will get dirty, then soak minus electrode in the super oxide water with vinegar and remove the minerals. Clean electrolytic cell of alkaline water with the super oxide water with vinegar. Plaease wash it with soft sponge.
●
The Electrolytic cell are symmetrical each other. Sometimes exchange their
locations each other in order to prevent it from getting dirty before using the device.
This product will not get dirty with ease as it is made of ABS resin, but if it looks dirty, clean it with the wet towel. Do not wash with thinner or benzene. It may cause discoloration, deformation or leaking.
It does not work if its fuse is cut off. Turn the Top cover of the fuse, located at the bottom of the device, carefully and exchange it with new one.
Warning -
Please keep this for your safety
Do not use any other fuse of different capacity. It may cause serious problems with it.
Page 18
18
● Trouble shooting guide
Before contacting us, please check the following points rst.
Symptom
Indicator Lamp is not lighted
Ionized water is not produced.
When getting the water, the water of the other side
is owed in.
The power is cut-off while producing the ionized water.
Cause
Plugging off from the outlet
Power failure
Cutting off the fuse
Safety switch
The gasket is damaged.
Power failure.
The device is declined.
The water temperature is over 45 degree Celsius. The power is over-loaded by too much electrolytes in the water.
When it is overoaded Because of too much Electrolytes.
The fuse is cut-off.
Life time of the membrane is over.
A lot of calcium is stuck to the electrode.
The membrane is not fitted in completely.
Setting time is short by Quality of water.
The separator is not
completely tted in.
The gasket is not fitted in completely.
Plug-in to the outlet.the outlet
Conrm if the other electric devices work.
Exchange the fuse with new one.
Check the safety switch if it works well.
Exchange the gasket with new one.
Check if the other electric devices work.
Locate it on the plain place.
Too much salt is added.
Put proper amount of salt.
. Too much salt is added. . Add proper amount of salt. . Exchange the fuse with new one.
Exchange the membrance with new one.
Remove the calcium from the electrode.
Check if the membrane is correctly tted in.
Increase the setting time.
Fix the separator completely.
Fit the gasket correctly.
Action
Page 19
19
Model No. Protection Type and Class
Rated Power Supply
Power consumption
Water Supply
Dimension
Main Unit
Weight
Protection Electrode
Fully Adjustable Timer
Electrolysis Capacity
Super Oxide Water
Super Reduction Water
Alkaline Ionized Water
Acidic Ionized Water
pHDisplay
Effect and Efcacy
Manufacturing License
Product License
BTM - 3000 Class 2, Type B Medical Equiment
120V, 220~240V / 50Hz or 60Hz
25W (100W)
Reservoir Type
250(W) x 270(H) x180(D)mm (9.8 x 14.5 x 7.0 inch)
Approx. 3.0kg (6.6Ibs)
High Temperature Safety Shut Off 2 Plates
Up to 30min
Alkaline Water (2L), Acidic Water(2L)
Below pH 2.7(Above+1,200mV ORP) : on the additional salt
Above pH 11.3 (Above-650mV ORP) : on the additional salt
Above pH 9.2
Below pH 5.5
FND
Production of Portable Alkaline Ionized Water
Chronic Diarrhea, Intestnal abnormal Fermentation, Indigesstion, Gastric Hyperplasia
KFDA Manufacturing Lincenese No.889
No. 00-334
Specications of The Product
Page 20
Bion-Tech Co.,Ltd.
Bion-Tech Co., Ltd.
298-15 Gongdan-ro(Geumjeong-dong), Gunpo-si, Gyeonggi-do South Korea Tel : 82-31-459-3853 Fax 82-31-429-3859 E-mail : [email protected]
http://www.bion-tech.com (Korean) http://www.biontech.biz (English)
Quality certied company
355030001 20160816 R06
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use